Husqvarna 325RDX-Series Start and Stop, Control before starting, Start and stop, Cold engine

Page 22

START AND STOP

Control before starting

For reasons of safety follow these recommendations!

•Check the blade to ensure that no cracks have formed at the bottom of the teeth

or by the centre hole. The most common reason why cracks are formed is that sharp corners have been formed at the bottom of the teeth while sharpening or that the blade has been used with dull teeth. Discard a blade if cracks are found.

•Check that the support flange is not cracked due to

fatigue or due to being tightened too much. Discard the support flange if it is cracked.

• Ensure the locking nut has

not lost its captive force. The nut lock should have a locking force of at least 1.5 Nm. The tightening torque of the locking nut should be 35-50 Nm.

•Check that the guard is not damaged or cracked. Replace the guard if it is exposed to impact or is cracked.

•Check that the trimmer head and spray guard are not damaged or cracked. Replace the trimmer head or spray guard if they are exposed to impact or are cracked.

•Never use the machine without a guard or spray guard nor with a defective guard.

Start and stop

!WARNING!

The complete clutch cover with shaft must be fitted before the machine is started, otherwise the clutch can become loose and cause personal injury.

Always move the machine from the filling area before starting. Place the machine on a flat surface. Ensure the cutting equipment cannot come into contact with any object. Make sure no unauthorised persons are in the working area, otherwise there is a risk of serious personal injury. The safety distance is 15 metres.

Cold engine

IGNITION: Set the stop switch to the start position. CHOKE: Set the choke control in the choke position.

AIR PURGE:

Press the air purge diaphragm repeatedly until fuel begins to fill the diaphragm. The diaphragm need not be completely filled.

Warm engine Use the same starting procedure as for the cold engine, but do not set the choke control in the choke position.

For throttle handles without a start throttle lock:

The start throttle position is obtained by setting the choke control in the choke position and then returning it to its original position.

22 – English

Page 21 Page 23
Image 22
Page 21 Page 23
Contents 323R 325RX-SERIES Symbol Explanation SymbolsContents Personal protective equipment Safety InstructionsMachine‘s safety equipment Throttle trigger lockAnti-vibration system Stop switchCutting attachment guard Quick-releaseCutting equipment MufflerLocking nut Throttle trigger lock Vibration damping system Cutting equipment Grass blade Cutting equipmentSharpening Trimmer headStart General safety instructionsFuel safety Transport and storageBasic safety precautions General working instructionsBasic clearing techniques Adjusting the harness and clearing sawDesignations Clearing‘s ABC Grass clearing using a grass bladeBrush cutting using the saw blade Working methodsTrimming Grass clearing using the trimmer head and plastic bladesClearing SweepingWhat is WHAT? What is what on the brushcutter?Assembly Assembling the handlebars 323RGuard. See Technical Data Grass bladeFit the appropriate guard Assembling Adjusting the harness and clearing sawDismantling Fuel mixture Fuel HandlingFuelling Start and stop Start and StopControl before starting Cold engineStop For throttle handles with a start throttle lockStart Maintenance CarburetorAdjusting the start throttle speed Final setting of the idling speed TCorrectly adjusted carburetor High speed needleAngle gear MufflerCooling system Two-part shaftFiling the grass blade Air filter Spark plugOiling the air filter Weekly maintenance Maintenance scheduleDaily maintenance Monthly maintenanceTechnical Data Technical data 323R 325RXApproved accessories 323R Type Cutting attachment Guard Art NoEmission Control Warranty Statement Your Warranty Rights ObligationsSuper Auto Super Auto II Tri Cut Trimmy H Click Trimmy Hit Junior Trimmy Hit Pro 12 cm Trimmy SII English Page ´+H*G¶5q¨ Page 114 01 03 2002W13
Top Page Image Contents