Spa Shell Diagram

Refer to the diagram above. The function of each component is explained below.

A. The ten hydrotherapy jets provide a relaxing mas- sage action. Three of the jets are adjustable. Note: The adjustable jets can be closed and opened by pushing and pulling the nozzles. If no air flows through the jets when the air control is turned counterclockwise, simply pull the nozzles slightly.

B. The whirlpool jet directs a flow of water that cre- ates a whirlpool action in the spa.

C. The skimmer cleans the surface of the water.

D. The temperature probe reads the temperature of the water.

E. The underwater light can be used for night opera-

tion (see USING THE CONTROLS on page 12).

F. The suction vents near the floor of the spa bring water into the pump in order to operate the system. The covers should always be in place over the suc- tion vents. Never operate the spa without the suction covers in place.

G. The air control determines the amount of air flowing through the spa jets during operation (see USING THE CONTROLS on page 12).

H. The filter can be removed for cleaning or replace- ment (see CHECKING AND CLEANING THE FIL- TER on page 13).

I. The console controls the spa jets, turns the under- water light on and off, and adjusts the water temper- ature setting (see USING THE CONTROLS on page 12).

J. The diverter controls the flow of water through the hydrotherapy jets and the whirlpool jet (see USING THE CONTROLS on page 12).

SECURING THE SPA COVER ON THE SPA

To secure the spa cover, snap the latch-

es on the spa cover Latch

into the buckles on the wood panels.

The buckles can be	Key
locked by inserting the
key and turning it
clockwise 1/4 turn. To	Buckle
unlock the buckles,
insert the key and turn

it counterclockwise 1/4 turn. Always keep the buckles locked when the spa is not in use. Keep the keys in a safe place, out of the reach of children.