Panasonic EP-MA10 manual Attaching the side covers On both the right and left sides, Mark

Page 14

English

3. Attaching the side covers (On both the right and left sides)

	The method for attaching the covers is the same for both sides.	Right Side Cover	Left Side Cover
	The diagram shows the right side where the control panel stand is	Right Side Cover	Left Side Cover

	attached.


1 Insert the bottom tabs on the cover		2 Insert the top tabs into the notches on
into the bottom notches on the		the armrest.
armrest.	Right side cover		Notches
Bottom tabs

Notches

Removing the side cover

1 Insert a flat-tip screwdriver in the area above the mark ( ).

Top tabs

2

Push the cover until you hear it click.

Flat-tip screwdriver (Not included in the standard configuration)

2 Push the top tab of the cover down to lift the cover.

3 Perform the same procedures as

1 and 2 above for the other gap.

4 Pull the cover up diagonally.

•Performing this procedure with the allen key or a Phillips screwdriver could damage the unit.

•The cover can be removed with light force instead of forcing it.

1

2

Mark

4.Connect the power cord to the unit

1Check for dirt and damage on appliance inlet of the power switch section and the connector of the power cord.

2Insert the connector into the appliance inlet.

3Be sure to push the connector in all the way.

Appliance inlet

Connector

Power cord

Power switch section

13

Image 14

Contents Operating Instructions Important Safety Instructions EnglishSafety Precautions Operating Precautions Specifications Grounding InstructionsPart Names and Functions Main unitFor the sole shiatsu sheet Appliance Inlet Lock Switch Lock Switch Key TagLock Switch Key Power Switch Opening To attach the sole shiatsu sheetControl Panel Display Removing everything from the box and installing the unit Setting UP the Massage LoungerWhere to use the unit To put the unit down on the floorAllen Key Power cordArmrests Right/Left Main unit Armrest Protrusion Groove Front Protrusion AssemblyBack Armrest protrusion Unit Synthetic Protrusion LeatherFront How to tighten the screwsFasten the armrest with the attachment screws Right Side Cover Left Side Cover Appliance inlet Connector Power cord Power switch sectionAttaching the side covers On both the right and left sides Right side cover Notches Bottom tabsProjection on the inside of the holder Check the power cord and the power plug Before Sitting DownShoulders Make sure the legrest is loweredFlipping up the pillow Left and right in the upper part of the backrestPress the button to turn on the power Select the auto program you wantAdjusting shoulder position Characteristics of Auto program upper bodyAuto shut-off in auto programs Adjusting the intensity of the lower body massageCTurning off the lower body actions Stopping an auto program Immediately stopping the massageSelect the massage type you want Manual Operation for the Upper BodyPress the button Massage ActionsManual Operation for the LEG Description of Leg/foot Massage and Leg Stretch Adjusting the massage intensityAuto shut-off in leg/foot massage and leg stretch Leg/foot massagePipe and plastic areas Cleaning and MaintenanceAfter Completing the Massage Coated fabricLifting the unit How to move the unitUsing the wheels to move the unit English Move it slowly Legrest Place a mat on the floor toTroubleshooting Time Remaining Error DisplayError display Contents