Panasonic EP-MA10 manual Manual Operation for the LEG

Page 22

English

3 Adjust as you like

You can adjust the position or intensity of the massage heads, and you will hear a “beep-beep-beep” sound when it reaches its limit.

AAdjusting the Vertical Position of the Massage Heads

• Press the button once to move the position slightly [approx. 0.6 in. (1.5 cm)]. Press and

Up hold the button to move the position continuously; release the button to stop the

movement.

Down

BAdjusting the Width between Massage Heads

• Tap, Roll and Neck Shiatsu can be adjusted in 3 steps.

Increasing

Decreasing

CAdjusting the intensity of the upper body massage

	• Adjustment level of intensity is different depending on the action.
Stronger	It can be adjusted within the range of
	It can be adjusted within the range of
Weaker	the left bar of the intensity display.
Weaker

4 Auto shut-off in manual operation

•The massage will end after approximately 15 minutes and the unit will automatically shut off.

•The massage heads will move to the retracted position and stop.

•The legrest will automatically lower.

•If you want to continue using the unit, please press the button. Please rest at least 10 minutes between massages.

MANUAL OPERATION FOR THE LEG

Adjust the angle of the legrest before starting a massage. (See page 16.)

1

2

2

3

1 Press the

button.

• The power will turn off automatically if the massage does not start within 3 minutes after turning on the power.

2 A Press the Leg/foot Massage button.

BPress the Leg Stretch button.

•The air massage will begin.

•Massage intensity is displayed by the indicator.

21

Image 22

Contents Operating Instructions Important Safety Instructions EnglishSafety Precautions Operating Precautions Specifications Grounding InstructionsPart Names and Functions Main unitFor the sole shiatsu sheet Appliance Inlet Lock Switch Lock Switch Key TagLock Switch Key Power Switch Opening To attach the sole shiatsu sheetControl Panel Display Removing everything from the box and installing the unit Setting UP the Massage LoungerWhere to use the unit To put the unit down on the floorArmrests Right/Left Power cordAllen Key Main unit Armrest Protrusion Groove Front Protrusion AssemblyBack Armrest protrusion Unit Synthetic Protrusion LeatherFasten the armrest with the attachment screws How to tighten the screwsFront Right Side Cover Left Side Cover Appliance inlet Connector Power cord Power switch sectionAttaching the side covers On both the right and left sides Right side cover Notches Bottom tabsProjection on the inside of the holder Check the power cord and the power plug Before Sitting DownShoulders Make sure the legrest is loweredFlipping up the pillow Left and right in the upper part of the backrestPress the button to turn on the power Select the auto program you wantAdjusting shoulder position Characteristics of Auto program upper bodyAuto shut-off in auto programs Adjusting the intensity of the lower body massageCTurning off the lower body actions Stopping an auto program Immediately stopping the massageSelect the massage type you want Manual Operation for the Upper BodyPress the button Massage ActionsManual Operation for the LEG Description of Leg/foot Massage and Leg Stretch Adjusting the massage intensityAuto shut-off in leg/foot massage and leg stretch Leg/foot massagePipe and plastic areas Cleaning and MaintenanceAfter Completing the Massage Coated fabricLifting the unit How to move the unitUsing the wheels to move the unit English Move it slowly Legrest Place a mat on the floor toTroubleshooting Error display Contents Error DisplayTime Remaining