Ryobi Outdoor RPT2543C, RY7011 manual Technical Data, 13.3

Page 5

SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.

SYMBOL MEANING

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices which may cause property damage.

NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment.

SAVE THESE INSTRUCTIONS

 

 

TECHNICAL DATA

 

 

 

 

Weight

Without fuel and string head

4.66 Kg

 

Without fuel, w/string head

4.85 Kg

Fuel tank volume

42.5 cm3

Cutting swath

432 mm

Engine displacement

25 cm3

Maximum engine performance (in accordance with ISO 8893)

0.75 kW

Maximum rotational frequency of the spindle

9,000/min-1

Engine Speed (rotational frequency) at recommended max. spindle rotational frequency

12,500/min-1

Engine speed (rotational frequency) at idle

2,000 - 2,500/min-1

Fuel consumption (in accordance with ISO 8893) at max. engine performance

0.48 kg/h

Specific fuel consumption (in accordance with ISO 8893) at max. engine performance

0.46 kg/h

Vibration level idling

Front Handle

4.6

 

 

Rear Handle

2.8

Vibration level racing

Front Handle

13.3

 

 

Rear Handle

6.8

Sound pressure level (in accordance with EN ISO 11806:1997, ISO 7917:1987)

98

Sound power level (in accordance with ISO 10884)

110

5

Image 5
Contents OPERATOR’S Manual Safety Table of ContentsSpecific Safety Rules for Trimmer USE Symbol Name Explanation Symbols13.3 Technical DataUnpacking FeaturesInstructions Packing List for OWNER’S KITSee Figure AssemblyAssembly Instructions Silencer Guard Assembly Operating the Trimmer OperationFuel and Refuelling Advancing the String Advancing String Using the EZ Line TAP Advance SystemCutting Tips Grass Deflector Line Trimming CUT-OFF BladeTo Start a Cold Engine Starting and StoppingTo Start a Warm Engine To Stop the EngineSpool Replacement EZ Line TAP Advance System MaintenanceNEW PRE-WOUND Spool See Figures 10String Replacement Cleaning the Exhaust Port and SilencerSpark Arrester Arrows on Spool Anchor Hole First StringFuel CAP Replacing and Cleaning AIR FilterSparking Plug Storage 1 Month or LongerDealer. See Figure TroubleshootingIdle Speed Screw LO Needle High Needle Safety Directive WarrantyGuarantee Statement Rtsa / Rtuk / RTG Sound Pressure Sound Power Vibration Model Model noRyobi Technologies GmbH