Ryobi Outdoor RPT2543C, RY7011 manual Assembly Instructions, See Figure

Page 7

ASSEMBLY

ASSEMBLY INSTRUCTIONS:

GRASS DEFLECTOR

See Figure 2.

1.Remove wing nut, flat washer, lock washer and bolt from the Owner’s Kit.

2.Place grass deflector over shaft and bracket.

3.Install bolt through the slots in the tabs on grass deflector and bracket on drive shaft housing.

4.Install flat washer, lock washer and wing nut.

5.Tighten securely.

FRONT HANDLE

See Figure 3.

1.Remove the front handle, bolt and wing nut from the Owner’s Kit.

2.Install the front handle onto the top side of the drive shaft housing and move it to a comfortable position.

3.Place the bolt through the front handle as shown. Then install the wing nut.

4.Tighten the wing nut securely.

NOTE: Do not attempt to remove or modify the spacer. This spacer limits the upper position of the handle grip.

See Figure 3

GRASS DEFLECTOR

BOLT

FLAT WASHER

LOCK WASHER

WING NUT

BRACKET

Fig. 2

FRONT HANDLE

WING NUT

BOLT

Fig. 3

7

Image 7

Contents OPERATOR’S Manual Safety Table of ContentsSpecific Safety Rules for Trimmer USE Symbol Name Explanation Symbols13.3 Technical DataPacking List for OWNER’S KIT FeaturesUnpacking InstructionsAssembly Instructions AssemblySee Figure Silencer Guard Assembly Fuel and Refuelling OperationOperating the Trimmer Grass Deflector Line Trimming CUT-OFF Blade Advancing String Using the EZ Line TAP Advance SystemAdvancing the String Cutting TipsTo Stop the Engine Starting and StoppingTo Start a Cold Engine To Start a Warm EngineSee Figures 10 MaintenanceSpool Replacement EZ Line TAP Advance System NEW PRE-WOUND SpoolArrows on Spool Anchor Hole First String Cleaning the Exhaust Port and SilencerString Replacement Spark ArresterStorage 1 Month or Longer Replacing and Cleaning AIR FilterFuel CAP Sparking PlugDealer. See Figure TroubleshootingIdle Speed Screw LO Needle High Needle Sound Pressure Sound Power Vibration Model Model no WarrantySafety Directive Guarantee Statement Rtsa / Rtuk / RTGRyobi Technologies GmbH