Ryobi Outdoor RY70107A, PBC3046B manual Fuel CAP, Sparking Plug, Storage 1 Month or Longer

Page 18

MAINTENANCE

FUEL CAP

WARNING:

A leaking fuel cap is a fire hazard and must be replaced immediately.

The fuel cap contains a non-serviceable filter and a check valve. A clogged fuel filter will cause poor engine perfor- mance. If performance improves when the fuel cap is loosened, the check valve may be faulty or the filter clogged. Replace fuel cap if required.

SPARKING PLUG

This engine uses a Champion RCJ-6Y with 0.63 mm (0.025 in) electrode gap. Use an exact replacement and replace annually.

STORAGE (1 MONTH OR LONGER)

1.Drain all fuel from tank into a container approved for petrol. Run engine until it stops.

2.Clean all foreign material from the trimmer. Store it in a well-ventilated place that is inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts.

3.Cover the blade with the blade protector before storing the unit or during transport.

4.Abide by all ISO and local regulations for the safe storage and handling of petrol. Excess fuel should be used up in other 2-cycle engine-powered equipment.

18

Image 18
Contents OPERATOR’S Manual Table of Contents SafetySpecific Safety Rules for Trimmer USE Specific Safety Rules for Brushcutter and Blade USESymbols Symbol Name ExplanationTechnical Data Symbol NameInstructions FeaturesUnpacking Packing List for OWNER’S KITSee Figure AssemblyHandle Throttle Trigger TOP Clamp Handle BAR BottomAttaching the Shoulder Strap Silencer Guard AssemblyBent END Silencer Guard Opening in Rear Housing Grass Deflector and Blade Guard USEBlade Guard Grass DeflectorConverting from Trimmer to Brushcutter Converting from Brushcutter to Trimmer Installing the BladeInstalling the String Head Removing the BladeOperation Fuel and RefuellingOperating the Trimmer Advancing the String Cutting TipsGrass Deflector Line Trimming CUT- OFF Blade Operating the Brushcutter TRI-ARC BladeCutting Technique Blade To Start a Cold Engine Starting and StoppingSee Figures 14 To Start a Warm EngineNEW PRE-WOUND Spool MaintenanceSpool Replacement EZ Line TAP Advance System See Figures 16Blade Protector Spark Arrester Cleaning the Exhaust Port and SilencerReplacing and Cleaning AIR Filter See Figures 23Fuel CAP Sparking PlugStorage 1 Month or Longer Troubleshooting Idle speed. See FigureIdle Speed Screw Needle Guarantee Statement Rtsa / Rtuk / RTG WarrantySafety Directive EC Declaration of ConformityRyobi Technologies GmbH