Ryobi Outdoor PBC3046B, RY70107A manual Technical Data, Symbol Name

Page 5

SYMBOLS

SYMBOL

NAME

EXPLANATION

Switch

On/Off Switch I = ON to Run O = OFF to Stop

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.

SYMBOL MEANING

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in

serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices that may cause property damage.

NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment.

SAVE THESE INSTRUCTIONS

TECHNICAL DATA

Weight

Without fuel, cutting attachment

6.03 Kg

 

With blade

...........................................................................................................................................

6.35 Kg

 

With string head

6.22 Kg

Fuel tank volume

42.5 cm3

Cutting swath

457 mm

Engine displacement

30 cm3

Maximum engine performance (in accordance with ISO 8893)

0.78 kW

Maximum rotational frequency of the spindle

10,000/min-1

Engine Speed (rotational frequency) at recommended max. spindle rotational frequency

12,500/min-1

Engine speed (rotational frequency) at idle

2,000 - 2,500/min-1

Fuel consumption (in accordance with ISO 8893) at max. engine performance

0.52 kg/h

Specific fuel consumption (in accordance with ISO 8893) at max. engine performance

0.47 kg/h

Vibration level idling

Left Handle

6.0

 

 

Right Handle

7.8

Vibration level racing

Left Handle

5.1

 

 

Right Handle

6.0

Sound pressure level (in accordance with EN ISO 11806:1997, ISO 7917:1987)

99

Sound power level (in accordance with ISO 10884)

112

 

 

5

 

Page 4 Page 6
Image 5
Page 4 Page 6
Contents OPERATOR’S Manual Safety Table of ContentsSpecific Safety Rules for Brushcutter and Blade USE Specific Safety Rules for Trimmer USESymbol Name Explanation SymbolsSymbol Name Technical DataUnpacking FeaturesInstructions Packing List for OWNER’S KITHandle AssemblySee Figure Throttle Trigger TOP Clamp Handle BAR BottomBent END Silencer Guard Opening in Rear Housing Silencer Guard AssemblyAttaching the Shoulder Strap Grass Deflector and Blade Guard USEConverting from Trimmer to Brushcutter Blade GuardGrass Deflector Installing the String Head Installing the BladeConverting from Brushcutter to Trimmer Removing the BladeOperating the Trimmer OperationFuel and Refuelling Grass Deflector Line Trimming CUT- OFF Blade Advancing the StringCutting Tips Cutting Technique Blade Operating the BrushcutterTRI-ARC Blade See Figures 14 Starting and StoppingTo Start a Cold Engine To Start a Warm EngineSpool Replacement EZ Line TAP Advance System MaintenanceNEW PRE-WOUND Spool See Figures 16Blade Protector Replacing and Cleaning AIR Filter Cleaning the Exhaust Port and SilencerSpark Arrester See Figures 23Storage 1 Month or Longer Fuel CAPSparking Plug Idle speed. See Figure TroubleshootingIdle Speed Screw Needle Safety Directive WarrantyGuarantee Statement Rtsa / Rtuk / RTG EC Declaration of ConformityRyobi Technologies GmbH
Top Page Image Contents