Ryobi Outdoor CS30 RY30020A, SS30 RY30040A, BC30 RY30060A manual Specific Safety Rules

Page 4

SPECIFIC SAFETY RULES

SPECIFIC SAFETY RULES FOR TRIMMER USE

nReplace string head if cracked, chipped, or damaged in any way. Be sure the string head or blade is properly installed and securely fastened. Failure to do so can cause serious injury.

nMake sure all guards, straps, deflectors, and handles are properly and securely attached.

nUse only the manufacturer’s replacement string in the cutting head. Do not use any other cutting attachment. To install any other brand of cutting head to this string trimmer can result in serious personal injury.

nNever operate unit without the grass deflector in place and in good condition.

nMaintain a firm grip on both handles while trimming. Keep string head below waist level. Never cut with the string head located over 76 cm (30 in.) or more above the ground.

SPECIFIC SAFETY RULES FOR BRUSH- CUTTER AND BLADE USE

nAfter engine stops, keep rotating blade in thicker weeds or pulpy stalks until it stops.

nDo not operate the brushcutter unless the brushcutter guard is firmly secured in place and in good condition.

nUse heavy gloves when operating the brushcutter and when installing or removing blades.

nAlways stop the engine and remove the spark plug wire before attempting to remove any obstruction caught or jammed in the blade or before removing and installing the blade.

nDo not attempt to touch or stop the blade when it is rotating.

nA coasting blade can cause injury while it continues to spin after the engine is stopped or throttle trigger

released. Maintain proper control until the blade has completely stopped rotating.

nReplace any blade that has been damaged. Always make sure blade is installed correctly and securely fastened before each use. Failure to do so can cause serious injury.

nUse only the manufacturer’s replacement Tri-Arc®blade intended for use on this brushcutter. Do not use any other blade. To install any other brand blade or cutting head to this brushcutter can result in serious personal injury.

nThe Tri-Arc®blade is suited for cutting thicker weeds or pulpy stalks only. Do not use for any other purpose. Never use the Tri-Arc®blade to cut woody brush.

nExercise extreme caution when using the blade with this unit. Blade thrust is the reaction that may occur when the spinning blade contacts anything it cannot cut. This contact may cause the blade to stop for an instant, and suddenly “thrust” the unit away from the object that was hit. This reaction can be violent enough to cause the op- erator to lose control of the unit. Blade thrust can occur without warning if the blade snags, stalls, or binds. This is more likely to occur in areas where it is difficult to see the material being cut. For cutting ease and safety, approach the weeds being cut from the right to the left. In the event an unexpected object or woody stock is encountered, this could minimize the blade thrust reaction.

nNever cut any material over 13 mm (1/2 in.) diameter.

nAlways wear the shoulder harness when using the brush- cutter and adjust to a comfortable operating position. Maintain a firm grip on both handles while cutting with a blade. Keep the blade away from your body and below waist level.

nNever use the brushcutter with the blade located 76 cm (30 in.) or more above the ground level.

Page 4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Read ALL InstructionsSpecific Safety Rules for Trimmer USE Specific Safety RulesSpecific Safety Rules for BRUSH- Cutter and Blade USE Symbols Symbol Name ExplanationService Knob Starter Grip Rope Rear Handle Trigger Lock Primer BulbString Head Features Assembly Installing the Power Head to the Attachment Removing the Attachment from the Power HeadAttaching the Storage Hanger See FigureAttaching the Front Handle CS30 and SS30 Attaching the J Handle BC30Attaching the Grass Deflector To Attach the Curved Shaft Grass Deflector CS30To Attach the Straight Shaft Grass Deflector SS30 Attaching the Brushcutter Guard BC30Attaching the Shoulder Harness BC30 Converting from Brushcutter to String Trimmer BC30Removing the TRI-ARCBLADE and Brushcutter Guard Converting from String Trimmer to Brushcutter BC30Operation Installing the TRI-ARCBLADE and Brushcutter GuardRemoving the Straight Shaft Grass Deflector and String Head Fueling and Refueling the Trimmer Operating the TrimmerTo Advance the Cutting Line To Advance the Cutting Line ManuallyCutting Tips Grass Deflector Line Trimming CUT-OFF BladeOperating the Brushcutter Blade ThrustTRI-ARCBLADE Cutting Technique BladeStarting and Stopping See Figures 21Maintenance General MaintenanceSpool Replacement See Figures 24String Replacement See Figures 26Arrows on Spool Anchor Hole First String SlotCleaning the Exhaust Port and Muffler Spark Arrestor Replacing and Cleaning AIR FilterFuel CAP Spark PlugSpeed. See Figure TroubleshootingIdle Speed Screw Warranty Limited Warranty Statement MANUFACTURER’S Warranty Coverage OWNER’S Warranty ResponsibilitiesMaintenance Requirements CoverageService

CS30 RY30020A, SS30 RY30040A, BC30 RY30060A specifications

The Ryobi Outdoor tools series, featuring the CS30 RY30020A, SS30 RY30040A, and BC30 RY30060A, delivers robust power and convenience for all your gardening and landscaping needs. Known for their reliability and innovative technology, these tools embody Ryobi's commitment to enhancing outdoor experiences.

The CS30 RY30020A is a powerful cordless chainsaw designed for effortless cutting. Equipped with a brushless motor, it delivers high performance and extended runtime, making it ideal for tasks like limbing and pruning. Its lightweight design ensures ease of use, reducing fatigue during prolonged operation. The tool features an automatic oiler that keeps the chain lubricated, enhancing longevity and performance. Additionally, the 10-inch bar and chain offer an excellent balance of maneuverability and cutting capacity, suitable for various wood sizes.

Moving on to the SS30 RY30040A, this string trimmer is engineered for versatility and comfort. The innovative design includes a curved shaft that offers better visibility and control while trimming. The electric motor provides consistent power without the hassle of gas or oil, making it an environmentally friendly option. The SS30 is equipped with a ReelEasy line feeding system, allowing for quick and easy line replacement. With adjustable handles and an ergonomic design, users can easily customize the trimmer for optimal comfort, reducing strain during extended use.

Finally, the BC30 RY30060A brush cutter is an essential tool for tackling overgrown areas and thick brush. Its powerful motor can handle tougher vegetation, while the dual-blade system ensures efficient cutting. The shaft design offers superior reach, making it possible to access hard-to-reach areas easily. The BC30 also features a comfortable grip and shoulder harness, improving stability and reducing fatigue for the user.

All three models are backed by Ryobi's dedication to quality, offering tools that are not only durable but also easy to maintain. With their lightweight construction, advanced technologies, and user-friendly features, the CS30, SS30, and BC30 are perfect companions for anyone seeking to elevate their outdoor maintenance projects while enjoying the benefits of cordless technology. Whether you are a homeowner or a professional landscaper, these Ryobi tools provide reliable performance and efficiency to tackle any outdoor task with confidence.
Top Page Image Contents