Ryobi Outdoor CS30 RY30020A, SS30 RY30040A, BC30 RY30060A manual Attaching the Grass Deflector

ASSEMBLY

ATTACHING THE GRASS DEFLECTOR

WARNING:

The line cutting blade on the grass deflector is sharp. Avoid contact with the blade. Failure to avoid contact can result in serious personal injury.

TO ATTACH THE CURVED SHAFT GRASS DEFLECTOR - CS30

See Figure 6.

nPress the grass deflector onto the bottom of the curved shaft as shown.

nInsert the hex screw through the grass deflector and the bracket on the curved shaft.

nPlace the flat washer and lock washer on the hex head cap screw.

nPlace the wing nut on the hex head cap screw and tighten securely.

TO ATTACH THE STRAIGHT SHAFT GRASS DEFLECTOR - SS30

See Figure 7.

n Remove the slotted hex head screw from the grass deflector.

nInsert the tab on the mounting bracket in the slot on the grass deflector.

nAlign the screw hole in the mounting bracket with the screw hole in the grass deflector.

nInsert the slotted hex head screw through the mounting bracket and into the grass deflector.

nTighten the screw securely.

ATTACHING THE BRUSHCUTTER GUARD - BC30

See Figure 8.

The guard is shipped installed on these brushcutter models. Instructions have been included for reference when changing from string trimmer operation back to brushcutter operation.

nWith the string head removed, place the brushcutter guard on the gear head as shown.

nInstall the three screws from bottom through the guard and into the gear head.

nTighten the screws securely and torque to 40-50 in.lb. minimum.

HEX

SCREWGRASS DEFLECTOR

BRACKET

	LOCK
	WASHER
FLAT
WASHER	WING NUT
	Fig. 6
	HEX HEAD
	SCREW

STRAIGHT

SHAFT GRASSTAB

DEFLECTOR

SLOT

Fig. 7

GEAR	BRUSHCUTTER GUARD
HEAD

HEX HEAD

SCREW

Fig. 8

Page 12