Ryobi RY09800 manuel dutilisation Specific Safety Rules, Refueling

Page 5

specific SAFETY RULES

To reduce the risk of hearing loss associated with sound level(s), hearing protection is required.

To reduce the risk of injury associated with contacting rotating parts, stop the engine before installing or removing attachments. Do not operate without guard(s) in place. Always disconnect the spark plug before performing maintenance or accessing any movable parts.

Rotating impeller blades can cause severe injury. Do not put hands or any other object into the blower housing air outlet or blower tubes.

Do not point the blower nozzle in the direction of people or pets.

Never run the unit without the blower tubes installed.

Never place objects inside the blower tubes.

Never use blower near fires, fireplaces, hot ashes, bar- becue pits, etc., which may cause fire to spread.

Never place blower on any surface, except a hard, clean surface when engine is running. Gravel, sand, and other debris can be picked up by the air inlet and thrown at the operator or bystanders, causing possible serious injuries.

Never use for spreading chemicals, fertilizers, toxic sub- stances, or any other hazardous chemical.

Always hold the throttle control handle in your right hand. Refer to the Operation section later in this manual for additional information.

refueling

Fuel is highly flammable. Take precautions when using to reduce the chance of serious personal injury.

Empty fuel tank and restrain the unit from moving before transporting in a vehicle.

To reduce the risk of fire and burn injury, handle fuel with care. It is highly flammable.

Do not smoke while handling fuel.

Mix and store fuel in a container approved for gasoline.

Mix fuel outdoors where there are no sparks or flames.

Select bare ground, stop engine, and allow to cool before refueling.

Loosen fuel cap slowly to release pressure and to keep fuel from escaping around the cap.

Tighten the fuel cap securely after refueling.

Wipe spilled fuel from the unit. Move 30 feet away from refueling site before starting engine.

Never attempt to burn off spilled fuel under any circum- stances.

Store fuel in a cool, well-ventilated area, safely away from spark and/or flame-producing equipment.

Store fuel in containers specifically designed for this purpose.

Only refuel outdoors and do not smoke while refueling­.

Add fuel before starting the engine. Never remove the cap of the fuel tank or add fuel while the engine is running or when the engine is hot.

If fuel is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating any source of ignition until fuel vapors have dissipated.

Replace all fuel tank and container caps securely.

When draining the fuel tank, use an approved fuel storage container while in a well-ventilated area.

Save these instructions. Refer to them frequently and use them to instruct others who may use this product. If you loan someone this product, loan them these instructions also.

4 — English

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Save this Manual for Future Reference OPERATOR’S ManualRUN Position Position de Étranglement Posición de AnegaciónTable of Contents Service General Safety RulesRefueling Specific Safety RulesSymbol Name Explanation SymbolsSymbol Signal Meaning Assembly FeaturesAdjusting Throttle control handle Adjusting Harness and waist StrapsAssembling the blower tubes See Figures 3Applications OperationFueling and Refueling the blower Oxygenated FuelsIf assistance is required Starting this product Starting and StoppingOperating the Blower See Figures 7Maintenance This product was manufactured with a catalyst muffler Problem Possible Cause Solution TroubleshootingLimited Warranty Statement WarrantyMANUFACTURER’S Warranty Coverage English Dépannage Règles DE Sécurité GénéralesAVERTISSEMENT  Ravitaillement en carburant Règles DE Sécurité ParticulièresSymbole Signal Signification SymbolesSymbole NOM Explication Aura pour conséquences des blessures graves ou mortellesAssemblage CaractéristiquesAssemblage DES Tubes DE Soufflante Réglage DE LA Poignée DE Commande D’ACCÉLÉRATEURRéglage DES Sangles DE Harnais ET DE Ceinture Voir les figures 3Avertissement UtilisationApprovisionnement Et Carburant Carburants OxygénésRégulateur DE Vitesse Démarrage ET ArrêtFuncionamiento DE LA Sopladora Entretien 860 ’AIDEProgramme D’ENTRETIEN DU Système D’ÉMISSIONS Le moteur ne démarre pas Pas d’étincelle DépannageÉnoncé DE LA Garantie Limitée GarantieResponsabilités DU Propriétaire Dans LE Cadre DE LA Garantie Français Servicio Reglas DE Seguridad GeneralesAdvertencia Reabastecimiento de combustible Reglas DE Seguridad EspecíficasPeligro SímbolosPrecaución Símbolo Señal SignificadoArmado CaracterísticasAjuste del arnés y las correas de la cintura Montaje DE LOS Tubos DE LA SopladoraAjuste del mango de control del acelerador Vea las figuras 3Aplicaciones FuncionamientoLlenado DEL Tanque Mezcla DE CombustibleUtilisation DE LA Soufflante Parranque Y ApagadoControl DE Crucero Vea las figuras 7Mantenimiento 4050 Programa DE Mantenimiento Para EL Control DE EmisionesConjunto DE Silenciador Catalítico Problema Causa Posible Solución Solución DE ProblemasDeclaración DE LA Garantía Limitada GarantíaCobertura DE LA Garantía DEL Fabricante Notas Notas Notas Soufflante Dorsale 30cc Sopladora DE Mochila 30cc Manuel D’UTILISATION / Manual DEL OperadorCalifornia Proposition Proposition 65 DE L’ÉTAT DE Californie

RY09800 specifications

The Ryobi RY09800 is a versatile and efficient gas-powered string trimmer designed for tackling a variety of landscaping tasks. It stands out in the market due to its innovative features, user-friendly design, and robust performance.

One of the main features of the RY09800 is its powerful 31cc 2-cycle engine, delivering a commendable power-to-weight ratio. This allows for effortless trimming of grass and weeds, making it ideal for both residential and commercial applications. The engine is designed for easy start-up, reducing frustration for users who want to get to work quickly.

The RY09800 incorporates a dual-line bump feed head, which allows for quick and easy loading of trimmer line. This feature is particularly useful for those who regularly need to replace or adjust the cutting line, ensuring minimal downtime during yard maintenance. The bump feed system ensures that users can extend the line simply by tapping the head against the ground, making the process intuitive and efficient.

Comfort is a priority for the design of the RY09800, which features an adjustable straight shaft. This design allows for a customizable fit, helping users maintain proper posture and reducing fatigue during extended use. The handle is ergonomically designed to provide a secure grip, further enhancing user comfort while manipulating the trimmer.

In terms of technology, the RY09800 employs a turbo-style oscillating head that improves cutting performance by providing a powerful, consistent line speed. This means users can achieve cleaner cuts and tackle tougher weeds more effectively. Additionally, the lightweight construction of the trimmer facilitates easier maneuverability, enabling it to navigate around obstacles and tight spaces.

Another noteworthy characteristic of the RY09800 is its reduced noise emissions compared to traditional gas string trimmers. This feature makes it a suitable option for use in residential neighborhoods or during early morning hours when loud machinery could be disruptive.

Overall, the Ryobi RY09800 is a reliable and efficient tool for anyone looking to maintain their yard with ease. Its combination of power, user-friendly features, and innovative technologies makes it a valuable addition to any landscaper’s toolkit. Whether for small gardens or larger properties, this trimmer is designed to meet the varying demands of outdoor maintenance tasks.
Top Page Image Contents