OIL AND FUEL INFORMATION
OIL AND FUEL MIXING INSTRUCTIONS
Old and/or improperly mixed fuel are the main reasons for the unit not running properly. Be sure to use fresh, clean unleaded fuel. Follow the instructions carefully for the proper fuel/oil mixture.
Definition of Blended Fuels
Today's fuels are often a blend of gasoline and oxy- genates such as ethanol, methanol or MTBE (ether).
Using Blended Fuels
If you choose to use a blended fuel, or its use is unavoidable, follow recommended precautions.
•Always use fresh fuel mix per your operator's manual.
•Use the fuel additive
•Always agitate the fuel mix before fueling the unit.
•Drain the tank and run the engine dry before storing the unit.
Using Fuel Additives
The use of fuel additive, such as
CAUTION: For proper engine operation and maximum reliability, pay strict attention to the oil and fuel mixing instructions on the
Thoroughly mix the proper ratio of
NOTE: One gallon (3.8 liters) of unleaded gasoline mixed with one 4 oz. (120 ml.) bottle of RYOBI 2 CYCLE OIL makes a 32:1 fuel/oil ratio.
+
UNLEADED GAS | RYOBI 2 CYCLE OIL |
1 US. GALLON + 4.0 FL. OZ. | |
(3.8 LITERS) | (120 ml) |
1 LITER + 30 ml
MIXING RATIO - 32:1
WARNING: Gasoline is extremely flammable. Ignited Vapors may explode. Always stop the engine and allow it to cool before filling the fuel tank. Do not smoke while filling the tank. Keep sparks and open flames at a distance from the area.
WARNING: Remove fuel cap slowly to avoid injury from fuel spray. Never operate the unit without the fuel cap securely in place.
WARNING: Add fuel in a clean, well ventilated area outdoors. Wipe up any spilled fuel immediately. Avoid creating a source of ignition for spilt fuel. Do not start the engine until fuel vapors dissipate.
NOTE: Dispose of the old fuel/oil mix in accordance to Federal, State, and Local regulations.
FILLING THE FUEL TANK
Fill or add fuel to the tank only when the cultivator is in a horizontal position (Fig. 13).
Fig. 13
11