Ryobi Outdoor RY08570 Product Specifications, Harness Height, Adjustments, Waist Harness Bellows

Page 7

MESH

BACKING

ENGINE

SWITCH

STRAIGHT TUBE

(UPPER TUBE)

CABLE TIE

WAIST

	THROTTLE	NOZZLE
THROTTLE HANDLE	TRIGGER	(LOWER TUBE)

THROTTLE CONTROL HANDLE TUBE
(UPPER TUBE)	Fig. 1

Image 7

Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsService General Safety RulesRefueling Specific Safety RulesSymbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Waist Harness Bellows Product SpecificationsAdjustments Harness HeightAssembly FeaturesThrottle Cable Cable TIE Assembling the Blower TubesElbow Tube Bellows Throttle Control Handle Tube Upper Tube NozzleMixing the Fuel Adjusting Harness and Waist StrapsAdjusting Throttle Control Handle OperationChoke Chokelever Lever Engine SwitchFilling the Tank Starting and StoppingThrottle Trigger Operating the BlowerTo engage the cruise control / throttle lock See Figure Proper Operating PositionTo clean the air filter MaintenanceGeneral Maintenance Replacing and Cleaning AIR FilterSpark Plug Cleaning the Exhaust Port and MufflerSpark Arrestor Fuel CAPTroubleshooting AccessoriesAccessories Limited Warranty Statement WarrantyCoverage MANUFACTURER’S Warranty CoverageOWNER’S Warranty Responsibilities Maintenance RequirementsThis Product WAS Manufactured with a Catalyst Muffler Page California Proposition Service Model NO. and Serial no