Ryobi Outdoor RY08570 manual Features, Assembly

Page 8

FEATURES

KNOW YOUR BLOWER

See Figure 1.

Before attempting to use this product, familiarize yourself with all operating features and safety rules.

MOTOR

The blower has a powerful 25.4cc engine with sufficient power to handle tough jobs.

CRUISE CONTROL / THROTTLE LOCK

The Cruise Control (throttle lock) feature allows the user to operate the blower without holding the throttle trigger.

ADJUSTABLE THROTTLE CONTROL HANDLE

Adjust the throttle control handle easily by loosening handle knob, allowing user to position handle in desired location.

THROTTLE TRIGGER

The blower can be operated at any speed between idle and full throttle.

ADJUSTABLE HARNESS AND WAIST STRAPS

The blower comes with fully adjustable harness and waist straps to ensure user comfort and ease of operation.

MESH BACKING

The blower comes equipped with a mesh backing which aids in user comfort.

BLOWER TUBES

The blower tubes can be assembled and installed on the blower without using tools.

ASSEMBLY

UNPACKING

This product requires assembly.

nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.

nInspect the tool carefully to make sure no breakage or damage occurred during shipping.

nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.

nIf any parts are damaged or missing, please call 1-800-860-4050 for assistance.

PACKING LIST

Backpack Blower Elbow

Bellows

Throttle Control Handle Tube (Upper Tube) Straight Tube (Upper Tube)

Cable Tie (2)

Nozzle Tube (Lower Tube)

2-Cycle Engine Oil

Operator’s Manual

NOTE: Read and remove all hang tags and store with your operator's manual.

WARNING:

If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.

WARNING:

Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

WARNING:

To prevent accidental starting that could cause serious personal injury, always disconnect the engine spark plug wire from the spark plug when assembling parts.

8

Image 8
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules ServiceSpecific Safety Rules RefuelingSymbols Symbol Name DESIGNATION/EXPLANATIONSymbol Signal Meaning Product Specifications AdjustmentsHarness Height Waist Harness BellowsFeatures AssemblyAssembling the Blower Tubes Elbow Tube BellowsThrottle Control Handle Tube Upper Tube Nozzle Throttle Cable Cable TIEAdjusting Harness and Waist Straps Adjusting Throttle Control HandleOperation Mixing the FuelEngine Switch Filling the TankStarting and Stopping Choke Chokelever LeverOperating the Blower To engage the cruise control / throttle lock See FigureProper Operating Position Throttle TriggerMaintenance General MaintenanceReplacing and Cleaning AIR Filter To clean the air filterCleaning the Exhaust Port and Muffler Spark ArrestorFuel CAP Spark PlugAccessories AccessoriesTroubleshooting Warranty Limited Warranty StatementMANUFACTURER’S Warranty Coverage OWNER’S Warranty ResponsibilitiesMaintenance Requirements CoverageThis Product WAS Manufactured with a Catalyst Muffler Page Service Model NO. and Serial no California Proposition