❹ HOW IT Works, Vacuuming | Patriot Products 5F, 6F, 8F, 10F

“QUICK-FEED” PRUN-

INGS DOWN THE LEFT SIDE OF THE SHREDDER WITH A LOOSE, OPEN GRIP.

▲CAUTION: DO NOT LET GO OF BULKY ! WASTE AND LET IT BOUNCE AROUND IN THE HOPPERS. IT MAY DAMAGE THE MACHINE OR BE EJECTED TOWARD THE OPERATOR OR

BYSTANDERS AND CAUSE INJURY.

				page 12
Vacuuming

VACUUM (15-ft. kit optional)		HP	CAPACITY	TYPE OF DISCHARGE
Dry to wet leaves,	5, 6, 8 & 10		Loose waste	Fine mulch (leaves),
pine straw, sawdust,				some fingerling shreds.
grass clippings.
grass clippings.

VACUUMING TIPS

•Keep the hose straight or slightly curved along the ground.

•Allow nozzle to hover over the waste, rather than sticking it into the pile.

•If the vacuum loses power, there may be a clog in the nozzle or in the throat of the shredder hopper. Lift the hose over your head and shake it. You may need to shut down, unplug the adaptor and unclog the shredder’s throat.

•Don’t let the hose come in contact with the muffler. The muffler can get hot enough to melt it.

❹HOW IT WORKS

Direct-Bagging

The chipper-shredder-vac must be operated with the bag in place. The bag holds over two bushels, but emptying it often is a good habit. If it overfills, debris may back up into the discharge chute and stall the engine—just like a lawn mower does when it’s bag gets too full.

Great will be the temptation...but do not begin to remove the bag until the engine is shut off and the rotor has stopped.

Chipping

Waste fed down the chipper cone produces uniform, coin-sized chips. Two sharp knives, mounted on the rotor, pass by the cone’s solid base at more than 3750 RPM, slicing the end of the branch into little chips.

The angle of the knives draws branches in as they are cut. Eventually, the knives become dull. They must be removed and re-sharpened. Replace the knives when their cutting surface nears one-eighth inch from the knives’ mounting holes.

Shredding

The shredder uses six Y-shaped hammers and the built-in vacuum to pull waste into the grinder housing. The shredding hammers attached to the rotor grab onto thicker debris. Material is ground and shredded until it is small enough to be pulled into the fan chamber and discharged into the bag.

The rotor spins clockwise (as you stand behind the machine). The hammers swing freely on shafts a full 360°. If material is too heavy to shred on the first strike, they swing out of the way. The Y-forks do the shredding and pulling. (Technically speaking, green debris is said to be “shredded”; drier, leafier debris is “ground”.) Hammers eventually wear down and can be replaced or simply reversed.

Vacuuming

The four blade vacuum draws air into the housings through the shredder hop- per and chipper cone. To take full advantage of this air flow system, the optional vacuum kit snaps into the hopper for a 15’ reach around the machine.

5F, 6F, 8F, 10F specifications

Patriot Products is renowned for its innovative line of chipper shredders, with models such as the 5F, 6F, 8F, and 10F standing out for their performance and reliability in yard maintenance. These machines are designed to efficiently reduce yard waste into mulch, making them an essential tool for homeowners and landscapers alike.

The Patriot Products 5F model features a robust 14-amp electric motor, allowing it to handle branches up to 2 inches in diameter with ease. Its compact design makes it perfect for small to medium-sized yards, delivering a powerful performance without the need for gas or oil. The 5F is equipped with a patented cutting system that ensures a clean, quick cut, reducing the strain on the motor and extending its lifespan. Additionally, it can produce up to 20 bags of mulch from one load, making it highly efficient for yard clean-up tasks.

Moving on to the 6F model, it presents a step up in capacity and power. With a 15-amp electric motor, the machine can shred branches up to 2.5 inches thick. One of the main features of the 6F is its unique feed chute design, which allows for easy and safe feeding of materials. The dual-blade cutting system enhances its performance, ensuring that even tough materials are processed effectively. This model is ideal for slightly larger properties or those with more extensive landscaping.

The 8F model introduces a larger size and enhanced capability, featuring a potent 18-amp motor that can tackle branches up to 3 inches in diameter. The 8F is designed for heavy-duty use, making it suitable for both residential and commercial applications. Its improved shredding technology allows for finer mulch, improving the quality of the output, which can be beneficial for gardens and landscaping. The machine's sturdy wheels provide excellent mobility, ensuring that transporting it across your property is effortless.

Finally, the 10F model represents the pinnacle of Patriot Products' chipper shredder line. With a powerful 21-amp motor, it can handle branches up to 3 inches thick seamlessly. The 10F features a unique design that minimizes clogging, allowing for continuous operation without interruptions. This model includes advanced safety features, such as an automatic shut-off system, providing peace of mind during operation. Its larger capacity means it can produce an impressive amount of mulch, making it an excellent choice for large properties or landscaping projects.

In conclusion, the 5F, 6F, 8F, and 10F models from Patriot Products offer a range of features and technologies tailored to meet various yard maintenance needs. With their emphasis on performance, efficiency, and safety, these chipper shredders are invaluable assets for effective yard management. Whether tackling simple yard clean-ups or more extensive landscaping tasks, any of these models deliver dependable results that are sure to impress.