Patriot Products 5F, 6F, 8F, 10F manual ❽ TROUBLE-SHOOTER, Damage and Serious Personal Injury

Page 21

TROUBLE-SHOOTER

 

CAUTION: BEFORE ATTEMPTING TO REMEDY PROBLEMS WITH YOUR CHIPPER-SHREDDER-VAC, TURN THE ENGINE OFF, WAIT FOR THE ROTOR TO

 

 

!

 

 

STOP TURNING, AND DISCONNECT THE SPARK PLUG WIRE. FAILURE TO DO SO CONSTITUTES NEGLIGENT BEHAVIOR AND MAY RESULT IN PROPERTY

 

 

 

DAMAGE AND SERIOUS PERSONAL INJURY.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROBLEM

CAUSE

REMEDY

 

 

 

 

 

 

 

Engine won’t start.Check fuel, oil, choke, and spark plug wire.

Grinds, smokes, stalls. Old gas, dirty oil or air filter, bad plug.

That was easy enough!

Drain or run out old gas. Change oil and filter. Replace spark plug.

Unusual vibration,

Sticky debris lodged on rotor.

rubbing noises.

Chipper knife is loose.

 

Damaged knives, hammers, or rotor.

Clear debris out of discharge area.

Check fasteners and knives for damage. Re-secure and/or repair.

Check the rotor for balance by watching it turn while slowly pulling the cord. If it wobbles, see a Patriot service center immediately.

Debris does not chip easily. Throttle speed too low. Engine problem.

Dull or damaged knives.

Wood is dead, old, takes more effort.

Feeding rate too fast for discharge rate.

Run at maximum throttle.

Sharpen or replace immediately!

Alternate with green waste to keep knives cool and sharp.

Feed thicker waste at a slower rate.

Clogs while shredding,

Debris may be too bulky or wet.

Feed more slowly. Add dry stuff.

not vacuuming well.

Hammers worn, broken.

Replace the hammers.

 

Debris stuck in grinder housing.

Shut down. Unclog or run water

 

 

 

down the shredder.

Chronic clogging,

Engine not up to par.

vibration, rattling.

Internal damage or failure to rotor.

Contact an engine service center.

Contact a Patriot service center.

NOTES/SERVICE HISTORY

Image 21
Contents N U a L Contents These Your Safety OperatingTriangles Property DamageHow Do I File a Claim? What About Engine or Starting Problems?How Long Will It Take? What About Professional or Commercial Use?Shredder Spark Plug Wire ThrottleHopper Discharge ChuteOther Maintenance Safety & MaintenanceFire and Burn Hazards Carbon Monoxide Hazards❶ Safety ❷ Assembly Don’t Have a Seizure Engine ControlsFire and Emissions ! Warnings First 15-ft. Vac Kit Assembly OptionalSafe Operating Conditions ❸ OperationChipping Shredding❹ HOW IT Works VacuumingDirect-Bagging ❺ Maintenance Maintain These Safety Devices Correct Staggering of HAM Mers Landscape & Garden Bitten by the Bug?Composting How Long Until Soup’s On?Engine MOUNT/AXLE, 10 HP ❼ Illustrated Parts ListEven After the Engine Rear ViewTURNING,IT MAY Cause Serious Personal Injury Front ViewRotor Will Coast Even After MakeMAY Damage and Serious Personal Injury ❽ TROUBLE-SHOOTER

5F, 6F, 8F, 10F specifications

Patriot Products is renowned for its innovative line of chipper shredders, with models such as the 5F, 6F, 8F, and 10F standing out for their performance and reliability in yard maintenance. These machines are designed to efficiently reduce yard waste into mulch, making them an essential tool for homeowners and landscapers alike.

The Patriot Products 5F model features a robust 14-amp electric motor, allowing it to handle branches up to 2 inches in diameter with ease. Its compact design makes it perfect for small to medium-sized yards, delivering a powerful performance without the need for gas or oil. The 5F is equipped with a patented cutting system that ensures a clean, quick cut, reducing the strain on the motor and extending its lifespan. Additionally, it can produce up to 20 bags of mulch from one load, making it highly efficient for yard clean-up tasks.

Moving on to the 6F model, it presents a step up in capacity and power. With a 15-amp electric motor, the machine can shred branches up to 2.5 inches thick. One of the main features of the 6F is its unique feed chute design, which allows for easy and safe feeding of materials. The dual-blade cutting system enhances its performance, ensuring that even tough materials are processed effectively. This model is ideal for slightly larger properties or those with more extensive landscaping.

The 8F model introduces a larger size and enhanced capability, featuring a potent 18-amp motor that can tackle branches up to 3 inches in diameter. The 8F is designed for heavy-duty use, making it suitable for both residential and commercial applications. Its improved shredding technology allows for finer mulch, improving the quality of the output, which can be beneficial for gardens and landscaping. The machine's sturdy wheels provide excellent mobility, ensuring that transporting it across your property is effortless.

Finally, the 10F model represents the pinnacle of Patriot Products' chipper shredder line. With a powerful 21-amp motor, it can handle branches up to 3 inches thick seamlessly. The 10F features a unique design that minimizes clogging, allowing for continuous operation without interruptions. This model includes advanced safety features, such as an automatic shut-off system, providing peace of mind during operation. Its larger capacity means it can produce an impressive amount of mulch, making it an excellent choice for large properties or landscaping projects.

In conclusion, the 5F, 6F, 8F, and 10F models from Patriot Products offer a range of features and technologies tailored to meet various yard maintenance needs. With their emphasis on performance, efficiency, and safety, these chipper shredders are invaluable assets for effective yard management. Whether tackling simple yard clean-ups or more extensive landscaping tasks, any of these models deliver dependable results that are sure to impress.