Patriot Products 5F, 6F, 8F, 10F manual Maintain These Safety Devices

Page 14

THE VACUUM (OPTIONAL) WORKS BEST WHEN YOU LET THE NOZZLE HOVER OVER THE WASTE.

SET SCREW

LOCK COLLAR

page 14

3

Loosen the lock collar by unscrewing and removing the set screw with an 1/8” Allen wrench. Insert a pin punch and tap at an angle with a ball peen hammer, turning the collar clockwise until you can remove it. (Before reassembling the collar, use sand paper to smooth the burr where the set screw enters the hub. Be sure the collar mounts flush with the out- side of the rotor bearing shaft.)

4

Remove the flange nuts from around the perimeter of the fan housing. Next, loosen but do not remove the three flange nuts holding the triangu- lar flangettes over the bearing. Pull apart the housings, then take off the flangettes and remove the entire fan housing. Position it underneath the unit, as seen in the next drawing...

▲CAUTION: FOR YOUR SAFETY ! AND TO MEET NATIONAL SAFETY STANDARDS, THE DISCHARGE DEFLECTOR AND HOPPER GUARD MUST BE MAINTAINED IN GOOD CON- DITION. SERIOUS PERSONAL INJURY MAY OCCUR IF THE SHIELD OR DEFLECTOR ARE NOT INTACT. IT IS THE OPERATOR’S RESPONSIBILITY TO

MAINTAIN THESE SAFETY DEVICES.

▲CAUTION: THE ROTOR WILL COAST ! EVEN AFTER THE ENGINE IS OFF. MAKE

SURE THIS ASSEMBLY IS FULLY STOPPED AND DISCONNECT THE SPARK PLUG WIRE BEFORE ANY MAINTENANCE OR SERVICE IS PER- FORMED. IF THE ROTOR IS STILL TURNING, IT MAY CAUSE SERIOUS PERSONAL INJURY.

5

Note how the fan housing has been placed underneath. Put a rag there, too, to avoid scratching the housing. Use a 9/16” wrench to remove the 3/8” bolt from the center of the rotor shaft. (When reassembling, use a torque wrench to tighten this bolt to 45 ft.-lbs.)

6

Pull the rotor from the crankshaft by turning the rotor back and forth. There may be some resistance. Pull it off steadily, making sure that the hammers clear the inner wall of the center plate. (When reassembling, coat the exposed engine shaft and key with a liquid graphite or slip plate type compound.)

Page 13 Page 15
Image 14
Page 13 Page 15
Contents N U a L Contents Triangles Your Safety OperatingThese Property DamageHow Long Will It Take? What About Engine or Starting Problems?How Do I File a Claim? What About Professional or Commercial Use?Hopper Spark Plug Wire ThrottleShredder Discharge ChuteFire and Burn Hazards Safety & MaintenanceOther Maintenance Carbon Monoxide Hazards❶ Safety ❷ Assembly Fire and Emissions ! Warnings Don’t Have a SeizureEngine Controls 15-ft. Vac Kit Assembly Optional FirstChipping ❸ OperationSafe Operating Conditions ShreddingDirect-Bagging ❹ HOW IT WorksVacuuming ❺ Maintenance Maintain These Safety Devices Correct Staggering of HAM Mers Composting Bitten by the Bug?Landscape & Garden How Long Until Soup’s On?❼ Illustrated Parts List Engine MOUNT/AXLE, 10 HPRear View Even After the EngineFront View TURNING,IT MAY Cause Serious Personal InjuryMAY Rotor Will Coast Even AfterMake ❽ TROUBLE-SHOOTER Damage and Serious Personal Injury

5F, 6F, 8F, 10F specifications

Patriot Products is renowned for its innovative line of chipper shredders, with models such as the 5F, 6F, 8F, and 10F standing out for their performance and reliability in yard maintenance. These machines are designed to efficiently reduce yard waste into mulch, making them an essential tool for homeowners and landscapers alike.

The Patriot Products 5F model features a robust 14-amp electric motor, allowing it to handle branches up to 2 inches in diameter with ease. Its compact design makes it perfect for small to medium-sized yards, delivering a powerful performance without the need for gas or oil. The 5F is equipped with a patented cutting system that ensures a clean, quick cut, reducing the strain on the motor and extending its lifespan. Additionally, it can produce up to 20 bags of mulch from one load, making it highly efficient for yard clean-up tasks.

Moving on to the 6F model, it presents a step up in capacity and power. With a 15-amp electric motor, the machine can shred branches up to 2.5 inches thick. One of the main features of the 6F is its unique feed chute design, which allows for easy and safe feeding of materials. The dual-blade cutting system enhances its performance, ensuring that even tough materials are processed effectively. This model is ideal for slightly larger properties or those with more extensive landscaping.

The 8F model introduces a larger size and enhanced capability, featuring a potent 18-amp motor that can tackle branches up to 3 inches in diameter. The 8F is designed for heavy-duty use, making it suitable for both residential and commercial applications. Its improved shredding technology allows for finer mulch, improving the quality of the output, which can be beneficial for gardens and landscaping. The machine's sturdy wheels provide excellent mobility, ensuring that transporting it across your property is effortless.

Finally, the 10F model represents the pinnacle of Patriot Products' chipper shredder line. With a powerful 21-amp motor, it can handle branches up to 3 inches thick seamlessly. The 10F features a unique design that minimizes clogging, allowing for continuous operation without interruptions. This model includes advanced safety features, such as an automatic shut-off system, providing peace of mind during operation. Its larger capacity means it can produce an impressive amount of mulch, making it an excellent choice for large properties or landscaping projects.

In conclusion, the 5F, 6F, 8F, and 10F models from Patriot Products offer a range of features and technologies tailored to meet various yard maintenance needs. With their emphasis on performance, efficiency, and safety, these chipper shredders are invaluable assets for effective yard management. Whether tackling simple yard clean-ups or more extensive landscaping tasks, any of these models deliver dependable results that are sure to impress.
Top Page Image Contents