Patriot Products 5F, 6F, 8F, 10F manual ❺ Maintenance

Page 13

page 13

Fixing Clogs, Stalls & Jams

Stalls, jams, and plug-ups most often occur when the machine is overloaded. When vacuuming, walk slowly over heavy leaf coverage. When chipping, insert and retract thick branches so that the rotor maintains a constant speed. Do not put prunings down the shredder that exceed the diameter or length capacities of the model you own (see page 11).

If the chipper-shredder-vac clogs and stops, try the following:

1.Set throttle to STOP. Pull off the spark plug wire.

2.Check fuel supply. Did it run out of gas?

3.Put on some gloves to avoid sharp edges when digging out the inlets.

4.Remove collection bag, clean out discharge inlet.

4.Clear out chipper cone and shredder hopper.

5.Gently pull the starter cord. If the rotor inside is turning freely, re-attach the spark plug wire, bag, and re-start the engine.

6.If the jam is more serious, remove the chipper cone. Then, use a heavy stick or probe to insert into discharge inlet, and push back against the fan blades on the rotor. This will force clogged debris out the front oval opening and the discharge inlet. Repeat until clear.

Ready to Go?

❏Check oil and gas levels, attach spark plug wire.

❏Attach bagger-blower chute, T-bolts, hook bag on handle, close zipper.

❏Remove any objects from chipper cone.

❺MAINTENANCE

Servicing the Hammers &

Sharpening the Knives

1

Shut off the engine, let the rotor stop, disconnect the spark plug wire.

Remove the chipping cone assembly at its base with a 1/2” wrench.

(To service the knives, go directly to Step 8 on page 15.)

2

Disassemble the discharge deflector and the bag retaining bolt underneath the discharge chute using two 1/2” wrenches.

▲WARNING: THE POWER MUST BE ! OFF, THE ROTOR FULLY STOPPED AND THE SPARK PLUG WIRE DISCONNECTED FROM THE SPARK PLUG BEFORE ANY SERVICE OR MAIN- TENANCE IS PERFORMED. OTHER- WISE, PERSONAL INJURY MAY

RESULT!

Batten Down the Hardware

All the serrated fasteners, roll pins and lockwashers have special locking qualities when they’re new. Whenever removing one for any rea- son, use a new one in its place. Inspect and tighten loose fasteners before each use.

Deflector Shields,

Hopper Guards & You

The deflector shield covering the dis- charge chute and the flexible hopper guard inside the shredder hopper are designed to last a long, long time.

However, should either the guard or the deflector somehow become dam- aged, you must shut down the unit and fix or replace them before contin- uing any further.

▲CAUTION: TURN OFF THE ENGINE, ! WAIT FOR THE ROTOR TO STOP TURNING AND DISCONNECT THE SPARK PLUG WIRE BEFORE ATTEMPT- ING TO SERVICE THE HAMMERS OR KNIVES. FAILURE TO SHUT DOWN PROPERLY CONSTITUTES NEGLIGENT BEHAVIOR AND MAY RESULT IN PER-

SONAL INJURY.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents N U a L Contents These Your Safety OperatingTriangles Property DamageHow Do I File a Claim? What About Engine or Starting Problems?How Long Will It Take? What About Professional or Commercial Use?Shredder Spark Plug Wire ThrottleHopper Discharge ChuteOther Maintenance Safety & MaintenanceFire and Burn Hazards Carbon Monoxide Hazards❶ Safety ❷ Assembly Engine Controls Don’t Have a SeizureFire and Emissions ! Warnings First 15-ft. Vac Kit Assembly OptionalSafe Operating Conditions ❸ OperationChipping ShreddingVacuuming ❹ HOW IT WorksDirect-Bagging ❺ Maintenance Maintain These Safety Devices Correct Staggering of HAM Mers Landscape & Garden Bitten by the Bug?Composting How Long Until Soup’s On?Engine MOUNT/AXLE, 10 HP ❼ Illustrated Parts ListEven After the Engine Rear ViewTURNING,IT MAY Cause Serious Personal Injury Front ViewMake Rotor Will Coast Even AfterMAY Damage and Serious Personal Injury ❽ TROUBLE-SHOOTER

5F, 6F, 8F, 10F specifications

Patriot Products is renowned for its innovative line of chipper shredders, with models such as the 5F, 6F, 8F, and 10F standing out for their performance and reliability in yard maintenance. These machines are designed to efficiently reduce yard waste into mulch, making them an essential tool for homeowners and landscapers alike.

The Patriot Products 5F model features a robust 14-amp electric motor, allowing it to handle branches up to 2 inches in diameter with ease. Its compact design makes it perfect for small to medium-sized yards, delivering a powerful performance without the need for gas or oil. The 5F is equipped with a patented cutting system that ensures a clean, quick cut, reducing the strain on the motor and extending its lifespan. Additionally, it can produce up to 20 bags of mulch from one load, making it highly efficient for yard clean-up tasks.

Moving on to the 6F model, it presents a step up in capacity and power. With a 15-amp electric motor, the machine can shred branches up to 2.5 inches thick. One of the main features of the 6F is its unique feed chute design, which allows for easy and safe feeding of materials. The dual-blade cutting system enhances its performance, ensuring that even tough materials are processed effectively. This model is ideal for slightly larger properties or those with more extensive landscaping.

The 8F model introduces a larger size and enhanced capability, featuring a potent 18-amp motor that can tackle branches up to 3 inches in diameter. The 8F is designed for heavy-duty use, making it suitable for both residential and commercial applications. Its improved shredding technology allows for finer mulch, improving the quality of the output, which can be beneficial for gardens and landscaping. The machine's sturdy wheels provide excellent mobility, ensuring that transporting it across your property is effortless.

Finally, the 10F model represents the pinnacle of Patriot Products' chipper shredder line. With a powerful 21-amp motor, it can handle branches up to 3 inches thick seamlessly. The 10F features a unique design that minimizes clogging, allowing for continuous operation without interruptions. This model includes advanced safety features, such as an automatic shut-off system, providing peace of mind during operation. Its larger capacity means it can produce an impressive amount of mulch, making it an excellent choice for large properties or landscaping projects.

In conclusion, the 5F, 6F, 8F, and 10F models from Patriot Products offer a range of features and technologies tailored to meet various yard maintenance needs. With their emphasis on performance, efficiency, and safety, these chipper shredders are invaluable assets for effective yard management. Whether tackling simple yard clean-ups or more extensive landscaping tasks, any of these models deliver dependable results that are sure to impress.
Top Page Image Contents