Porter-Cable 7310 Edge Guide KIT, Adjusting Depth of CUT, Adjusting SUB-BASE Alignment

Page 12

ADJUSTING DEPTH OF CUT

DISCONNECT TOOL FROM POWER SOURCE.

1.Loosen base locking screw (Fig. 3) approximately one-quarter turn.

2.Turn depth adjusting wheel (Fig. 3) clockwise, looking at top of wheel, to raise cutter reducing depth of cut or counterclockwise to lower cutter for increasing depth of cut.

3.Tighten base locking screw securely and make a test cut in scrap material and check depth of cut.

4.Repeat steps 1 through 3 until desired depth of cut is achieved.

LOCKING

SCREW SPRING WASHER

DEPTH ADJUSTING

WHEEL

Fig. 3

ADJUSTING SUB-BASE ALIGNMENT

Applications using a templet guide require the bit to be centered within the guide. This, in turn, requires the center hole in the sub-base to be in line with the collet of the motor unit. Your model has an adjustable sub-base which has been aligned at the factory. If the sub-base has been removed and/or readjustment is required, proceed as follows:

DISCONNECT TOOL FROM POWER SOURCE.

1.Install 42054 Templet Guide (available as an accessory) to the subbase and tighten securely.

2.Loosen sub-base mounting screws just enough to allow sub-base to move on base.

3.Install a straight 1/4" diameter bit in collet of motor unit and tighten securely.

4.Assemble motor unit to base, align hole in templet guide with 1/4" diameter bit and adjust depth of cut so that bit extends through templet guide. Tighten motor unit in base.

5.Tighten sub-base mounting screws securely.

73100 EDGE GUIDE KIT

Model 73100 Edge Guide Kit, consisting of parts listed below, is available as an accessory for use with laminate trimming bits without pilots (like the 44858PC or the pilotless bit with a 3/8" length flute) on Model 7310 Trimmer.

ABase and Roller Guide - for use with 44858PC bit.

BEdge Guide - for flush trimming with the pilotless bit with a 3/8" length flute.

CEdge Guide - for bevel trimming with the pilotless bit with a 3/8" length flute.

DStraight Edge Guide - for straight trimming with 44858PC & the pilotless bit with a 3/8" length flute.

EGuide Setting Gauge

FMounting Screws

GWrench

DISCONNECT TOOL FROM POWER SOURCE.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Double Insulated Table of Contents Important Safety InstructionsSafety Guidelines Definitions California PropositionGeneral Safety Rules General Safety Rules Additional Specific Safety Rules Clear the Trimmer BIT Area before starting motorPage Symbol Definition Motor Extension Cord SelectionCarton Contents Functional DescriptionOperation Model 7310 Trimmer Assembly To Install BITTo Remove BIT Adjusting Depth of CUT Adjusting SUB-BASE AlignmentEdge Guide KIT Assembling and Adjusting Base and Guide Flush Trimming with Pilotless BIT with 3/8 Length FluteModel 7319 Tilt Base Trimmer Assembly Using Straight Edge GuideModel 7312 Offset Trimmer Assembly Adjusting TiltAssembling Offset Base to Motor To Install & Remove BIT Tighten Collet NUT AT this TimeOperation Underscribe 7320 Trimmer Assembly Typical ApplicationsAdjusting BIT Exposure Adjusting Guide PlateUsing Underscribe Trimmer Troubleshooting Guide Maintenance Keep Tool CleanFailure to Start LubricationService AccessoriesReplacement Parts Service and RepairsWarranty PORTER-CABLE Limited ONE Year WarrantyCanadian PORTER-CABLE Delta Service Centers
Related manuals
Manual 23 pages 19.86 Kb

7310 specifications

The Porter-Cable 7310 is a highly versatile and reliable product in the realm of power tools, particularly known for its efficient and reliable design. As a rotary sander, it stands out in both professional and DIY circles, offering a blend of power, convenience, and user-friendly features which make it a staple in woodworking, furniture refinishing, and other sanding applications.

One of the main features of the Porter-Cable 7310 is its powerful motor, which delivers a significant amount of orbital action—up to 22,000 OPM (orbits per minute). This capability ensures that users can achieve a smooth finish in a variety of materials, from wood to plastics, without the risk of damaging the surface. The motor’s power combined with the random orbit design minimizes swirl marks while enhancing the overall finish quality, making it ideal for detailed work.

The design of the Porter-Cable 7310 is another highlight. It incorporates an ergonomic grip that reduces user fatigue during extended periods of use. The lightweight yet sturdy construction allows for easy maneuverability, enabling users to sand both flat and contoured surfaces with ease. Additionally, the integrated dust bag is a feature that aligns with modern workshop practices, helping to keep the work area clean and minimizing health risks associated with airborne dust particles.

Another technological innovation in the Porter-Cable 7310 is its hook-and-loop sanding pad attachment system. This design simplifies the process of changing sanding discs, saving valuable time during projects. The orbital sander is compatible with a wide range of sanding discs, including options with varying grits, making it adaptable to different tasks, from heavy stock removal to ultra-fine finishing.

Moreover, the Porter-Cable 7310 is built with durability in mind. Its robust construction is meant to withstand the rigors of daily use in both commercial and home environments. Users have praised its ability to operate quietly, contributing to a more pleasant working atmosphere.

In conclusion, the Porter-Cable 7310 is a powerful and efficient rotary sander, combining exceptional performance features with ease of use. Its lightweight design, effective dust collection system, and user-friendly sanding disc attachment make it a preferred choice for both professionals and hobbyists alike. Whether tackling large projects or intricate detailing, the Porter-Cable 7310 delivers consistent results, proving itself as an indispensable tool for sanding tasks.
Top Page Image Contents