Porter-Cable 7310 instruction manual Assembling and Adjusting Base and Guide

Page 13

A B C D E F G

Fig. 4

ASSEMBLING AND ADJUSTING BASE AND GUIDE

1.The base and roller guide (A) Fig. 4, are assembled at the factory. To assemble to trimmer: Remove one sub-base mounting screw (A) Fig. 5, insert alignment pin in guide base into hole in bottom of trimmer sub-base and fasten with two mounting screws (F) Fig. 4, as shown in Fig. 5A. Do not tighten at this time.

2.Install 44858PC bit to trimmer as outlined under TO INSTALL BIT.

3.Align roller guide with bit by loosening locking screw (Fig. 5A) and turning adjusting screw, with wrench provided, until guide is in desired location.

NOTE: Guide mounting holes are oversized allowing guide to be rotated on alignment pin to align guide roller with bit.

4.Tighten all screws and make a trial cut on scrap material to check alignment. Readjust if necessary.

5.For making flush cuts align roller guide with straight portion of bit.

6.For bevel cuts adjust cutting depth so that only the bevel portion of bit projects through trimmer base and adjust roller guide to produce desired amount of bevel.

A

LOCKING SCREW

ADJUSTING SCREW

MOUNTING

SCREW

Fig. 5

Fig. 5A

FLUSH TRIMMING WITH PILOTLESS BIT WITH 3/8" LENGTH FLUTE

1.Attach base and guide to trimmer as outlined under ASSEMBLING AND ADJUSTING BASE AND GUIDE.

2.Remove roller guide and replace with flush trimming guide (B) (Fig. 4). This guide may be identified by the molded on letter “F”. Stud on end of guide must face towards trimmer base.

3.Install guide setting gauge (E) (Fig. 4) to trimmer so that hole in end of gauge may be positioned over stud in guide.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Double Insulated Important Safety Instructions Table of ContentsCalifornia Proposition Safety Guidelines DefinitionsGeneral Safety Rules General Safety Rules Clear the Trimmer BIT Area before starting motor Additional Specific Safety RulesPage Symbol Definition Extension Cord Selection MotorFunctional Description Carton ContentsOperation To Install BIT Model 7310 Trimmer AssemblyTo Remove BIT Adjusting SUB-BASE Alignment Adjusting Depth of CUTEdge Guide KIT Flush Trimming with Pilotless BIT with 3/8 Length Flute Assembling and Adjusting Base and GuideUsing Straight Edge Guide Model 7319 Tilt Base Trimmer AssemblyAdjusting Tilt Model 7312 Offset Trimmer AssemblyAssembling Offset Base to Motor Tighten Collet NUT AT this Time To Install & Remove BITOperation Typical Applications Underscribe 7320 Trimmer AssemblyAdjusting Guide Plate Adjusting BIT ExposureUsing Underscribe Trimmer Troubleshooting Guide Keep Tool Clean MaintenanceFailure to Start LubricationAccessories ServiceReplacement Parts Service and RepairsPORTER-CABLE Limited ONE Year Warranty WarrantyCanadian PORTER-CABLE Delta Service Centers
Related manuals
Manual 23 pages 19.86 Kb

7310 specifications

The Porter-Cable 7310 is a highly versatile and reliable product in the realm of power tools, particularly known for its efficient and reliable design. As a rotary sander, it stands out in both professional and DIY circles, offering a blend of power, convenience, and user-friendly features which make it a staple in woodworking, furniture refinishing, and other sanding applications.

One of the main features of the Porter-Cable 7310 is its powerful motor, which delivers a significant amount of orbital action—up to 22,000 OPM (orbits per minute). This capability ensures that users can achieve a smooth finish in a variety of materials, from wood to plastics, without the risk of damaging the surface. The motor’s power combined with the random orbit design minimizes swirl marks while enhancing the overall finish quality, making it ideal for detailed work.

The design of the Porter-Cable 7310 is another highlight. It incorporates an ergonomic grip that reduces user fatigue during extended periods of use. The lightweight yet sturdy construction allows for easy maneuverability, enabling users to sand both flat and contoured surfaces with ease. Additionally, the integrated dust bag is a feature that aligns with modern workshop practices, helping to keep the work area clean and minimizing health risks associated with airborne dust particles.

Another technological innovation in the Porter-Cable 7310 is its hook-and-loop sanding pad attachment system. This design simplifies the process of changing sanding discs, saving valuable time during projects. The orbital sander is compatible with a wide range of sanding discs, including options with varying grits, making it adaptable to different tasks, from heavy stock removal to ultra-fine finishing.

Moreover, the Porter-Cable 7310 is built with durability in mind. Its robust construction is meant to withstand the rigors of daily use in both commercial and home environments. Users have praised its ability to operate quietly, contributing to a more pleasant working atmosphere.

In conclusion, the Porter-Cable 7310 is a powerful and efficient rotary sander, combining exceptional performance features with ease of use. Its lightweight design, effective dust collection system, and user-friendly sanding disc attachment make it a preferred choice for both professionals and hobbyists alike. Whether tackling large projects or intricate detailing, the Porter-Cable 7310 delivers consistent results, proving itself as an indispensable tool for sanding tasks.
Top Page Image Contents