Porter-Cable 7310 instruction manual To Install & Remove BIT, Tighten Collet NUT AT this Time

Page 16

7. Clean collet nut and collet, and assemble

D

to the spindle in the offset base. DO NOT

TIGHTEN COLLET NUT AT THIS TIME.

 

Tightening the collet nut without a bit installed

 

in the collet is likely to damage the collet.

 

8.Position sub-base to base housing and secure with the three screws that were removed in step 3.

TO INSTALL & REMOVE BIT

 

 

 

DISCONNECT TOOL FROM

 

 

 

 

 

 

 

 

POWER SOURCE.

C

 

 

 

 

 

 

1. Insert long portion of hex wrench

B

(furnished) through spindle lock hole (see Fig.

10) so that wrench protrudes from both sides

A

of base housing. It may be necessary to rotate

spindle by hand to align hole in spindle with

 

holes in housing.

Fig. 9

 

 

 

 

2.Clean and insert bit shank into collet. Tighten collet nut securely with collet wrench.

NEVER TIGHTEN OR LOOSEN COLLET NUT WITH SPINDLE LOCK ENGAGED IN MOTOR SHAFT. TO

DO SO MAY DAMAGE DRIVE BELT.

HEX

3. To remove bit, reverse above

WRENCH

procedure. If bit does not remove

 

easily, tap the bit shank with wrench

 

to release bit.

 

NEVER TIGHTEN COLLET

 

WITHOUT BIT INSERTED, TO DO

 

SO MAY CAUSE DAMAGE TO

Fig. 10

COLLET.

 

ADJUSTING DEPTH OF CUT

DISCONNECT TOOL FROM POWER SOURCE.

1.Loosen bit in collet (See TO INSTALL & REMOVE BIT).

2.Position hex wrench (furnished) to depth adjusting screw (See Fig.11).

3.Hold spindle with fingers and apply light upward pressure on bit (to maintain contact between bit shank and adjusting screw) while turning hex wrench to adjust bit exposure.

Turn screw counter-clockwise to increase exposure; turn screw

clockwise to decrease exposure.

HEX

4. When using long shank bits:

WRENCH

 

 

 

The distance from the bottom of

 

 

 

the sub-base to the collet may be

 

 

 

increased (approximately 3/16") by

 

 

 

turning the sub-base over (See

 

 

 

Fig.12):

SPINDLE

 

 

A. Remove three sub-base

 

 

 

 

 

mounting screws.

 

 

 

B. Turn sub-base over and

 

 

 

re-attach using screws

 

 

Fig. 11

removed in step A.

 

 

 

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Double Insulated Table of Contents Important Safety InstructionsSafety Guidelines Definitions California PropositionGeneral Safety Rules General Safety Rules Additional Specific Safety Rules Clear the Trimmer BIT Area before starting motorPage Symbol Definition Motor Extension Cord SelectionFunctional Description Carton ContentsOperation To Install BIT Model 7310 Trimmer AssemblyTo Remove BIT Adjusting SUB-BASE Alignment Adjusting Depth of CUTEdge Guide KIT Assembling and Adjusting Base and Guide Flush Trimming with Pilotless BIT with 3/8 Length FluteModel 7319 Tilt Base Trimmer Assembly Using Straight Edge GuideAdjusting Tilt Model 7312 Offset Trimmer AssemblyAssembling Offset Base to Motor To Install & Remove BIT Tighten Collet NUT AT this TimeOperation Underscribe 7320 Trimmer Assembly Typical ApplicationsAdjusting BIT Exposure Adjusting Guide PlateUsing Underscribe Trimmer Troubleshooting Guide Maintenance Keep Tool CleanFailure to Start LubricationService AccessoriesReplacement Parts Service and RepairsWarranty PORTER-CABLE Limited ONE Year WarrantyCanadian PORTER-CABLE Delta Service Centers
Related manuals
Manual 23 pages 19.86 Kb

7310 specifications

The Porter-Cable 7310 is a highly versatile and reliable product in the realm of power tools, particularly known for its efficient and reliable design. As a rotary sander, it stands out in both professional and DIY circles, offering a blend of power, convenience, and user-friendly features which make it a staple in woodworking, furniture refinishing, and other sanding applications.

One of the main features of the Porter-Cable 7310 is its powerful motor, which delivers a significant amount of orbital action—up to 22,000 OPM (orbits per minute). This capability ensures that users can achieve a smooth finish in a variety of materials, from wood to plastics, without the risk of damaging the surface. The motor’s power combined with the random orbit design minimizes swirl marks while enhancing the overall finish quality, making it ideal for detailed work.

The design of the Porter-Cable 7310 is another highlight. It incorporates an ergonomic grip that reduces user fatigue during extended periods of use. The lightweight yet sturdy construction allows for easy maneuverability, enabling users to sand both flat and contoured surfaces with ease. Additionally, the integrated dust bag is a feature that aligns with modern workshop practices, helping to keep the work area clean and minimizing health risks associated with airborne dust particles.

Another technological innovation in the Porter-Cable 7310 is its hook-and-loop sanding pad attachment system. This design simplifies the process of changing sanding discs, saving valuable time during projects. The orbital sander is compatible with a wide range of sanding discs, including options with varying grits, making it adaptable to different tasks, from heavy stock removal to ultra-fine finishing.

Moreover, the Porter-Cable 7310 is built with durability in mind. Its robust construction is meant to withstand the rigors of daily use in both commercial and home environments. Users have praised its ability to operate quietly, contributing to a more pleasant working atmosphere.

In conclusion, the Porter-Cable 7310 is a powerful and efficient rotary sander, combining exceptional performance features with ease of use. Its lightweight design, effective dust collection system, and user-friendly sanding disc attachment make it a preferred choice for both professionals and hobbyists alike. Whether tackling large projects or intricate detailing, the Porter-Cable 7310 delivers consistent results, proving itself as an indispensable tool for sanding tasks.
Top Page Image Contents