Porter-Cable 7310 Model 7319 Tilt Base Trimmer Assembly, Using Straight Edge Guide

Page 14

4.Adjust guide until hole in gauge fits over stud on end of gauge. Tighten all screws securely.

5.Remove guide setting gauge from trimmer and install the bit as outlined under TO INSTALL BIT.

NOTE: It will be necessary to separate motor from base to remove setting gauge and install bit.

6.Adjust depth of cut so that the straight portion of bit extends below trimmer base at least equal to the thickness of material to be trimmed.

7.Make a trial cut on scrap material to check alignment. Readjust if necessary.

BEVEL TRIMMING WITH PILOTLESS BIT WITH 3/8" LENGTH FLUTE

1.Follow steps 1 thru 5 under the previous section, except install bevel trimming guide (C) (Fig.4). This guide may be identified by the Letter “B” molded on.

2.Adjust depth of cut so that only the bevel portion of the bit extends below trimmer base at least equal to the thickness of material to be trimmed.

3.Make a trial cut on scrap material to check alignment. Readjust if necessary.

USING STRAIGHT EDGE GUIDE

The Straight Edge Guide (D) (Fig. 4) may be used with either 44858PC or a pilotless bit with 3/8" length flute for trimming long straight edges.

Assemble to guide base and adjust similar to other guides.

MODEL 7319 TILT BASE TRIMMER ASSEMBLY

Model 7319 Tilt Base Trimmer is completely assembled at the factory. The base is assembled or removed from Model 7301 motor with base locking screw (A) Fig. 6.

NOTE: There is a flat washer (B) Fig. 6, on the locking screw.

Model 7319 Tilt Base is designed for use with 43216PC flush trim bit for trimming into corners. It may also be used with other “self pilot” trim bits for conventional trimming at 90° setting.

ADJUSTING DEPTH OF CUT

DISCONNECT TOOL FROM POWER SOURCE.

C D

A B

Fig. 6

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Double Insulated Table of Contents Important Safety InstructionsSafety Guidelines Definitions California PropositionGeneral Safety Rules General Safety Rules Additional Specific Safety Rules Clear the Trimmer BIT Area before starting motorPage Symbol Definition Motor Extension Cord SelectionOperation Carton ContentsFunctional Description To Remove BIT Model 7310 Trimmer AssemblyTo Install BIT Edge Guide KIT Adjusting Depth of CUTAdjusting SUB-BASE Alignment Assembling and Adjusting Base and Guide Flush Trimming with Pilotless BIT with 3/8 Length FluteModel 7319 Tilt Base Trimmer Assembly Using Straight Edge GuideAssembling Offset Base to Motor Model 7312 Offset Trimmer AssemblyAdjusting Tilt To Install & Remove BIT Tighten Collet NUT AT this TimeOperation Underscribe 7320 Trimmer Assembly Typical ApplicationsAdjusting BIT Exposure Adjusting Guide PlateUsing Underscribe Trimmer Troubleshooting Guide Failure to Start MaintenanceKeep Tool Clean LubricationReplacement Parts ServiceAccessories Service and RepairsWarranty PORTER-CABLE Limited ONE Year WarrantyCanadian PORTER-CABLE Delta Service Centers
Related manuals
Manual 23 pages 19.86 Kb

7310 specifications

The Porter-Cable 7310 is a highly versatile and reliable product in the realm of power tools, particularly known for its efficient and reliable design. As a rotary sander, it stands out in both professional and DIY circles, offering a blend of power, convenience, and user-friendly features which make it a staple in woodworking, furniture refinishing, and other sanding applications.

One of the main features of the Porter-Cable 7310 is its powerful motor, which delivers a significant amount of orbital action—up to 22,000 OPM (orbits per minute). This capability ensures that users can achieve a smooth finish in a variety of materials, from wood to plastics, without the risk of damaging the surface. The motor’s power combined with the random orbit design minimizes swirl marks while enhancing the overall finish quality, making it ideal for detailed work.

The design of the Porter-Cable 7310 is another highlight. It incorporates an ergonomic grip that reduces user fatigue during extended periods of use. The lightweight yet sturdy construction allows for easy maneuverability, enabling users to sand both flat and contoured surfaces with ease. Additionally, the integrated dust bag is a feature that aligns with modern workshop practices, helping to keep the work area clean and minimizing health risks associated with airborne dust particles.

Another technological innovation in the Porter-Cable 7310 is its hook-and-loop sanding pad attachment system. This design simplifies the process of changing sanding discs, saving valuable time during projects. The orbital sander is compatible with a wide range of sanding discs, including options with varying grits, making it adaptable to different tasks, from heavy stock removal to ultra-fine finishing.

Moreover, the Porter-Cable 7310 is built with durability in mind. Its robust construction is meant to withstand the rigors of daily use in both commercial and home environments. Users have praised its ability to operate quietly, contributing to a more pleasant working atmosphere.

In conclusion, the Porter-Cable 7310 is a powerful and efficient rotary sander, combining exceptional performance features with ease of use. Its lightweight design, effective dust collection system, and user-friendly sanding disc attachment make it a preferred choice for both professionals and hobbyists alike. Whether tackling large projects or intricate detailing, the Porter-Cable 7310 delivers consistent results, proving itself as an indispensable tool for sanding tasks.
Top Page Image Contents