Porter-Cable PC2525SP, D25115-0112-0 instruction manual Oil leaking at, Pump

Page 20

PROBLEM			CAUSE			CORRECTION

No or low	1.		Worn seal or packing.		1.	Have replaced by AWSC.
pressure (after	2.		Worn or obstructed		2.	Have replaced by AWSC.
period of nor-			valves.
mal use.)	3.		Worn unloader piston.		3.	Have replaced by AWSC.
	3.		Worn unloader piston.		3.	Have replaced by AWSC.

Water leaking	1.		Worn or broken o-ring.		1.	Check and replace.
at gun/wand
connection	2.		Loose hose connection.		2.	Tighten.
	2.		Loose hose connection.		2.	Tighten.

Water leaking	1.		Loose connections.		1.	Tighten.
at pump	2.		Piston packings worn.		2.	Have replaced by AWSC.
	2.		Piston packings worn.		2.	Have replaced by AWSC.
	3.		Worn or broken o-rings.		3.	Have replaced by AWSC.
	4.		Pump head or tubes dam-		4.	Have replaced by AWSC.
			aged from freezing.

Oil leaking at					2.	Have replaced by AWSC
Oil leaking at		1.	Oil seals worn.		2.	Have replaced by AWSC
pump
pump

D25115

20- ENG

Image 20

Contents Horsepower 2500 PSI GPM Pressure Washer To 600 p.m. C.S.T Maintenance InstructionsGeneral Information Safety Guidelines Definitions Important Safety InstructionsHazard Risk of Explosion or FireRisk of Explosion or Fire Risk to BreathingRisk of Unsafe Operation Risk of Electrical ShockRisk to Fluid Injection Risk of Chemical BurnRisk of HOT Surfaces Arrival at your destinationBOX Contents Assembly Operation Pressure WasherEngine Pressure Washer TerminologyTo Adjust Pressure To USE WandENG Before Starting To Siphon CHEMICALS/CLEANING SolventsTo Shut Down Filter Screen Maintenance Pump WandStorage Peratures are ExpectedTroubleshooting Guide Problem Cause CorrectionIs a steady stream Oil leaking at PumpENG Limited Warranty Responsibility of Original Purchaser initial User