Porter-Cable D25115-0112-0, PC2525SP instruction manual Assembly

Page 9

ASSEMBLY

1.Place handle assembly onto frame and connect handle to frame.

3.Attach high pressure hose to gun. Tighten securely.

2.Connect wand to gun. Tighten securely.

5.Assemble grommet kit and quick-connect nozzles as described in instructions sup- plied.

6.Add engine oil (supplied) to engine. Refer to engine manual supplied by engine manufacturer

for correct procedure.

NOTE: There will be a slight amount of oil in the engine from factory test- ing.

NOTE: The high pressure pump was filled with oil at the factory. There is no need to add oil at this time, see the Maintenance section of this man- ual for Maintenance information.

9- ENG

D25115

Image 9

Contents Horsepower 2500 PSI GPM Pressure Washer Maintenance Instructions General InformationTo 600 p.m. C.S.T Important Safety Instructions Safety Guidelines DefinitionsHazard Risk of Explosion or FireRisk to Breathing Risk of Explosion or FireRisk of Electrical Shock Risk of Unsafe OperationRisk of Chemical Burn Risk to Fluid InjectionArrival at your destination Risk of HOT SurfacesBOX Contents Assembly Pressure Washer OperationEngine Pressure Washer TerminologyTo USE Wand To Adjust PressureENG To Siphon CHEMICALS/CLEANING Solvents To Shut DownBefore Starting Filter Screen Maintenance Wand PumpPeratures are Expected StorageProblem Cause Correction Troubleshooting GuideIs a steady stream Pump Oil leaking atENG Responsibility of Original Purchaser initial User Limited Warranty