Porter-Cable PC2525SP, D25115-0112-0 Risk to Fluid Injection, Risk of Chemical Burn

Page 6

HAZARD

RISK TO FLUID INJECTION

 

WHAT CAN HAPPEN

 

HOW TO PREVENT IT

 

 

 

 

Your washer operates at fluid pressures

Never place hands in front of nozzle.

 

and velocities high enough to penetrate

Direct spray away from self and others.

 

human and animal flesh, which could

Make sure hose and fittings are tight-

 

result in amputation or other serious

 

ened and in good condition. Never

 

injury. Leaks caused by loose fittings or

 

hold onto the hose or fittings during op-

 

worn or damaged hoses can result in

 

eration.

 

injection injuries. DO NOT TREAT FLUID

Do not allow hose to contact muffler.

 

INJECTION AS A SIMPLE CUT! See a

Never attach or remove wand or hose

 

physician immediately!

 

fittings while system is pressurized.

 

 

Use only hose and high pressure

 

 

 

accessories rated for pressure higher

 

 

 

than your pressure washer's p.s.i.

Relieve system pressure before at-

To relieve system pressure, shut off

 

tempting maintenance or disassembly

 

engine, turn off water supply, and pull

 

of equipment.

 

gun trigger until water stops flowing.

 

 

 

 

HAZARD

RISK OF CHEMICAL BURN

WHAT CAN HAPPEN

 

HOW TO PREVENT IT

 

 

 

• Use of acids, toxic or corrosive chemi-

Do not use acids, gasoline, kerosene, or

cals, poisons, insecticides, or any kind

 

any other flammable materials in this

of flammable solvent with this product

 

product. Use only household deter-

could result in serious injury or death.

 

gents, cleaners and degreasers recom-

 

 

mended for use in pressure washers.

 

Wear protective clothing to protect eyes

 

 

and skin from contact with sprayed

 

 

materials.

 

Do not use chlorine bleach or any other

 

 

corrosive compound.

D25115

6- ENG

Image 6
Contents Horsepower 2500 PSI GPM Pressure Washer Maintenance Instructions General InformationTo 600 p.m. C.S.T Hazard Safety Guidelines DefinitionsImportant Safety Instructions Risk of Explosion or FireRisk of Explosion or Fire Risk to BreathingRisk of Unsafe Operation Risk of Electrical ShockRisk to Fluid Injection Risk of Chemical BurnRisk of HOT Surfaces Arrival at your destinationBOX Contents Assembly Engine OperationPressure Washer Pressure Washer TerminologyTo Adjust Pressure To USE WandENG To Siphon CHEMICALS/CLEANING Solvents To Shut DownBefore Starting Filter Screen Maintenance Pump WandStorage Peratures are ExpectedTroubleshooting Guide Problem Cause CorrectionIs a steady stream Oil leaking at PumpENG Limited Warranty Responsibility of Original Purchaser initial User