Porter-Cable D27927-034-0 HOW to Apply Chemicals and Cleaning Solvents, To Apply chemicals

Page 13

HOW TO APPLY CHEMICALS AND CLEANING SOLVENTS

Applying chemicals or cleaning solvents is a low pressure operation. NOTE: Use only soaps and chemicals designed for pressure washer use. Do not use bleach.

To Apply chemicals:

1.Press chemical hose onto barbed fitting located near high pressure hose connection of pump as shown.

2.Place other end of chemical hose with filter on it into container holding chemical/cleaning solution. NOTE: The chemical/water ratio is 7:1, for every 7 gallons of water pumped 1 gallon of chemical/cleaning solution will be used.

3.Install low pressure (black) nozzle into quick connect fitting of spray wand, see How To Use Spray Wand paragraph in this section.

Barbed

Fitting

4.After use of chemicals, place chemical hose into container of clean water and draw clean water through chemical injection system to rinse system thoroughly. If chemicals remain in the pump it could be damaged. Pumps damaged due to chemicals will not be covered under warranty.

NOTE: Chemicals and soaps will not siphon when spray wand is in the high pressure setting.

READ AND UNDERSTAND ALL WARNINGS BEFORE STARTING UNIT

When using the high pressure setting, DO NOT allow the high pressure spray to come in contact with unprotected skin,

eyes, or with any pets or animals. Serious injury can occur.

Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately!

NEVER fill fuel tank when engine is running or hot. Do not smoke when filling fuel tank.

NEVER fill fuel tank completely. Fill tank to 1/2" below bottom of filler neck to provide space for fuel expansion. Wipe any fuel spillage from engine and equipment before starting engine.

NEVER run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

DO NOT let hoses come in contact with very hot engine muffler during or immediately after use of your pressure washer. Damage to hoses from contact with hot engine surfaces will NOT be covered by warranty.

NEVER pull water supply hose to move pressure washer. This could damage hose and/or pump inlet.

DO NOT use hot water, use cold water only.

NEVER turn water supply off while pressure washer engine is running or damage to pump will result.

DO NOT stop spraying water for more than two minutes at a time. Pump operates in bypass mode when spray gun trigger is not pressed. If pump is left in bypass mode for more than two minutes internal components of the pump can be damaged.

If you do not understand these precautions, please call 1-888-559-8550to speak to a service representative for further instructions.

13- ENG

D27927

Page 12 Page 14
Image 13
Page 12 Page 14
Contents PCK3030SP ManualConsumer Safety Information Safety Guidelines DefinitionsMaintenance Instructions Important Safety InstructionsRisk of Explosion or Fire Risk to BreathingRisk of Chemical Burn Risk to Fluid InjectionRisk of Electrical Shock Risk of Unsafe OperationRisk of HOT Surfaces Risk of Injury from Spray Consumer General and Service InformationCarton Contents Assembly Instructions ENG D27927 Basic Elements of a Pressure Washer Operating InstructionsBasic Elements of Engine ReferencePressure Adjustments Pressure Washer Operating FeaturesPressure Washer Terminology To USE Spray Wand Read and Understand ALL Warnings Before Starting Unit HOW to Apply Chemicals and Cleaning SolventsTo Apply chemicals Starting If applying a chemical or cleaning solution, seeShutting Down Depress trigger on gun to start water flow. NoteHow To Change Pump Oil MaintenanceEngine Pump To Check OilHOW to Clean the Water Inlet Filter Nozzle CleaningStorage Problem Trouble Shooting GuideCausecorrection Chemicals Problem Cause CorrectionLimited Warranty

D27927-034-0, PCK3030SP specifications

The Porter-Cable PCK3030SP is a versatile and powerful tool that stands out in the realm of compact toolsets. Designed for both professional and DIY use, this 30-piece kit includes essential accessories, making it an ideal choice for a wide range of applications. One of the main features of the PCK3030SP is its high-quality construction, which ensures durability and longevity, even under demanding work conditions.

The toolset includes a variety of drill bits, chisels, and other accessories that cater to various tasks, from woodworking to metalworking. The drill bits are designed for superior performance and precision, allowing users to achieve clean and accurate results with ease. Furthermore, the PCK3030SP is compatible with standard drill chucks, ensuring seamless integration with different drill models.

Another significant aspect of the Porter-Cable PCK3030SP is its user-friendly design. The tools are lightweight and easy to handle, reducing fatigue during extended use. This design consideration makes the set ideal for both beginners looking to develop their skills and seasoned professionals seeking reliable performance.

In addition to the PCK3030SP, the D27927-034-0 is also an impressive product within the Porter-Cable lineup. This model features advanced technologies that enhance its efficiency and effectiveness. Constructed with a focus on precision, the D27927-034-0 offers precision cutting, making it suitable for a wide range of materials.

Key features of the D27927-034-0 include its robust motor, which delivers substantial power and performance for demanding tasks. Its ergonomic design ensures ease of use, providing operators with better control and reducing overall strain. Additionally, the model is equipped with safety features, such as overload protection and a quick-release locking mechanism, further enhancing its usability and protecting against potential hazards.

In summary, both the Porter-Cable PCK3030SP and the D27927-034-0 exemplify the brand's commitment to providing high-quality, reliable tools that cater to the diverse needs of users. With advanced technologies, durable construction, and user-centric designs, these tools are valuable additions to any workshop, whether for professional tradespeople or enthusiastic home renovators. Their combination of performance and ease of use positions them as standout choices in the tool market.
Top Page Image Contents