Porter-Cable PCK3030SP Starting, Shutting Down, If applying a chemical or cleaning solution, see

Page 14

STARTING

Prior to starting, refer to your engine manual for proper starting procedures for your engine type.

1.In a well ventilated outdoor area add fresh, high quality, unleaded gasoline with a pump octane rating of 86 or higher. Do not overfill. Wipe up spilled fuel before starting the engine. Refer to Engine Owners Manual for correct procedure.

2.Check engine oil level. See Engine Owners Manual for correct procedure.

NOTE: There will be a slight amount of oil in the engine from factory testing.

3. Verify the filter screen is in water inlet of pump.

Filter Screen

NOTE: Cone side faces out.

 

4.Connect water source to pump inlet.

NOTE: Water source must provide a minimum of 5 gallons per minute at 20 p.s.i.

5.Connect high pressure hose to pump outlet.

6.If applying a chemical or cleaning solution, see

How To Apply Chemicals/Cleaning Solvents in

 

High Pressure Hose

Operation section of this manual.

 

 

7.

Turn water source on. NOTE: Failure to do so could

 

 

 

cause damage to the pump.

 

 

8.

Start engine. See Engine Owners Manual for correct

 

 

 

procedure. NOTE: If the engine does not start after

 

 

 

two pulls, pull the trigger to relieve the pressure.

 

 

 

Water

 

9.

Depress trigger on gun to start water flow. NOTE:

 

Source

 

 

Stand on a stable surface and grip gun/spray wand

 

 

 

 

 

 

 

firmly with both hands. Expect the gun to kick when triggered.

 

 

10.Release trigger to stop water flow.

11.Adjust spray for the task being performed by changing quick connect nozzle. See How To Use Spray Wand instructions in this section.

SHUTTING DOWN

1.After each use, if you have applied chemicals, place chemical hose into container of clean water and draw clean water through chemical injection system to rinse system thoroughly. NOTE: Failure to do so could cause damage to the pump.

2.Turn engine off. See Engine Owner’s Manual. NOTE: NEVER turn the water off with the engine running.

3.Turn water source off.

4.Pull trigger on spray gun to relieve any water pressure in hose or spray gun.

5.See Storage section in this manual for proper storage procedures.

D27927

14- ENG

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Manual PCK3030SPSafety Guidelines Definitions Consumer Safety InformationRisk of Explosion or Fire Important Safety InstructionsMaintenance Instructions Risk to BreathingRisk to Fluid Injection Risk of Chemical BurnRisk of HOT Surfaces Risk of Unsafe OperationRisk of Electrical Shock Consumer General and Service Information Risk of Injury from SprayCarton Contents Assembly Instructions ENG D27927 Basic Elements of Engine Operating InstructionsBasic Elements of a Pressure Washer ReferencePressure Washer Terminology Pressure Washer Operating FeaturesPressure Adjustments To USE Spray Wand To Apply chemicals HOW to Apply Chemicals and Cleaning SolventsRead and Understand ALL Warnings Before Starting Unit Shutting Down If applying a chemical or cleaning solution, seeStarting Depress trigger on gun to start water flow. NoteEngine Pump MaintenanceHow To Change Pump Oil To Check OilNozzle Cleaning HOW to Clean the Water Inlet FilterStorage Causecorrection Trouble Shooting GuideProblem Problem Cause Correction ChemicalsLimited Warranty

D27927-034-0, PCK3030SP specifications

The Porter-Cable PCK3030SP is a versatile and powerful tool that stands out in the realm of compact toolsets. Designed for both professional and DIY use, this 30-piece kit includes essential accessories, making it an ideal choice for a wide range of applications. One of the main features of the PCK3030SP is its high-quality construction, which ensures durability and longevity, even under demanding work conditions.

The toolset includes a variety of drill bits, chisels, and other accessories that cater to various tasks, from woodworking to metalworking. The drill bits are designed for superior performance and precision, allowing users to achieve clean and accurate results with ease. Furthermore, the PCK3030SP is compatible with standard drill chucks, ensuring seamless integration with different drill models.

Another significant aspect of the Porter-Cable PCK3030SP is its user-friendly design. The tools are lightweight and easy to handle, reducing fatigue during extended use. This design consideration makes the set ideal for both beginners looking to develop their skills and seasoned professionals seeking reliable performance.

In addition to the PCK3030SP, the D27927-034-0 is also an impressive product within the Porter-Cable lineup. This model features advanced technologies that enhance its efficiency and effectiveness. Constructed with a focus on precision, the D27927-034-0 offers precision cutting, making it suitable for a wide range of materials.

Key features of the D27927-034-0 include its robust motor, which delivers substantial power and performance for demanding tasks. Its ergonomic design ensures ease of use, providing operators with better control and reducing overall strain. Additionally, the model is equipped with safety features, such as overload protection and a quick-release locking mechanism, further enhancing its usability and protecting against potential hazards.

In summary, both the Porter-Cable PCK3030SP and the D27927-034-0 exemplify the brand's commitment to providing high-quality, reliable tools that cater to the diverse needs of users. With advanced technologies, durable construction, and user-centric designs, these tools are valuable additions to any workshop, whether for professional tradespeople or enthusiastic home renovators. Their combination of performance and ease of use positions them as standout choices in the tool market.
Top Page Image Contents