Porter-Cable PCK3030SP, D27927-034-0 Trouble Shooting Guide, Problem, Causecorrection

Page 18

PROBLEM

TROUBLE SHOOTING GUIDE

CAUSECORRECTION

Engine will not start (see Engine Manual for further engine troubleshooting)

No or low pressure (initial use)

No fuel.

Low oil

Pressure builds up after two pulls on the recoil starter or after initial use.

Choke lever in the “No Choke” position.

Spark plug wire not attached.

Engine ON/OFF switch in OFF position

Choke lever in the “Choke” position on a “hot” engine or an engine that has been exposed to thermal heat for a long period of time.

Fuel valve closed

Spray wand not in high pressure.

Low water supply.

Leak at high pressure hose fitting.

Nozzle obstructed.

Add Fuel.

Add required amount of oil.

Squeeze gun trigger to relieve pressure.

Move choke to the “Choke” position.

Attach spark plug wire.

Place engine ON/OFF switch in on position.

Move choke to the “No Choke” position.

Move the fuel valve lever to the “Open” position.

See How to Use Spray Wand paragraph in the Operation Section.

Water supply must be at least 5 GPM @ 20 PSI.

Repair leak. Apply sealant tape if necessary.

See Nozzle Cleaning paragraph in the Maintenance section for the correct procedure.

Water filter screen clogged.

Remove and clean filter.

 

 

Defective E-Z start valve.

Check with Authorized Warranty

 

Service Center (AWSC.)

 

 

Air in hose.

Turn off the engine, then the

 

water source. Disconnect the

 

water source from the pump inlet

 

and turn the water source on to

 

remove all air from the hose.

 

When there is a steady stream of

 

water present, turn water source

 

off. Re-connect water source to

 

pump inlet and turn on water

 

source. Squeeze trigger to re-

 

move remaining air

Choke lever in the “Choke” position.

Move choke to the “No Choke”

 

position.

Throttle control lever is not in the

Move throttle control lever to the

“Fast” position.

“Fast” position.

High pressure hose is too long.

Use high pressure hose under

 

100 feet.

D27927

18- ENG

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Manual PCK3030SPSafety Guidelines Definitions Consumer Safety InformationRisk of Explosion or Fire Important Safety InstructionsMaintenance Instructions Risk to BreathingRisk to Fluid Injection Risk of Chemical BurnRisk of Unsafe Operation Risk of Electrical ShockRisk of HOT Surfaces Consumer General and Service Information Risk of Injury from SprayCarton Contents Assembly Instructions ENG D27927 Basic Elements of Engine Operating InstructionsBasic Elements of a Pressure Washer ReferencePressure Washer Operating Features Pressure AdjustmentsPressure Washer Terminology To USE Spray Wand HOW to Apply Chemicals and Cleaning Solvents Read and Understand ALL Warnings Before Starting UnitTo Apply chemicals Shutting Down If applying a chemical or cleaning solution, seeStarting Depress trigger on gun to start water flow. NoteEngine Pump MaintenanceHow To Change Pump Oil To Check OilNozzle Cleaning HOW to Clean the Water Inlet FilterStorage Trouble Shooting Guide ProblemCausecorrection Problem Cause Correction ChemicalsLimited Warranty

D27927-034-0, PCK3030SP specifications

The Porter-Cable PCK3030SP is a versatile and powerful tool that stands out in the realm of compact toolsets. Designed for both professional and DIY use, this 30-piece kit includes essential accessories, making it an ideal choice for a wide range of applications. One of the main features of the PCK3030SP is its high-quality construction, which ensures durability and longevity, even under demanding work conditions.

The toolset includes a variety of drill bits, chisels, and other accessories that cater to various tasks, from woodworking to metalworking. The drill bits are designed for superior performance and precision, allowing users to achieve clean and accurate results with ease. Furthermore, the PCK3030SP is compatible with standard drill chucks, ensuring seamless integration with different drill models.

Another significant aspect of the Porter-Cable PCK3030SP is its user-friendly design. The tools are lightweight and easy to handle, reducing fatigue during extended use. This design consideration makes the set ideal for both beginners looking to develop their skills and seasoned professionals seeking reliable performance.

In addition to the PCK3030SP, the D27927-034-0 is also an impressive product within the Porter-Cable lineup. This model features advanced technologies that enhance its efficiency and effectiveness. Constructed with a focus on precision, the D27927-034-0 offers precision cutting, making it suitable for a wide range of materials.

Key features of the D27927-034-0 include its robust motor, which delivers substantial power and performance for demanding tasks. Its ergonomic design ensures ease of use, providing operators with better control and reducing overall strain. Additionally, the model is equipped with safety features, such as overload protection and a quick-release locking mechanism, further enhancing its usability and protecting against potential hazards.

In summary, both the Porter-Cable PCK3030SP and the D27927-034-0 exemplify the brand's commitment to providing high-quality, reliable tools that cater to the diverse needs of users. With advanced technologies, durable construction, and user-centric designs, these tools are valuable additions to any workshop, whether for professional tradespeople or enthusiastic home renovators. Their combination of performance and ease of use positions them as standout choices in the tool market.
Top Page Image Contents