Porter-Cable PCK4040SP, D26221-025-1 instruction manual To USE Wand

Page 10

TO USE WAND

Your pressure washer is equipped with five spray nozzles. Each nozzle is color coded and delivers a specific spray pattern for a particular cleaning purpose. The size of the nozzle determines the size of the fan spray and the pressure out of the nozzle. The 0º, 15º , 25º, and 40º nozzles are high pressure nozzles. The chemical nozzle is a low pressure nozzle.

The nozzles are housed in receptacles on the panel of the pressure washer handle. Colors on the panel identify nozzle location and spray pattern.

Risk of injection or injury to person. Do not direct discharge stream toward persons, unprotected skin, eyes, or any pets

or animals. Serious injury can occur.

Changing Nozzles

DO NOT attempt to change nozzles while pressure washer is running. Turn engine off before changing nozzles.

1.Pull quick connect coupler back and insert nozzle.

2.Release quick connect coupler and twist nozzle to make sure it is secure in coupler.

Risk Of Injury. Ensure nozzle is completely inserted in QC socket, and

QC snap ring is fully engaged (forward) before squeezing gun trigger.

0º nozzle - Red. This nozzle delivers a pinpoint stream and is extremely powerful. It covers a very small area of cleaning. This nozzle should only be used on surfaces that can withstand this high pressure such as metal or concrete. Do not use on wood.

15º nozzle - Yellow. This nozzle delivers a powerful 15 degree spray pattern for intense cleaning of small areas. This nozzle should only be used on areas that can withstand the high pressure from this nozzle.

25º nozzle - Green. This nozzle delivers a 25 degree spray pattern for intense cleaning of larger areas. This nozzle should only be used on areas that can withstand the pressure from this nozzle.

40º nozzle - White. This nozzle delivers a 40 degree spray pattern and a less powerful stream of water. It covers a wide area of cleaning. This nozzle should be used for most general cleaning jobs.

Chemical nozzle - Black. This nozzle is used to apply chemicals or cleaning solutions. It has the least powerful stream.

D26221

10- ENG

Image 10
Contents Horsepower 4000 PSI GPM Pressure Washer PCK4040SPGeneral Information Safety Guidelines / Definitions Important Safety InstructionsHazard What can Happen Risk Unsafe Operation BOX Contents Assembly Pressure Washer OperationBasic Elements of Engine Throttle Control Lever Controls engine speedTo Adjust Pressure HOW to USEPressure Washer Terminology To USE Wand Read and Understand ALL Warnings Before Starting Unit To Siphon CHEMICALS/CLEANING SolventsPress chemical hose onto barbed fitting Turn water source on. Note Make StartingTo Shut Down Depress trigger on gun to start waterEngine MaintenanceHow To Change Pump Oil PumpHOW to Clean the Water Inlet Filter WandEngine Pump StorageWindshield washer fluid may also be used Problem Troubleshooting GuideCausecorrection Cause CorrectionLimited Warranty Responsibility of Original Purchaser initial UserENG D26221 Quick Facts Call