Porter-Cable D26221-025-1, PCK4040SP instruction manual Assembly

Page 7

ASSEMBLY

1.Place handle assembly onto frame and connect handle to frame.

2.Connect wand to gun. Tighten securely.

3.Attach high pressure hose to gun. Tighten securely.

5.Assemble grommet kit and quick-connect nozzles as described in instructions supplied.

6.Add engine oil (supplied) to engine. Refer to engine manual supplied by

engine manufacturer for correct procedure.

NOTE: There will be a slight amount of oil in the engine from factory testing.

NOTE: The high pressure pump was filled with oil at the factory. There is no need to add oil at this time, see the Maintenance section of this manual for Maintenance information.

7- ENG

D26221

Image 7

Contents PCK4040SP Horsepower 4000 PSI GPM Pressure WasherGeneral Information Important Safety Instructions Safety Guidelines / DefinitionsHazard What can Happen Risk Unsafe Operation BOX Contents Assembly Throttle Control Lever Controls engine speed OperationBasic Elements of Engine Pressure WasherTo Adjust Pressure HOW to USEPressure Washer Terminology To USE Wand Read and Understand ALL Warnings Before Starting Unit To Siphon CHEMICALS/CLEANING SolventsPress chemical hose onto barbed fitting Depress trigger on gun to start water StartingTo Shut Down Turn water source on. Note MakePump MaintenanceHow To Change Pump Oil EngineWand HOW to Clean the Water Inlet FilterEngine Pump StorageWindshield washer fluid may also be used Problem Troubleshooting GuideCausecorrection Correction CauseResponsibility of Original Purchaser initial User Limited WarrantyENG D26221 Call Quick Facts