HAZARD | WHAT CAN HAPPEN |
• Breathing exhaust fumes will cause serious injury or death!
RISK TO
BREATHING
• Some cleaning fluids contain sub- stances which could cause injury to skin, eyes, or lungs.
HOW TO PREVENT IT
• Operate pressure washer in a well |
ventilated area. Avoid enclosed |
areas such as garages, basements, |
etc. |
• Never operate unit in a location |
occupied by humans or animals. |
• Use only cleaning fluids specifically |
recommended for high pressure |
washers. Follow manufacturers |
recommendations. Do not use |
chlorine bleach or any other |
corrosive compound. |
RISK OF INJURY OR PROPERTY DAMAGE WHEN TRANSPORTING OR STORING
RISK TO FLUID
INJECTION
RISK OF
CHEMICAL
BURN
•Fuel or oil can leak or spill and could result in fire or breathing hazard, serious injury or death can result. Fuel or oil leaks will dam- age carpet, paint or other surfaces in vehicles or trailers.
•Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately!
•Injuries can result if system pressure is not reduced before attempting maintenance or disassembly.
•Use of acids, toxic or corrosive chemicals, poisons, insecticides, or any kind of flammable solvent with this product could result in serious injury or death.
• If pressure washer is equipped with |
a fuel |
to the off position before |
transporting to avoid fuel leaks. If |
pressure washer is not equipped |
with a fuel |
fuel from tank before transporting. |
Only transport fuel in an OSHA |
approved container. Always place |
pressure washer on a protective |
mat when transporting to protect |
against damage to vehicle from |
leaks. Remove pressure washer |
from vehicle immediately upon arrival |
at your destination. |
• Never place hands in front of nozzle. |
• Direct spray away from self and |
others. |
• Make sure hose and fittings are |
tightened and in good condition. |
Never hold onto the hose or fittings |
during operation. |
• Do not allow hose to contact muf- |
fler. |
• Never attach or remove wand or |
hose fittings while system is pres- |
surized. |
• To relieve system pressure, shut off |
engine, turn off water supply, and |
pull gun trigger until water stops |
flowing. |
• Use only hose and high pressure |
accessories rated for pressure |
higher than your pressure washer's |
p.s.i. |
• Do not use acids, gasoline, kero- |
sene, or any other flammable |
materials in this product. Use only |
household detergents, cleaners and |
degreasers recommended for use |
in pressure washers. |
• Wear protective clothing to protect |
eyes and skin from contact with |
sprayed materials. |
D26221 | 4- ENG |