Porter-Cable A07513-0412-0 instruction manual Maintenance, Engine Pump, Nozzle Cleaning

Page 12

MAINTENANCE

When performing maintenance, you

may be exposed to hot surfaces, water pressure, or moving parts that can cause serious injury or death!

Before performing any maintenance or repair, disconnect spark plug wire, let engine cool and release all water pressure. The engine contains flammable fuel. DO NOT smoke or work near open flames while performing maintenance.

To ensure efficient operation and longer life of your pressure washer, a routine maintenance schedule should be prepared and followed. If the pressure washer is used in unusual conditions, such as high- temperatures or dusty conditions, more frequent maintenance checks will be required.

ENGINE

Consult the Engine Owners Manual for the manufacturer's recommendations for any and all maintenance. NOTE: The frame is equipped with an oil drain hole to help make changing the engine oil easier.

PUMP

The oil in the high pressure pump was designed to last the life of the pump. If there is a problem with the pump contact an Authorized Service Center.

NOZZLE CLEANING

If the nozzle becomes clogged with foreign materials, such as dirt, excessive pressure may develop. If the nozzle becomes partially clogged or restricted, the pump pressure will pulsate. Clean the nozzle immediately using the nozzle kit supplied and the following instructions:

1.Shut off the pressure washer and turn off the water supply.

2.Pull trigger on gun handle to relieve any water pressure.

3.Disconnect the spray wand from the gun.

4.Remove the high-pressure nozzle from the spray wand. Remove any obstructions with the nozzle cleaning tool provided and backflush with

clean water.

5.Direct water supply into spray wand to backflush loosened particles for 30 seconds.

6.Reassemble the nozzle to the wand.

7.Reconnect spray wand to gun and turn on water supply.

8.Start pressure washer and place spray wand into high pressure setting to test.

A07513

12- ENG

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Horsepower 2400 PSI Safety Guidelines Definitions Consumer Safety InformationImportant Safety Instructions Risk of Explosion or FireRisk of Explosion or Fire Risk to BreathingRisk to Fluid Injection Risk of Chemical Burn Risk of Electrical ShockRisk of Unsafe Operation Risk of Injury from SprayCarton Contents Operating Instructions Basic Elements of a Pressure WasherPressure Adjustments Pressure Washer TerminologyRead and Understand ALL Warnings Before Starting Unit To USE Spray WandHOW to Apply Chemicals and Cleaning Solvents Changing Nozzles on Spray WandStarting Shutting DownVerify the filter screen is in water inlet of pump Maintenance Nozzle CleaningEngine Pump HOW to Clean the Water Inlet Filter HOW to Remove the WheelsStorage Pressure WasherTrouble Shooting Guide ProblemCausecorrection Problem Cause Correction ENG A07513 Limited Warranty

A07513-0412-0 specifications

The Porter-Cable A07513-0412-0 is a highly regarded power tool designed to elevate the efficiency and precision of both professional contractors and DIY enthusiasts. With its robust engineering and thoughtful features, this tool stands out in a competitive market.

One of the defining characteristics of the A07513-0412-0 is its exceptional power-to-weight ratio. This tool is designed with a potent motor that delivers impressive performance while maintaining a lightweight profile, making it easy to handle during extended use. Its ergonomically designed grip ensures comfort, reducing fatigue and allowing the user to maintain control even during the most challenging tasks.

The A07513-0412-0 boasts advanced technology that enhances its functionality. Incorporating variable speed settings, this tool allows users to adjust the speed to suit different materials and applications, providing versatility in tasks ranging from woodworking to metalworking. Additionally, the integrated electronic feedback system offers consistent performance, maintaining speed under load for enhanced efficiency.

Durability is another key feature of this Porter-Cable tool. Constructed with high-quality materials, it is designed to withstand the rigors of daily use in demanding environments. The heavy-duty housing protects the internal components from dust and debris, ensuring longevity and reducing the need for frequent repairs.

Another noteworthy aspect of the A07513-0412-0 is its tool-free blade change system. This feature allows users to switch blades quickly and effortlessly, increasing productivity and minimizing downtime on the job site. The tool is compatible with a wide range of accessories, further expanding its versatility and utility for various projects.

Porter-Cable has also prioritized safety in the design of the A07513-0412-0. It includes comprehensive safety features, such as overload protection, which prevents overheating and extends the lifespan of the tool. The built-in LED light illuminates the working area, enhancing visibility and ensuring precision in low-light conditions.

In summary, the Porter-Cable A07513-0412-0 is a powerful, versatile, and durable tool that effectively meets the demands of various applications. Its thoughtful design, advanced technology, and user-friendly features make it an excellent choice for those seeking reliability and performance in their power tools. Whether for professional use or home improvement projects, the A07513-0412-0 promises to deliver quality results and enhance the overall user experience.
Top Page Image Contents