Porter-Cable A07513-0412-0 instruction manual Problem Cause Correction

Page 16

PROBLEM

CAUSE

CORRECTION

Will not draw

Spray wand not in low pressure.

See How to Use Spray Wand

 

paragraph in the Operation

chemicals

 

 

Section.

 

 

 

Chemical filter clogged.

Clean filter.

 

Chemical screen not in cleaning

Make sure end of chemical hose

 

solution.

is fully submerged into cleaning

 

 

solution.

 

Chemical too thick.

Dilute chemical. Chemical should

 

 

be the same consistency as water.

 

Pressure hose is too long

Lengthen water supply hose

 

 

instead of high pressure hose.

 

Chemical build up in chemical

Have parts cleaned or replaced

 

injector.

by AWSC.

No or low

Worn seal or packing

Have replaced by AWSC.

pressure

Worn or obstructed valves.

Have replaced by AWSC.

(after period

Worn unloader piston.

Have replaced by AWSC.

of normal

use)

Worn E-Z start valve.

Have replaced by AWSC.

Water leaking

Worn or broken o-ring.

Check and replace.

at gun/

 

 

spray wand

Loose hose connection.

Tighten.

connection

 

 

Water

Loose connections.

Tighten.

leaking at

Piston packings worn.

Have replaced by AWSC.

pump

Worn or broken o-rings.

 

 

Have replaced by AWSC.

 

Pump head or tubes damaged

Have replaced by AWSC.

 

from freezing.

 

Oil leaking

Oil seals worn.

Have replaced by AWSC

at pump

Loose drain plug.

Tighten.

 

 

Worn drain plug o-ring

Check and replace.

 

Worn fill plug o-ring.

Check and replace.

 

Pump overfilled.

Check for correct amount.

 

Incorrect oil used.

Drain and fill with correct amount

 

 

and type of oil.

 

Vent plug is clogged.

Clean vent plug; blow air through

 

 

it to remove any blockage. If prob-

 

 

lem persists, replace plug.

Pump

Nozzle obstructed.

See Nozzle Cleaning paragraph in

Pulsates

 

the Maintenance section for the

 

 

correct procedure.

 

 

 

A07513

16- ENG

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Horsepower 2400 PSI Safety Guidelines Definitions Consumer Safety InformationImportant Safety Instructions Risk of Explosion or FireRisk to Breathing Risk of Explosion or FireRisk to Fluid Injection Risk of Chemical Burn Risk of Electrical ShockRisk of Unsafe Operation Risk of Injury from SprayCarton Contents Operating Instructions Basic Elements of a Pressure WasherPressure Adjustments Pressure Washer TerminologyRead and Understand ALL Warnings Before Starting Unit To USE Spray WandHOW to Apply Chemicals and Cleaning Solvents Changing Nozzles on Spray WandShutting Down StartingVerify the filter screen is in water inlet of pump Nozzle Cleaning MaintenanceEngine Pump HOW to Clean the Water Inlet Filter HOW to Remove the WheelsStorage Pressure WasherProblem Trouble Shooting GuideCausecorrection Problem Cause Correction ENG A07513 Limited Warranty

A07513-0412-0 specifications

The Porter-Cable A07513-0412-0 is a highly regarded power tool designed to elevate the efficiency and precision of both professional contractors and DIY enthusiasts. With its robust engineering and thoughtful features, this tool stands out in a competitive market.

One of the defining characteristics of the A07513-0412-0 is its exceptional power-to-weight ratio. This tool is designed with a potent motor that delivers impressive performance while maintaining a lightweight profile, making it easy to handle during extended use. Its ergonomically designed grip ensures comfort, reducing fatigue and allowing the user to maintain control even during the most challenging tasks.

The A07513-0412-0 boasts advanced technology that enhances its functionality. Incorporating variable speed settings, this tool allows users to adjust the speed to suit different materials and applications, providing versatility in tasks ranging from woodworking to metalworking. Additionally, the integrated electronic feedback system offers consistent performance, maintaining speed under load for enhanced efficiency.

Durability is another key feature of this Porter-Cable tool. Constructed with high-quality materials, it is designed to withstand the rigors of daily use in demanding environments. The heavy-duty housing protects the internal components from dust and debris, ensuring longevity and reducing the need for frequent repairs.

Another noteworthy aspect of the A07513-0412-0 is its tool-free blade change system. This feature allows users to switch blades quickly and effortlessly, increasing productivity and minimizing downtime on the job site. The tool is compatible with a wide range of accessories, further expanding its versatility and utility for various projects.

Porter-Cable has also prioritized safety in the design of the A07513-0412-0. It includes comprehensive safety features, such as overload protection, which prevents overheating and extends the lifespan of the tool. The built-in LED light illuminates the working area, enhancing visibility and ensuring precision in low-light conditions.

In summary, the Porter-Cable A07513-0412-0 is a powerful, versatile, and durable tool that effectively meets the demands of various applications. Its thoughtful design, advanced technology, and user-friendly features make it an excellent choice for those seeking reliability and performance in their power tools. Whether for professional use or home improvement projects, the A07513-0412-0 promises to deliver quality results and enhance the overall user experience.
Top Page Image Contents