Porter-Cable A07513-0412-0 Read and Understand ALL Warnings Before Starting Unit

Page 9

READ AND UNDERSTAND ALL WARNINGS BEFORE STARTING UNIT

When using the high pressure setting, DO NOT allow the high pressure spray to come in contact with unprotected skin, eyes,

or with any pets or animals. Serious injury can occur.

Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately!

NEVER fill fuel tank when engine is running or hot. Do not smoke when filling fuel tank.

NEVER fill fuel tank completely. Fill tank to 1/2" below bottom of filler neck to provide space for fuel expansion. Wipe any fuel spillage from engine and equipment before starting engine.

NEVER run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

DO NOT let hoses come in contact with very hot engine muffler during or immediately after use of your pressure washer. Damage to hoses from contact with hot engine surfaces will NOT be covered by warranty.

NEVER pull water supply hose to move pressure washer. This could damage hose and/or pump inlet.

DO NOT use hot water, use cold water only.

NEVER turn water supply off while pressure washer engine is running or damage to pump will result.

DO NOT stop spraying water for more than two minutes at a time. Pump operates in bypass mode when spray gun trigger is not pressed. If pump is left in bypass mode for more than two minutes internal components of the pump can be damaged.

If you do not understand these precautions, please call 1-888-559-8550 to speak to a service representative for further instructions.

TO USE SPRAY WAND

The nozzles for the spray wand are stored in nozzle holder on the panel assembly. Colors on the panel identify nozzle location and spray pattern. See chart to choose the correct nozzle for the job to be performed.

Nozzle Color

Red

Yellow

Green

White

Black

 

0º

15º

25º

40º

low pressure

Spray

 

 

 

 

 

 

 

 

 

 

Pattern

 

 

 

 

 

 

 

 

 

 

 

 

powerful

intense

intense

covers wide

applies

Uses

pinpoint for

cleaning of

cleaning of

areas of

cleaning

very intense

 

small areas

larger areas

cleaning

solutions

 

cleaning

 

 

 

 

 

 

Metal or

metal,

metal,

metal,

metal,

Surfaces *

concrete

concrete,

concrete, or

concrete, or

concrete,

DO NOT use

wood, or

 

on wood

wood

wood

wood, or vinyl

vinyl

*

The high pressure spray from your pressure washer is

 

capable of causing damage to surfaces such as wood,

glass, automobile paint, auto striping and trim, and delicate objects such as flowers and shrubs. Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray.

9- ENG

A07513

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Horsepower 2400 PSI Consumer Safety Information Safety Guidelines DefinitionsImportant Safety Instructions Risk of Explosion or FireRisk of Explosion or Fire Risk to BreathingRisk to Fluid Injection Risk of Electrical Shock Risk of Chemical BurnRisk of Injury from Spray Risk of Unsafe OperationCarton Contents Basic Elements of a Pressure Washer Operating InstructionsPressure Washer Terminology Pressure AdjustmentsTo USE Spray Wand Read and Understand ALL Warnings Before Starting UnitChanging Nozzles on Spray Wand HOW to Apply Chemicals and Cleaning SolventsStarting Shutting DownVerify the filter screen is in water inlet of pump Maintenance Nozzle CleaningEngine Pump HOW to Remove the Wheels HOW to Clean the Water Inlet FilterPressure Washer StorageTrouble Shooting Guide ProblemCausecorrection Problem Cause Correction ENG A07513 Limited Warranty

A07513-0412-0 specifications

The Porter-Cable A07513-0412-0 is a highly regarded power tool designed to elevate the efficiency and precision of both professional contractors and DIY enthusiasts. With its robust engineering and thoughtful features, this tool stands out in a competitive market.

One of the defining characteristics of the A07513-0412-0 is its exceptional power-to-weight ratio. This tool is designed with a potent motor that delivers impressive performance while maintaining a lightweight profile, making it easy to handle during extended use. Its ergonomically designed grip ensures comfort, reducing fatigue and allowing the user to maintain control even during the most challenging tasks.

The A07513-0412-0 boasts advanced technology that enhances its functionality. Incorporating variable speed settings, this tool allows users to adjust the speed to suit different materials and applications, providing versatility in tasks ranging from woodworking to metalworking. Additionally, the integrated electronic feedback system offers consistent performance, maintaining speed under load for enhanced efficiency.

Durability is another key feature of this Porter-Cable tool. Constructed with high-quality materials, it is designed to withstand the rigors of daily use in demanding environments. The heavy-duty housing protects the internal components from dust and debris, ensuring longevity and reducing the need for frequent repairs.

Another noteworthy aspect of the A07513-0412-0 is its tool-free blade change system. This feature allows users to switch blades quickly and effortlessly, increasing productivity and minimizing downtime on the job site. The tool is compatible with a wide range of accessories, further expanding its versatility and utility for various projects.

Porter-Cable has also prioritized safety in the design of the A07513-0412-0. It includes comprehensive safety features, such as overload protection, which prevents overheating and extends the lifespan of the tool. The built-in LED light illuminates the working area, enhancing visibility and ensuring precision in low-light conditions.

In summary, the Porter-Cable A07513-0412-0 is a powerful, versatile, and durable tool that effectively meets the demands of various applications. Its thoughtful design, advanced technology, and user-friendly features make it an excellent choice for those seeking reliability and performance in their power tools. Whether for professional use or home improvement projects, the A07513-0412-0 promises to deliver quality results and enhance the overall user experience.
Top Page Image Contents