Porter-Cable A07513-0412-0 instruction manual Trouble Shooting Guide, Problem, Causecorrection

Page 15

PROBLEM

TROUBLE SHOOTING GUIDE

CAUSECORRECTION

Engine will not start (see Engine Manual for further engine troubleshooting)

No or low pressure (initial use)

No fuel.

Low oil

Pressure builds up after two pulls on the recoil starter or after initial use.

Choke lever in the “No Choke” position.

Spark plug wire not attached.

Engine ON/OFF switch in OFF position.

Choke lever in the “Choke” position on a “hot” engine or an engine that has been exposed to thermal heat for a long period of time.

Fuel valve closed

Spray wand not in high pressure.

Low water supply.

Leak at high pressure hose fitting.

Nozzle obstructed.

Water filter screen clogged.

Defective E-Z start valve.

Air in hose.

Choke lever in the “Choke” position.

Throttle control lever is not in the “Fast” position.

High pressure hose is too long.

Add Fuel.

Add required amount of oil.

Squeeze gun trigger to relieve pressure.

Move choke to the “Choke” position.

Attach spark plug wire.

Place engine ON/OFF switch in ON position.

Move choke to the “No Choke” position.

Move the fuel valve lever to the “Open” position.

See How to Use Spray Wand instructions in the Operation Section.

Water supply must be at least 5 GPM @ 20 PSI.

Repair leak. Apply sealant tape if necessary.

See Nozzle Cleaning instructions in the Maintenance section.

Remove and clean filter.

Check with Authorized Warranty Service Center (AWSC.)

Turn off the engine, then the water source. Disconnect the water source from the pump inlet and turn the water source on

to remove all air from the hose. When there is a steady stream of water present, turn water source off. Re-connect water source to pump inlet and turn on water source. Squeeze trigger to remove remaining air

Move choke to the “No Choke” position.

Move throttle control lever to the “Fast” position.

Use high pressure hose under 100 feet.

15- ENG

A07513

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Horsepower 2400 PSI Risk of Explosion or Fire Safety Guidelines DefinitionsConsumer Safety Information Important Safety InstructionsRisk of Explosion or Fire Risk to BreathingRisk to Fluid Injection Risk of Electrical Shock Risk of Chemical BurnRisk of Injury from Spray Risk of Unsafe OperationCarton Contents Basic Elements of a Pressure Washer Operating InstructionsPressure Washer Terminology Pressure AdjustmentsTo USE Spray Wand Read and Understand ALL Warnings Before Starting UnitChanging Nozzles on Spray Wand HOW to Apply Chemicals and Cleaning SolventsStarting Shutting DownVerify the filter screen is in water inlet of pump Maintenance Nozzle CleaningEngine Pump HOW to Remove the Wheels HOW to Clean the Water Inlet FilterPressure Washer StorageTrouble Shooting Guide ProblemCausecorrection Problem Cause Correction ENG A07513 Limited Warranty

A07513-0412-0 specifications

The Porter-Cable A07513-0412-0 is a highly regarded power tool designed to elevate the efficiency and precision of both professional contractors and DIY enthusiasts. With its robust engineering and thoughtful features, this tool stands out in a competitive market.

One of the defining characteristics of the A07513-0412-0 is its exceptional power-to-weight ratio. This tool is designed with a potent motor that delivers impressive performance while maintaining a lightweight profile, making it easy to handle during extended use. Its ergonomically designed grip ensures comfort, reducing fatigue and allowing the user to maintain control even during the most challenging tasks.

The A07513-0412-0 boasts advanced technology that enhances its functionality. Incorporating variable speed settings, this tool allows users to adjust the speed to suit different materials and applications, providing versatility in tasks ranging from woodworking to metalworking. Additionally, the integrated electronic feedback system offers consistent performance, maintaining speed under load for enhanced efficiency.

Durability is another key feature of this Porter-Cable tool. Constructed with high-quality materials, it is designed to withstand the rigors of daily use in demanding environments. The heavy-duty housing protects the internal components from dust and debris, ensuring longevity and reducing the need for frequent repairs.

Another noteworthy aspect of the A07513-0412-0 is its tool-free blade change system. This feature allows users to switch blades quickly and effortlessly, increasing productivity and minimizing downtime on the job site. The tool is compatible with a wide range of accessories, further expanding its versatility and utility for various projects.

Porter-Cable has also prioritized safety in the design of the A07513-0412-0. It includes comprehensive safety features, such as overload protection, which prevents overheating and extends the lifespan of the tool. The built-in LED light illuminates the working area, enhancing visibility and ensuring precision in low-light conditions.

In summary, the Porter-Cable A07513-0412-0 is a powerful, versatile, and durable tool that effectively meets the demands of various applications. Its thoughtful design, advanced technology, and user-friendly features make it an excellent choice for those seeking reliability and performance in their power tools. Whether for professional use or home improvement projects, the A07513-0412-0 promises to deliver quality results and enhance the overall user experience.
Top Page Image Contents