Porter-Cable A07708-0412-0, PCH2800C instruction manual Starting, Shutting Down

Page 11

STARTING

Prior to starting, refer to your engine manual for proper starting procedure.

1.In a well ventilated outdoor area add fresh, high quality, unleaded gasoline with a pump octane rating of 86 or higher. Do not overfill. Wipe up spilled fuel before starting the engine. Refer to Engine Owners Manual for correct procedure.

2.Check engine oil level. See Engine Owners Manual for correct procedure. NOTE: There will

be a slight amount of oil in the engine from factory testing.

Manual for correct procedure. NOTE: When engine rope is pulled, pressure starts building in the gun. If the engine does not start after two pulls, pull the gun trigger to relieve this pressure.

9.

Depress trigger on gun to

 

start water flow. NOTE: Stand

 

on a stable surface and grip

 

gun/spray wand firmly with both

 

hands. Expect the gun to kick

 

when triggered.

10.

Release trigger to stop water

 

flow.

11.

Adjust spray for the task being

 

performed by changing quick

3.Verify the filter screen is in water inlet of pump. NOTE: Cone side faces out.

Filter Screen

connect nozzle. See How To Use

Spray Wand instructions in this

section.

SHUTTING DOWN

1. After each use, if you have

applied chemicals, place chemical

4.Connect water source to pump inlet. NOTE: Water source must provide a minimum of 5 gallons per minute at 20 PSI.

5.Connect high pressure hose to pump outlet.

High Pressure Hose

Water

Source

6.If applying a chemical or cleaning solution, see How To Apply Chemicals/Cleaning Solvents instructions in this section.

7.Turn water source on. NOTE: Failure to do so could cause damage to the pump.

8.Start engine. See Engine Owners

 

hose into container of clean water

 

and draw clean water through

 

chemical injection system to rinse

 

system thoroughly. NOTE: Failure

 

to do so could cause damage to

 

the pump.

2.

Turn engine off. See Engine

 

Owner’s Manual. NOTE: NEVER

 

turn the water off with the engine

 

running.

3.

Turn water source off.

4.

Pull trigger on spray gun to

 

relieve any water pressure in

 

hose or spray gun.

5.

See Storage section in this

 

manual for proper storage

 

procedures.

11- ENG

A07708

Image 11
Contents GPM Risk of Explosion or Fire Safety Guidelines DefinitionsConsumer Safety Information Important Safety InstructionsRisk to Fluid Injection Risk of Explosion or FireRisk to Breathing Risk of Electrical Shock Risk of Chemical BurnRisk of Injury from Spray Risk of Unsafe OperationCarton Contents Basic Elements of a Pressure Washer Operating InstructionsPressure Washer Terminology Pressure AdjustmentsTo USE Spray Wand Read and Understand ALL Warnings Before Starting UnitTo Apply chemicals HOW to Apply Chemicals and Cleaning SolventsNozzles Shutting Down StartingEngine Pump MaintenanceRemove filter Nozzle CleaningHOW to Clean the Water Inlet Filter HOW to Remove the WheelsPressure Washer StorageCausecorrection Trouble Shooting GuideProblem Problem Cause Correction ENG A07708 Limited Warranty

A07708-0412-0, PCH2800C specifications

The Porter-Cable PCH2800C, A07708-0412-0 is a powerful and versatile air compressor that has garnered a significant reputation for its efficiency and reliability in both professional and DIY settings. Engineered for a range of applications, this air compressor is ideal for tasks such as inflation, nailing, and spraying, making it a valuable tool for contractors, hobbyists, and anyone in between.

One of the standout features of the PCH2800C is its powerful 2.5 horsepower motor. This robust motor allows for a quick recovery time, ensuring that users can maintain consistent airflow and pressure for demanding tasks. The compressor delivers an impressive maximum pressure of 130 psi, allowing it to tackle high-demand applications with ease. Furthermore, the 2.8-gallon tank capacity strikes an excellent balance between portability and available air volume, making it suitable for small to medium-sized jobs.

The design of the Porter-Cable PCH2800C also places a strong emphasis on portability and convenience. It features a lightweight build and a compact design, which can easily fit into tight spaces and be transported to various job sites. The integrated handle and rubberized feet enhance stability, preventing movement during operation, which is essential for safety and precision work.

In terms of technology, the PCH2800C incorporates an oil-free pump, which eliminates the need for regular maintenance while delivering clean, dry air. This feature is especially valuable for users concerned about contamination when utilizing pneumatic tools for painting or finishing. The compressor also boasts low noise levels, operating at around 75 dBa, making it a quieter option for residential use or indoor work environments, allowing you to work without disturbing the peace.

Safety features are an important aspect of the PCH2800C. The built-in thermal overload protection ensures the motor is safeguarded against overheating, providing added peace of mind during extended use. The easy-to-read pressure gauges provide real-time monitoring of air levels, ensuring optimal performance throughout its application.

In summary, the Porter-Cable PCH2800C, A07708-0412-0 air compressor stands out for its powerful motor, portability, low maintenance design, and safety features. Whether you are a seasoned professional or a DIY enthusiast, this air compressor is equipped to meet a variety of needs, making it a reliable addition to your toolkit.