Porter-Cable A07708-0412-0, PCH2800C Trouble Shooting Guide, Problem, Causecorrection

Page 15

PROBLEM

TROUBLE SHOOTING GUIDE

CAUSECORRECTION

Engine will not start (see Engine Manual for further engine troubleshooting)

No or low pressure (initial use)

No fuel.

Low oil

Pressure builds up after two pulls on the recoil starter or after initial use.

Choke lever in the “No Choke” position.

Spark plug wire not attached.

Engine ON/OFF switch in OFF position.

Choke lever in the “Choke” position on a “hot” engine or an engine that has been exposed to thermal heat for a long period of time.

Fuel valve closed

Spray wand not in high pressure.

Low water supply.

Leak at high pressure hose fitting.

Nozzle obstructed.

Water filter screen clogged.

Defective E-Z start valve.

Air in hose.

Choke lever in the “Choke” position.

Throttle control lever is not in the “Fast” position.

High pressure hose is too long.

Add Fuel.

Add required amount of oil.

Squeeze gun trigger to relieve pressure.

Move choke to the “Choke” position.

Attach spark plug wire.

Place engine ON/OFF switch in ON position.

Move choke to the “No Choke” position.

Move the fuel valve lever to the “Open” position.

See How to Use Spray Wand instructions in the Operation Section.

Water supply must be at least 5 GPM @ 20 PSI.

Repair leak. Apply sealant tape if necessary.

See Nozzle Cleaning instructions in the Maintenance section.

Remove and clean filter.

Check with Authorized Warranty Service Center (AWSC.)

Turn off the engine, then the water source. Disconnect the water source from the pump inlet and turn the water source on

to remove all air from the hose. When there is a steady stream of water present, turn water source off. Re-connect water source to pump inlet and turn on water source. Squeeze trigger to remove remaining air

Move choke to the “No Choke” position.

Move throttle control lever to the “Fast” position.

Use high pressure hose under 100 feet.

15- ENG

A07708

Page 14 Page 16
Image 15
Page 14 Page 16
Contents GPM Risk of Explosion or Fire Safety Guidelines DefinitionsConsumer Safety Information Important Safety InstructionsRisk of Explosion or Fire Risk to BreathingRisk to Fluid Injection Risk of Electrical Shock Risk of Chemical BurnRisk of Injury from Spray Risk of Unsafe OperationCarton Contents Basic Elements of a Pressure Washer Operating InstructionsPressure Washer Terminology Pressure AdjustmentsTo USE Spray Wand Read and Understand ALL Warnings Before Starting UnitHOW to Apply Chemicals and Cleaning Solvents NozzlesTo Apply chemicals Shutting Down StartingEngine Pump MaintenanceRemove filter Nozzle CleaningHOW to Clean the Water Inlet Filter HOW to Remove the WheelsPressure Washer StorageTrouble Shooting Guide ProblemCausecorrection Problem Cause Correction ENG A07708 Limited Warranty

A07708-0412-0, PCH2800C specifications

The Porter-Cable PCH2800C, A07708-0412-0 is a powerful and versatile air compressor that has garnered a significant reputation for its efficiency and reliability in both professional and DIY settings. Engineered for a range of applications, this air compressor is ideal for tasks such as inflation, nailing, and spraying, making it a valuable tool for contractors, hobbyists, and anyone in between.

One of the standout features of the PCH2800C is its powerful 2.5 horsepower motor. This robust motor allows for a quick recovery time, ensuring that users can maintain consistent airflow and pressure for demanding tasks. The compressor delivers an impressive maximum pressure of 130 psi, allowing it to tackle high-demand applications with ease. Furthermore, the 2.8-gallon tank capacity strikes an excellent balance between portability and available air volume, making it suitable for small to medium-sized jobs.

The design of the Porter-Cable PCH2800C also places a strong emphasis on portability and convenience. It features a lightweight build and a compact design, which can easily fit into tight spaces and be transported to various job sites. The integrated handle and rubberized feet enhance stability, preventing movement during operation, which is essential for safety and precision work.

In terms of technology, the PCH2800C incorporates an oil-free pump, which eliminates the need for regular maintenance while delivering clean, dry air. This feature is especially valuable for users concerned about contamination when utilizing pneumatic tools for painting or finishing. The compressor also boasts low noise levels, operating at around 75 dBa, making it a quieter option for residential use or indoor work environments, allowing you to work without disturbing the peace.

Safety features are an important aspect of the PCH2800C. The built-in thermal overload protection ensures the motor is safeguarded against overheating, providing added peace of mind during extended use. The easy-to-read pressure gauges provide real-time monitoring of air levels, ensuring optimal performance throughout its application.

In summary, the Porter-Cable PCH2800C, A07708-0412-0 air compressor stands out for its powerful motor, portability, low maintenance design, and safety features. Whether you are a seasoned professional or a DIY enthusiast, this air compressor is equipped to meet a variety of needs, making it a reliable addition to your toolkit.
Top Page Image Contents