Porter-Cable PCH2800C, A07708-0412-0 Pressure Washer Terminology, Pressure Adjustments

Page 8
Thermal Relief Valve

PRESSURE WASHER

TERMINOLOGY

PSI: Pounds per Square Inch. The unit of measure for water pressure. Also used for air pressure, hydraulic pressure, etc.

GPM: Gallons Per Minute. The unit of measure for the flow rate of water.

CU: Cleaning Units. GPM multiplied by PSI. GPM x PSI = CU

Bypass Mode: Allows water to re-circulate within pump when the gun trigger is not pulled.

Allowing the unit to run for more than

two minutes without the gun trigger pulled could cause overheating and damage to the pump.

Thermal Relief

Valve: When the temperature inside the pump rises too high the valve will open and release a gush of water in an

effort to lower the temperature inside the pump. The valve will then close.

Chemical Injection System: Mixes cleaners or cleaning solvents with the water to improve cleaning effectiveness.

Water Supply: All pressure washers must have a source of water. The minimum requirements for a water supply are 20 PSI and 5 gallons per minute.

PRESSURE WASHER OPERATING FEATURES

PRESSURE ADJUSTMENTS

The pressure setting is preset at the factory to achieve optimum pressure and cleaning. If you need to lower the pressure, it can be accomplished by these methods.

1.Back away from the surface to be cleaned. The further away you are, the less the pressure will be on the surface to be cleaned.

2.Change to the 40º nozzle - (white) this nozzle delivers a less powerful stream of water and a wider spray pattern.

DO NOT attempt to increase pump

pressure. A higher pressure setting than the factory set pressure may damage pump.

3.Reduce the speed of the gasoline engine (RPM). Slow the engine down and the water pressure will go down with it.

A07708

8- ENG

Page 7 Page 9
Image 8
Page 7 Page 9
Contents GPM Safety Guidelines Definitions Consumer Safety InformationImportant Safety Instructions Risk of Explosion or FireRisk to Fluid Injection Risk of Explosion or FireRisk to Breathing Risk of Chemical Burn Risk of Electrical ShockRisk of Unsafe Operation Risk of Injury from SprayCarton Contents Operating Instructions Basic Elements of a Pressure WasherPressure Adjustments Pressure Washer TerminologyRead and Understand ALL Warnings Before Starting Unit To USE Spray WandTo Apply chemicals HOW to Apply Chemicals and Cleaning SolventsNozzles Starting Shutting DownMaintenance Engine PumpNozzle Cleaning HOW to Clean the Water Inlet FilterHOW to Remove the Wheels Remove filterStorage Pressure WasherCausecorrection Trouble Shooting GuideProblem Problem Cause Correction ENG A07708 Limited Warranty

A07708-0412-0, PCH2800C specifications

The Porter-Cable PCH2800C, A07708-0412-0 is a powerful and versatile air compressor that has garnered a significant reputation for its efficiency and reliability in both professional and DIY settings. Engineered for a range of applications, this air compressor is ideal for tasks such as inflation, nailing, and spraying, making it a valuable tool for contractors, hobbyists, and anyone in between.

One of the standout features of the PCH2800C is its powerful 2.5 horsepower motor. This robust motor allows for a quick recovery time, ensuring that users can maintain consistent airflow and pressure for demanding tasks. The compressor delivers an impressive maximum pressure of 130 psi, allowing it to tackle high-demand applications with ease. Furthermore, the 2.8-gallon tank capacity strikes an excellent balance between portability and available air volume, making it suitable for small to medium-sized jobs.

The design of the Porter-Cable PCH2800C also places a strong emphasis on portability and convenience. It features a lightweight build and a compact design, which can easily fit into tight spaces and be transported to various job sites. The integrated handle and rubberized feet enhance stability, preventing movement during operation, which is essential for safety and precision work.

In terms of technology, the PCH2800C incorporates an oil-free pump, which eliminates the need for regular maintenance while delivering clean, dry air. This feature is especially valuable for users concerned about contamination when utilizing pneumatic tools for painting or finishing. The compressor also boasts low noise levels, operating at around 75 dBa, making it a quieter option for residential use or indoor work environments, allowing you to work without disturbing the peace.

Safety features are an important aspect of the PCH2800C. The built-in thermal overload protection ensures the motor is safeguarded against overheating, providing added peace of mind during extended use. The easy-to-read pressure gauges provide real-time monitoring of air levels, ensuring optimal performance throughout its application.

In summary, the Porter-Cable PCH2800C, A07708-0412-0 air compressor stands out for its powerful motor, portability, low maintenance design, and safety features. Whether you are a seasoned professional or a DIY enthusiast, this air compressor is equipped to meet a variety of needs, making it a reliable addition to your toolkit.
Top Page Image Contents