Porter-Cable A07708-0412-0 Nozzle Cleaning, HOW to Clean the Water Inlet Filter, Remove filter

Page 13

NOZZLE CLEANING

If the nozzle becomes clogged with foreign materials, such as dirt, excessive pressure may develop. If the nozzle becomes partially clogged or restricted, the pump pressure will pulsate. Clean the nozzle immediately using the nozzle kit supplied and the following instructions:

1.Shut off the pressure washer and turn off the water supply.

2.Pull trigger on gun handle to relieve any water pressure.

3.Disconnect the spray wand from the gun.

4.Remove the high-pressure nozzle from the spray wand. Remove any obstructions with the nozzle cleaning tool provided and backflush with clean water.

5.Direct water supply into spray wand to backflush loosened particles for 30 seconds.

6.Reassemble the nozzle to the wand.

7.Reconnect spray wand to gun and turn on water supply.

8.Start pressure washer and place spray wand into high pressure setting to test.

HOW TO CLEAN THE WATER INLET FILTER

This screen filter should be checked periodically and cleaned if necessary.

1. Remove filter

Filter Screen

by grasping

 

end and

 

removing it

 

from water

 

inlet of pump as shown.

2.Clean filter by flushing it with water on both sides.

3.Re-insert filter into water inlet of pump. NOTE: Cone side faces out.

NOTE: Do not operate pressure washer without filter properly installed.

HOW TO REMOVE THE WHEELS

1.Using a 1/8" hex head wrench loosen set screw in hub collar.

2.Slide hub collar from axle and remove the tire.

13- ENG

A07708

Page 12 Page 14
Image 13
Page 12 Page 14
Contents GPM Consumer Safety Information Safety Guidelines DefinitionsImportant Safety Instructions Risk of Explosion or FireRisk to Breathing Risk of Explosion or FireRisk to Fluid Injection Risk of Electrical Shock Risk of Chemical BurnRisk of Injury from Spray Risk of Unsafe OperationCarton Contents Basic Elements of a Pressure Washer Operating InstructionsPressure Washer Terminology Pressure AdjustmentsTo USE Spray Wand Read and Understand ALL Warnings Before Starting UnitNozzles HOW to Apply Chemicals and Cleaning SolventsTo Apply chemicals Shutting Down StartingEngine Pump MaintenanceHOW to Clean the Water Inlet Filter Nozzle CleaningHOW to Remove the Wheels Remove filterPressure Washer StorageProblem Trouble Shooting GuideCausecorrection Problem Cause Correction ENG A07708 Limited Warranty

A07708-0412-0, PCH2800C specifications

The Porter-Cable PCH2800C, A07708-0412-0 is a powerful and versatile air compressor that has garnered a significant reputation for its efficiency and reliability in both professional and DIY settings. Engineered for a range of applications, this air compressor is ideal for tasks such as inflation, nailing, and spraying, making it a valuable tool for contractors, hobbyists, and anyone in between.

One of the standout features of the PCH2800C is its powerful 2.5 horsepower motor. This robust motor allows for a quick recovery time, ensuring that users can maintain consistent airflow and pressure for demanding tasks. The compressor delivers an impressive maximum pressure of 130 psi, allowing it to tackle high-demand applications with ease. Furthermore, the 2.8-gallon tank capacity strikes an excellent balance between portability and available air volume, making it suitable for small to medium-sized jobs.

The design of the Porter-Cable PCH2800C also places a strong emphasis on portability and convenience. It features a lightweight build and a compact design, which can easily fit into tight spaces and be transported to various job sites. The integrated handle and rubberized feet enhance stability, preventing movement during operation, which is essential for safety and precision work.

In terms of technology, the PCH2800C incorporates an oil-free pump, which eliminates the need for regular maintenance while delivering clean, dry air. This feature is especially valuable for users concerned about contamination when utilizing pneumatic tools for painting or finishing. The compressor also boasts low noise levels, operating at around 75 dBa, making it a quieter option for residential use or indoor work environments, allowing you to work without disturbing the peace.

Safety features are an important aspect of the PCH2800C. The built-in thermal overload protection ensures the motor is safeguarded against overheating, providing added peace of mind during extended use. The easy-to-read pressure gauges provide real-time monitoring of air levels, ensuring optimal performance throughout its application.

In summary, the Porter-Cable PCH2800C, A07708-0412-0 air compressor stands out for its powerful motor, portability, low maintenance design, and safety features. Whether you are a seasoned professional or a DIY enthusiast, this air compressor is equipped to meet a variety of needs, making it a reliable addition to your toolkit.
Top Page Image Contents