MAINTENANCE
WHEN PERFORMING MAINTENANCE, YOU MAY BE EXPOSED TO HOT SURFACES, WATER PRESSURE, MOVING
PARTS, OR FIRE RESULTING IN DEATH. BEFORE PERFORMING ANY MAIN- TENANCE OR REPAIR, DISCONNECT SPARK PLUG WIRE, LET ENGINE COOL AND RELEASE ALL WATER PRESSURE. THE ENGINE CONTAINS FLAMMABLE FUEL. DO NOT SMOKE OR WORK NEAR OPEN FLAMES WHILE PERFORMING MAINTENANCE.
To ensure efficient operation and longer life of your pressure washer, a routine maintenance schedule should be prepared and followed. If the pressure washer is used in unusual conditions, such as
ENGINE
Refer to engine manual for the manufacturer’s recommendations for any and all maintenance.
PUMP
NOTE: The pump was filled with oil at the factory.
1.Change pump oil after the first ten (10) hours of operation and every fifty (50) hours thereafter.
How To Change Pump Oil
1.Loosen oil fill cap.
2.Place a container under the oil drain plug.
3.Remove oil drain plug.
4.After oil is drained replace oil drain plug. Tighten securely.
5.Remove oil fill cap and fill with recommended oil. See the Pump Oil Chart for the correct amount and type of oil.
6.Replace oil fill cap and tighten securely.
Oil Fill Plug | Nameplate |
|
|
Sight Glass
Oil
Drain
Plug 
PUMP OIL CHART
PUMP TYPE | OIL TYPE | OIL CAPACITY |
Annovi Reverberi (XMV) | 30 W non detergent | 13.5 oz. |
|
|
|
13- ENG | D26183 |