Porter-Cable DBSI325 instruction manual Storage, Engine Preparation, Generator

Page 15

STORAGE

If you are going to store your generator for more than 30 days, use the following information as a guide to prepare the generator for storage.

Never store generator with fuel in the tank indoors or in enclosed, poorly ventilated areas, where fumes can reach

an open flame, spark or pilot light as on a furnace, water heater, clothes dryer or other gas appliances.

ENGINE PREPARATION

1.Add fuel stabilizer to fuel tank to minimize the formation of fuel gum deposits during storage.

2.Run engine at least 10 minutes after adding stabilizer to allow it to enter the fuel system.

3.Next shut off engine.

4.Disconnect the spark plug wire and remove the spark plug.

5.Add one teaspoon of oil through the spark plug hole.

6.Place rag over spark plug hole and pull the recoil a few times to lubricate the combustion chamber.

7.Replace the spark plug, but do not connect the spark plug wire.

NOTE: If a fuel stabilizer is not used, all gasoline must be drained from the tank and carburetor to prevent gum deposits from forming on these parts and causing possible malfunction of the engine.

GENERATOR

•Clean the generator as outlined in the Maintenance Section on this manual.

•Check that cooling air slots and openings on generator are open and unobstructed.

15- ENG

D26608

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Generator Consumer Safety Information Consumer General and Service InformationRisk of Electrocution and Fire Safety Guidelines / DefinitionsImportant Safety Instructions When installing a DoubleGenerator in rain When damagedRisk of Electrocution and Fire OperationRisk of Fire Unit Indoors or in ANYConfined Area Risk of Unsafe Operation Risk of Breathing Inhalation HazardRisk of HOT Surfaces Specifications Risk of Moving PartsRisk from Lifting Grounding the Generator AssemblyRemove Generator from Carton Other Loose PartsExtension Cords Double Throw Transfer SwitchCircuit Breakers OperationKnow Your Generator Generator CapacityTo Start the Engine Connecting Electrical Loads Customer Responsibilities Table MaintenanceEngine Maintenance Generator MaintenanceStorage Engine PreparationGenerator Determining Wattage Requirements Wattage CalculationsStarting Wattage Requirements Application GuideAppliance or Load Device Typical Device Wattage Total Household Wattage CalculatorStart Troubleshooting GuideResponsibility of Original Purchaser initial User Limited WarrantyENG D26608 Quick Facts

DBSI325 specifications

The Porter-Cable DBSI325 is a highly versatile and powerful tool designed for contractors and DIY enthusiasts alike. Known for its innovative features and robust performance, this tool has gained a reputation for efficiency and reliability.

One of the standout features of the DBSI325 is its compact and lightweight design, which makes it easy to maneuver in tight spaces. Weighing in at just a few pounds, this tool allows for extended use without causing fatigue, vital for long working hours. The ergonomic handle provides a comfortable grip, ensuring precise control during operation.

This tool is equipped with a powerful motor that delivers a maximum speed, providing users with the ability to tackle a variety of tasks with ease. Whether you’re drilling through wood, metal, or masonry, the DBSI325 can handle the job. The speed settings are adjustable, allowing for greater versatility and adjustment based on the material being drilled.

Another key feature of the DBSI325 is its durable construction. Built with high-quality materials, the tool is designed to withstand the rigors of daily use on job sites. The durable housing protects the internal components, ensuring a long lifespan and minimizing the need for repairs.

Incorporating advanced technologies, the DBSI325 features a unique torque management system. This technology helps prevent over-torquing, protecting both the tool and the workpiece during operation. Additionally, the model includes a keyless chuck, which allows for quick and easy bit changes, enhancing efficiency and reducing downtime.

The depth adjustment system is another notable characteristic of the DBSI325. This feature provides precise control over drilling depth, ensuring consistent results across different projects. Whether you’re working on furniture assembly or home improvement tasks, this tool offers the accuracy required for professional-grade results.

Porter-Cable is recognized for its dedication to customer satisfaction, offering a warranty that reflects their commitment to quality. The DBSI325 is emblematic of this ethos, combining performance, durability, and user-friendly design into a single powerful tool.

In summary, the Porter-Cable DBSI325 stands out as a versatile and durable tool suitable for various applications. With its powerful motor, ergonomic design, advanced technologies, and strong construction, it is an essential addition to any toolbox, providing the performance needed to complete tasks efficiently and effectively. Whether you’re a seasoned professional or a weekend warrior, the DBSI325 is sure to meet your drilling needs.
Top Page Image Contents