Replace Fuel Filter, Check Muffler Mounting Screws

REPLACE FUEL FILTER

To replace fuel filter, drain unit by running it dry of fuel, then remove fuel cap/retainer assem- bly from tank. Pull filter from tank and remove it from the fuel line. Install new fuel filter on fuel line; reinstall parts.

Fuel Line

Fuel Filter

CHECK MUFFLER MOUNTING SCREWS

Once each year, ensure muffler mounting screws are secure and tightened properly to prevent damage.

Mounting

Screw

Muffler Cover

Holes

Screws

1.Loosen and remove the 2 screws from the muffler cover.

2.Remove the muffler cover.

3.Tighten the 2 muffler mounting screws se- curely.

4.Reinstall muffler cover and 2 screws. Tighten securely.

CARBURETOR ADJUSTMENTS

Your carburetor is equipped with limiter caps. Adjusting the carburetor is a complicated task. We recommend that you take your unit to an an authorized service dealer. Damage will occur if you turn the needles beyond the limiter stops.

WARNING: Perform the following steps after each use:

S Allow engine to cool, and secure the unit before storing or transporting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position

unit so that any sharp object cannot acci- dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time: S Clean the entire unit before lengthy stor-

age.

SStore in a clean dry area.

SLightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or fuel storage container. Follow the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom- mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

S At the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to another.

S Replace your gasoline can if it starts to rust.

-- 8 --

WT200 specifications

The Poulan WT200 is a versatile and efficient weed trimmer designed for homeowners and lawn care enthusiasts seeking an effective solution for tackling tough weed and grass problems. This tool combines power, durability, and user-friendly features, making it an indispensable addition to any garden maintenance toolkit.

At the heart of the Poulan WT200 is its robust engine, which delivers impressive performance for various trimming tasks. The engine is designed for reliability and ease of start-up, utilizing advanced technology to ensure that users can get to work quickly without frustrating delays. Its lightweight construction helps minimize user fatigue, which is crucial when working on larger properties or extended projects.

One of the standout features of the WT200 is its ergonomic design. The trimmer is equipped with a comfortable handle that allows for a secure grip, ensuring better control during operation. The adjustable shaft makes it easy to customize the length based on the user's height, promoting an optimal working posture and reducing strain on the back and arms.

The cutting system of the Poulan WT200 incorporates a dual line feed, providing a wider cutting path while reducing the time spent on trimming tasks. This efficiency is further enhanced by the automatic line advancement feature, which ensures the right amount of line is dispensed without requiring manual intervention. This means users can focus on their work without interruptions.

Another technological advancement present in the WT200 is its high-efficiency cutting head. This design not only improves cutting precision but also minimizes vibrations, providing a smoother user experience. The tool is capable of handling various terrains, from rough overgrown areas to manicured lawns, demonstrating its adaptability to different gardening needs.

The Poulan WT200 gasoline-powered weed trimmer is built with durability in mind. Made from quality materials, it withstands the rigors of regular use while maintaining a low maintenance requirement. Additionally, the friendly weight-to-power ratio ensures that users can maneuver the trimmer with ease, whether they are trimming around edges, pathways, or garden beds.

In conclusion, the Poulan WT200 weed trimmer offers a reliable, efficient, and ergonomic solution for managing weeds and grass in residential settings. Its powerful engine, user-centric design, and innovative technologies make it a valuable tool that can simplify yard maintenance, promoting a healthier and more attractive outdoor space. With the WT200, users can expect a reliable performance that meets their trimming needs season after season.