Poulan 183313 manual Before Starting the Engine, To Operate on Hills, To Transport

Page 12

OPERATION

TO OPERATE MOWER (See Fig. 6)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

•Select desired height of cut.

•Start mower blades by engaging attachment clutch control.

•TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.

"ENGAGED" POSITION

ATTACHMENT LIFT

LEVER HIGH POSITION

LOW

POSITION

ATTACHMENT CLUTCH LEVER "DISENGAGED" POSITION

DEFLECTOR

SHIELD

FIG. 6

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If slowing is necessary, move throttle control lever to slower position.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

•Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

•To restart movement, slowly release parking brake and clutch/brake pedal.

•Make all turns slowly.

TO TRANSPORT

•Raise attachment lift to highest position with attachment lift control.

•When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

•Do not push or tow tractor at more than five (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER ATTACH- MENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

•The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

•Check engine oil with tractor on level ground.

•Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, remove and read oil level. If necessary, add oil until “FULL” mark on dipstick is reached. Do not overfill.

•For cold weather operation you should change oil for easier starting (See “OIL VISCOSITY CHART” in the Customer Responsibilities section of this manual).

•To change engine oil, see the Customer Responsibilities section in this manual.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Model NO. PC1538B Safety Rules IV. ServiceGeneral Operation II. Slope OperationSafety Rules Safe Operation Practices for Ride-On MowersTable of Contents Unassembled Parts Steering WheelAssembly Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonInstall Seat See Fig Lower seat into operating position and sit on seatCheck Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine To Operate on HillsTo Transport Towing Carts and Other ATTACH- MentsMowing Tips ADD GasolineTo Start Engine See Fig Lubrication Chart Service DatesCustomer Responsibilities General RecommendationsTractor Brake OperationTires Operator Presence SystemEngine Cleaning AIR Filter See FigMuffler Spark PlugsService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Level Mower Housing Belt InstallationTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Adjust Brake See Fig To Replace Motion Drive Belt See FigTo Adjust Steering Wheel Alignment To Start Engine with a Weak BATTERYSee FigFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigReplacing Battery See Figs To Remove Hood and Grill Assembly See FigTo Replace Headlight Bulb Interlocks and RelaysTo Adjust Throttle Control Cable See Fig To Adjust CarburetorEngine Storage OtherFuel System Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number PC1538B, Product Number 954 56Electrical KEY Part Description Chassis Repair Parts Drive KEY Part NO. NO. Description Steering 140044X428 Wheel Steering 175131 Axle Asm Optional Equipment 170551 Control Th/ch Flag Seat Decals Wheels & TiresLSB42 LBD48Mower Lift 159460 Wire Asm Inner/Sprg w/plunger Mower Deck Repair Parts Service Notes Limited Warranty Policy Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

183313 specifications

The Poulan 183313 is a high-performance chainsaw designed for both professional and residential use. Engineered by Poulan, a brand known for its reliable outdoor power equipment, the 183313 model stands out with its powerful engine and innovative features. This chainsaw is particularly favored by tree care professionals, landscapers, and homeowners who require efficient cutting performance.

One of the main features of the Poulan 183313 is its robust engine. It is powered by a 18-inch bar and features a 42cc gas engine, which delivers ample power for a variety of cutting tasks. This powerful engine ensures that the chainsaw can efficiently handle branches, logs, and even whole trees with ease, making it perfect for tasks ranging from storm cleanup to firewood preparation.

The Poulan 183313 incorporates advanced technologies to enhance its performance and user experience. One such feature is the automatic oiling system. This system ensures that the saw chain is adequately lubricated during operation, which not only prolongs the life of the chain but also improves cutting efficiency. Additionally, the easy-start technology minimizes the effort needed to start the engine, allowing users to get to work quickly without excessive pulling.

Another characteristic of the Poulan 183313 is its lightweight design, which allows for better maneuverability and reduced user fatigue during extended use. The chainsaw also comes equipped with a wraparound handle, providing users with better grip and control during operation. This ergonomic design is especially beneficial for those who may need to work in awkward positions or for longer durations.

Safety features are also paramount in the design of the Poulan 183313. It is equipped with a chain brake that automatically stops the chain in the event of kickback, enhancing the user's safety during operation. Additionally, the front handguard adds an extra layer of protection, ensuring that users are shielded from potential hazards.

Overall, the Poulan 183313 chainsaw combines power, efficiency, and safety, making it an excellent choice for anyone looking for a reliable outdoor cutting tool. Whether you're a professional arborist or a homeowner tackling weekend projects, this chainsaw is designed to meet a variety of cutting needs with ease and confidence.
Top Page Image Contents