Poulan 183313 manual To Adjust Steering Wheel Alignment, Front Wheel TOE-IN/CAMBER

Page 21

SERVICE AND ADJUSTMENTS

TO ADJUST STEERING WHEEL ALIGNMENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not adjustable on your tractor. If damage has occurred to affect the front wheel toe- in or camber, contact your nearest authorized service center/department.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 23)

•Block up axle securely.

•Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

•Repair tire and reassemble.

•On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

•Replace washers and snap retaining ring securely in axle groove.

•Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

WASHERS

RETAINING

RING

TO START ENGINE WITH A WEAK BATTERY(See Fig. 24)

WARNING: Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from bat- teries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the MAINTENANCE section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

•Connect one end of the RED cable to the POSITIVE (+) terminal of each battery(A-B), taking care not to short against tractor chassis.

•Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

•Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

•BLACK cable first from chassis and then from the fully charged battery.

•RED cable last from both batteries.

AXLE COVER

WEAK OR DEAD BATTERY

FULLY CHARGED

BATTERY

SQUARE KEY (REAR WHEEL ONLY)

FIG. 23

FIG. 24

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Model NO. PC1538B IV. Service Safety RulesGeneral Operation II. Slope OperationSafe Operation Practices for Ride-On Mowers Safety RulesTable of Contents Steering Wheel Unassembled PartsTools Required for Assembly AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonLower seat into operating position and sit on seat Install Seat See FigCheck Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Operate on Hills Before Starting the EngineTo Transport Towing Carts and Other ATTACH- MentsMowing Tips ADD GasolineTo Start Engine See Fig Service Dates Lubrication ChartCustomer Responsibilities General RecommendationsBrake Operation TractorTires Operator Presence SystemEngine AIR Filter See Fig CleaningMuffler Spark PlugsService and Adjustments To Install Mower See FigTo Remove Mower See Fig Belt Installation To Level Mower HousingTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Replace Motion Drive Belt See Fig To Adjust Brake See FigTo Start Engine with a Weak BATTERYSee Fig To Adjust Steering Wheel AlignmentFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTo Remove Hood and Grill Assembly See Fig Replacing Battery See FigsTo Replace Headlight Bulb Interlocks and RelaysTo Adjust Throttle Control Cable See Fig To Adjust CarburetorEngine Other StorageFuel System Engine OILTroubleshooting Points OFF Tractor - Model Number PC1538B, Product Number 954 56 SchematicElectrical KEY Part Description Chassis Repair Parts Drive KEY Part NO. NO. Description Steering 140044X428 Wheel Steering 175131 Axle Asm Optional Equipment 170551 Control Th/ch Flag Seat Wheels & Tires DecalsLSB42 LBD48Mower Lift 159460 Wire Asm Inner/Sprg w/plunger Mower Deck Repair Parts Service Notes Limited Warranty Policy Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe Operation

183313 specifications

The Poulan 183313 is a high-performance chainsaw designed for both professional and residential use. Engineered by Poulan, a brand known for its reliable outdoor power equipment, the 183313 model stands out with its powerful engine and innovative features. This chainsaw is particularly favored by tree care professionals, landscapers, and homeowners who require efficient cutting performance.

One of the main features of the Poulan 183313 is its robust engine. It is powered by a 18-inch bar and features a 42cc gas engine, which delivers ample power for a variety of cutting tasks. This powerful engine ensures that the chainsaw can efficiently handle branches, logs, and even whole trees with ease, making it perfect for tasks ranging from storm cleanup to firewood preparation.

The Poulan 183313 incorporates advanced technologies to enhance its performance and user experience. One such feature is the automatic oiling system. This system ensures that the saw chain is adequately lubricated during operation, which not only prolongs the life of the chain but also improves cutting efficiency. Additionally, the easy-start technology minimizes the effort needed to start the engine, allowing users to get to work quickly without excessive pulling.

Another characteristic of the Poulan 183313 is its lightweight design, which allows for better maneuverability and reduced user fatigue during extended use. The chainsaw also comes equipped with a wraparound handle, providing users with better grip and control during operation. This ergonomic design is especially beneficial for those who may need to work in awkward positions or for longer durations.

Safety features are also paramount in the design of the Poulan 183313. It is equipped with a chain brake that automatically stops the chain in the event of kickback, enhancing the user's safety during operation. Additionally, the front handguard adds an extra layer of protection, ensuring that users are shielded from potential hazards.

Overall, the Poulan 183313 chainsaw combines power, efficiency, and safety, making it an excellent choice for anyone looking for a reliable outdoor cutting tool. Whether you're a professional arborist or a homeowner tackling weekend projects, this chainsaw is designed to meet a variety of cutting needs with ease and confidence.
Top Page Image Contents