Poulan 183313 manual Service and Adjustments, To Remove Mower See Fig, To Install Mower See Fig

Page 18

SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

•Depress clutch/brake pedal fully and set parking brake.

•Place gearshift lever in neutral (N) position.

•Place attachment clutch in “DISENGAGED” position.

•Turn ignition key to “STOP” and remove key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER (See Fig. 15)

Mower will be easier to remove from the right side of tractor.

•Place attachment clutch in “DISENGAGED” position.

•Move attachment lift lever forward to lower mower to its lowest position.

•Roll belt off engine pulley.

•Remove small retainer spring, and lift clutch spring off pulley bolt.

•Remove large retainer spring, slide collar off and push housing guide out of bracket.

•Disconnect anti-swaybar from chassis bracket by re- moving retainer spring.

•Disconnect suspension arms from rear deck brackets by removing retainer springs.

TO INSTALL MOWER (See Fig. 15)

•Raise attachment lift lever to its highest position.

•Slide mower under tractor with deflector shield to right side of tractor.

•Lower lift lever to its lowest position.

•Connect front links to mower deck and secure with retainer springs.

•Connect suspension arms to rear deck brackets and secure with retainer springs.

•Connect anti-swaybar to chassis bracket and secure with retainer spring.

•Push clutch cable housing guide into bracket, slide collar onto guide and secure with large retainer spring.

•Install belt onto engine pulley.

•Disconnect front links from deck by removing retainer springs.

•Raise lift lever to raise suspension arms. Slide mower out from under tractor.

IMPORTANT: IF AN ATTACHMENT OTHER THAN THE MOWER DECK IS TO BE MOUNTED ON THE TRAC- TOR, REMOVE THE FRONT LINKS AND HOOK THE CLUTCH SPRING INTO SQUARE HOLE IN FRAME.

SUSPENSION ARMS

SQUARE HOLE

SMALL RETAINER SPRING

ENGINE PULLEY

CLUTCH SPRING

FRONT LINK

RETAINER SPRING

ANTI-SWAY BAR

RETAINER SPRINGS

 

(BOTH SIDES)

COLLAR

 

HOUSING GUIDE

LARGE

 

 

 

RETAINER

 

 

 

SPRING

BRACKET

DEFLECTOR SHIELD

Fig. 15

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Model NO. PC1538B General Operation Safety RulesIV. Service II. Slope OperationSafety Rules Safe Operation Practices for Ride-On MowersTable of Contents Unassembled Parts Steering WheelHOW to SET UP Your Tractor AssemblyTools Required for Assembly To Remove Tractor from CartonInstall Seat See Fig Lower seat into operating position and sit on seatCheck for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Transport Before Starting the EngineTo Operate on Hills Towing Carts and Other ATTACH- MentsMowing Tips ADD GasolineTo Start Engine See Fig Customer Responsibilities Lubrication ChartService Dates General RecommendationsTires TractorBrake Operation Operator Presence SystemEngine Muffler CleaningAIR Filter See Fig Spark PlugsService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Replace Mower Blade Drive Belt See Fig To Level Mower HousingBelt Installation Belt RemovalTo Adjust Brake See Fig To Replace Motion Drive Belt See FigFront Wheel TOE-IN/CAMBER To Adjust Steering Wheel AlignmentTo Start Engine with a Weak BATTERYSee Fig To Remove Wheel for Repairs See FigTo Replace Headlight Bulb Replacing Battery See FigsTo Remove Hood and Grill Assembly See Fig Interlocks and RelaysTo Adjust Throttle Control Cable See Fig To Adjust CarburetorEngine Fuel System StorageOther Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number PC1538B, Product Number 954 56Electrical KEY Part Description Chassis Repair Parts Drive KEY Part NO. NO. Description Steering 140044X428 Wheel Steering 175131 Axle Asm Optional Equipment 170551 Control Th/ch Flag Seat LSB42 DecalsWheels & Tires LBD48Mower Lift 159460 Wire Asm Inner/Sprg w/plunger Mower Deck Repair Parts Service Notes Limited Warranty Policy Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

183313 specifications

The Poulan 183313 is a high-performance chainsaw designed for both professional and residential use. Engineered by Poulan, a brand known for its reliable outdoor power equipment, the 183313 model stands out with its powerful engine and innovative features. This chainsaw is particularly favored by tree care professionals, landscapers, and homeowners who require efficient cutting performance.

One of the main features of the Poulan 183313 is its robust engine. It is powered by a 18-inch bar and features a 42cc gas engine, which delivers ample power for a variety of cutting tasks. This powerful engine ensures that the chainsaw can efficiently handle branches, logs, and even whole trees with ease, making it perfect for tasks ranging from storm cleanup to firewood preparation.

The Poulan 183313 incorporates advanced technologies to enhance its performance and user experience. One such feature is the automatic oiling system. This system ensures that the saw chain is adequately lubricated during operation, which not only prolongs the life of the chain but also improves cutting efficiency. Additionally, the easy-start technology minimizes the effort needed to start the engine, allowing users to get to work quickly without excessive pulling.

Another characteristic of the Poulan 183313 is its lightweight design, which allows for better maneuverability and reduced user fatigue during extended use. The chainsaw also comes equipped with a wraparound handle, providing users with better grip and control during operation. This ergonomic design is especially beneficial for those who may need to work in awkward positions or for longer durations.

Safety features are also paramount in the design of the Poulan 183313. It is equipped with a chain brake that automatically stops the chain in the event of kickback, enhancing the user's safety during operation. Additionally, the front handguard adds an extra layer of protection, ensuring that users are shielded from potential hazards.

Overall, the Poulan 183313 chainsaw combines power, efficiency, and safety, making it an excellent choice for anyone looking for a reliable outdoor cutting tool. Whether you're a professional arborist or a homeowner tackling weekend projects, this chainsaw is designed to meet a variety of cutting needs with ease and confidence.
Top Page Image Contents