Poulan YTH2148 owner manual Purge Transmission, Mowing Tips, Automatic Transmission Warm UP

Page 15

OPERATION

AUTOMATIC TRANSMISSION WARM UP

Before driving the unit in cold weather, the transmission should be warmed up as follows:

Be sure the tractor is on level ground.

Place the motion control lever in neutral. Release the parking brake and let the clutch/

brake slowly return to operating position.

Allow one minute for transmission to warm up.This can be done during the engine warm up period.

The attachments can be used during the engine warm- up period after the transmission has been warmed up and may require the choke control be pulled out slightly.

NOTE: If at a high altitude (above 3000 feet) or in cold temperatures (below 32 F) the carburetor fuel mixture may need to be adjusted for best engine performance. See “TO ADJUST CARBURETOR” in the Service and Adjustments section of this manual.

PURGE TRANSMISSION

CAUTION: Never engage or disengage freewheel lever while the engine is run- ning.

To ensure proper operation and performance, it is recom- mended that the transmission be purged before operating tractor for the fi rst time. This procedure will remove any trapped air inside the transmission which may have de- veloped during shipping of your tractor.

IMPORTANT: SHOULDYOURTRANSMISSION REQUIRE REMOVAL FOR SERVICE OR REPLACEMENT, IT SHOULD BE PURGED AFTER REINSTALLATION BEFORE OPERATING THE TRACTOR.

Place tractor safely on level surface with engine off and parking brake set.

Disengage transmission by placing freewheel control in freewheeling position (See “TOTRANSPORT” in this section of manual).

Sitting in the tractor seat, start engine. After the en- gine is running, move throttle control to slow position. With motion control lever in neutral (N) position, slowly disengage clutch/brake pedal.

Move motion control lever to full forward position and hold for fi ve (5) seconds. Move lever to full reverse position and hold for fi ve (5) seconds. Repeat this procedure three (3) times.

NOTE: During this procedure there will be no movement of drive wheels. The air is being removed from hydraulic drive system.

Move motion control lever to neutral (N) position. Shut- off engine and set parking brake.

Engage transmission by placing freewheel control in driving position (See “TO TRANSPORT” in this section of manual).

Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed. With motion control lever in neutral (N) position, slowly disengage clutch/brake pedal.

Slowly move motion control lever forward, after the tractor moves approximately fi ve (5) feet, slowly move motion control lever to reverse position. After the tractor moves approximately fi ve (5) feet return the motion control lever to the neutral (N) position. Repeat this procedure with the motion control lever three (3) times.

Your transmission is now purged and now ready for normal operation.

MOWING TIPS

Mower should be properly leveled for best mowing per- formance. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

The left hand side of mower should be used for trim- ming.

Drive so that clippings are discharged onto the area that has been cut. Have the cut area to the right of the machine. This will result in a more even distribution of clippings and more uniform cutting.

When mowing large areas, start by turning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds, mow in the opposite direction making left hand turns until fi nished (See Fig. 12).

00272

FIG. 12

If grass is extremely tall, it should be mowed twice to reduce load and possible fi re hazard from dried clip- pings. Make fi rst cut relatively high; the second to the desired height.

Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing.

Always operate engine at full throttle when mow- ing to assure better mowing performance and proper discharge of material. Regulate ground speed by se- lecting a low enough gear to give the mower cutting performance as well as the quality of cut desired.

When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used.

15

Image 15
Contents YTH2148 II. Slope Operation Safety RulesIV. Service General OperationSafety Rules Table of Contents Steering Wheel Mower Unassembled PartsTo Remove Tractor from Carton AssemblyTools Required for Assembly HOW to SET UP Your TractorInstall Seat See Fig To Attach Nose Roller See FigAssemble Gauge Wheels to Mower Deck See Fig Install Mower and Drive Belt See Figs Check Brake System Check Tire PressureCheck Mower Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Transport See Figs To Adjust Gauge Wheels See FigTo Operate Mower See Fig To Operate on HillsADD Gasoline Before Starting the EngineTowing Carts and Other ATTACH- Ments Check Engine OIL LevelPurge Transmission Mowing TipsAutomatic Transmission Warm UP Maintenance General RecommendationsBefore Each USE Tractor Engine Cleaning Service and Adjustments To Install MowerTo Remove Mower See Fig FRONT-TO-BACK Adjustment See Figs To Level Mower HousingTo Replace Mower Blade Secondary Drive Belt See Fig To Replace Mower Drive BeltTo Replace Motion Drive Belt See Fig To Check and Adjust Brake See FigTransmission REMOVAL/REPLACEMENT To Adjust Steering Wheel AlignmentFront Wheel TOE-IN/CAMBER To Replace Headlight Bulb To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorEngine OIL StorageOther Fuel SystemProblem Cause Correction Troubleshooting PointsWith attachment clutch Suggested Guide for Sighting Slopes for Safe Operation Warranty Statement 532 19 18-27 Rev 4.14.04 rad/MH

YTH2148 specifications

The Poulan YTH2148 is a powerful and versatile riding lawn mower designed for homeowners who value efficiency and quality in lawn care. With its robust build and user-friendly features, this tractor stands out as a reliable option for maintaining medium to large-sized lawns.

One of the main features of the YTH2148 is its 21.5 HP Briggs & Stratton engine. This reliable engine provides ample power for tackling tough grass and uneven terrains, ensuring a consistent performance throughout your mowing tasks. Additionally, the easy-start ignition system makes getting the engine running hassle-free, allowing you to start your mowing session with minimal delay.

The cutting deck on the Poulan YTH2148 measures 48 inches in width, making it suitable for covering large areas quickly. The deck is made from durable steel, designed to withstand the rigors of regular use. Furthermore, the mower features a deck lift system that is simple and efficient, allowing you to adjust the cutting height with ease. The cutting height can be set in multiple positions, ranging from 1.5 to 4 inches, enabling you to achieve the perfect cut for your lawn type.

Another notable characteristic of the YTH2148 is its hydrostatic transmission. This advanced technology provides smooth and effortless speed control without the need for manual shifting. This feature is particularly beneficial when navigating around obstacles or making tight turns, as it allows for seamless acceleration and deceleration.

Comfort is also a priority in the design of the Poulan YTH2148. The mower is equipped with an ergonomic seat that provides ample cushioning and back support, ensuring that you can mow for extended periods without discomfort. The wide footrests and easy-to-reach controls further enhance the rider's comfort and ease of operation.

For added convenience, the YTH2148 features a compact design, making it easy to maneuver in tight spaces and around landscaping features. With a turning radius of 16 inches, it can navigate flower beds and garden edges with precision.

Overall, the Poulan YTH2148 combines power, efficiency, and comfort in a well-designed package, making it an exceptional choice for those who take pride in their lawn care. Whether you are a seasoned lawn care expert or a homeowner looking to maintain your yard, the YTH2148 delivers performance and reliability that you can count on.