Poulan YTH2148 To Replace Mower Drive Belt, To Replace Mower Blade Secondary Drive Belt See Fig

Page 22

SERVICE AND ADJUSTMENTS

TO REPLACE MOWER DRIVE BELT

MOWER DRIVE BELT REMOVAL (See Fig. 23)

•Park tractor on a level surface. Engage parking brake.

•Lower mower to its lowest position.

Remove screws from R.H. mandrel cover and remove cover.

•Remove any dirt or grass clippings which may have accumulated around mandrels and entire upper deck surface.

•Disconnect R.H.suspension arm from rear deck bracket by removing retainer spring.

•Roll belt over the top of R.H. mandrel pulley carefully.

•Remove belt from electric clutch pulley.

•Remove belt from idler pulleys.

•Check primary idler arm and two idlers to see that they rotate freely.

•Be sure spring is securely hooked to primary idler arm and spring arm.

MOWER DRIVE BELT INSTALLATION (See Fig. 23)

•Install belt in both idlers.

•Install new belt onto electric clutch pulley.

•Roll belt into upper groove of R.H. mandrel pulley care- fully.

•Carefully check belt routing making sure belt is in the grooves correctly.

•Reconnect R.H. suspension arm to rear deck bracket with retainer spring.

•Reassemble R.H. mandrel cover.

RH MANDREL

 

COVER

ELECTRIC

 

CLUTCH

 

PULLEY

 

IDLER

 

PULLEYS

SPRING ARM

 

RH SUSPENSION

 

ARM

 

PRIMARY IDLER ARM

02514

R.H. MANDREL

 

FIG. 23

TO REPLACE MOWER BLADE (SECONDARY) DRIVE BELT (See Fig. 24)

Park the tractor on level surface. Engage parking brake.

•Remove mower (See “TO REMOVE MOWER” in this section of manual).

•Remove screws from R.H. and L.H. mandrel covers and remove covers.

REMOVE MOWER DRIVE BELT

(Refer to “TO REMOVE MOWER DRIVE BELT” illustration in this section of manual).

•Carefully roll belt over the top of R.H. mandrel pulley.

•Remove belt from idler pulleys.

•Check primary idler arm and two idlers to see that they rotate freely.

•Be sure spring is securely hooked to primary idler arm and spring arm.

REMOVE MOWER BLADE (SECONDARY) DRIVE BELT

•Carefully roll belt off L.H. mandrel pulley.

•Remove belt from center mandrel pulley, idler pulley, and R.H. mandrel pulley.

•Remove any dirt or grass which may have accumulated around mandrels and entire upper deck surface.

•Check secondary idler arm and idler pulley to see that they rotate freely.

•Be sure spring is hooked in secondary idler arm and secondary spring arm.

INSTALL NEW MOWER BLADE (SECONDARY) DRIVE BELT

•Install new belt in lower groove of R.H. mandrel pulley, idler pulley, and center mandrel pulley as shown.

•Carefully roll belt over L.H. mandrel pulley. Make sure belt is in all grooves properly.

REINSTALL MOWER DRIVE BELT

(Refer to “TO REMOVE MOWER DRIVE BELT” illustration in this section of manual).

•Install belt into upper groove of R.H. mandrel pulley and around both idlers. Pull belt to front of mower to remove slack.

•Reinstall mandrel covers and securely tighten all screws.

•Carefully check belt routing making sure belt is in all grooves correctly.

•Reinstall mower to tractor (See “TO INSTALL MOWER” in this section of manual).

L.H. MANDREL

SECONDARY

 

IDLER ARM

 

SPRING

 

SECONDARY

 

SPRING ARM

 

CENTER

 

MANDREL

IDLER

PULLEY

R.H. MANDREL

02515

 

FIG. 24

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents YTH2148 General Operation Safety RulesIV. Service II. Slope OperationSafety Rules Table of Contents Unassembled Parts Steering Wheel MowerHOW to SET UP Your Tractor AssemblyTools Required for Assembly To Remove Tractor from CartonTo Attach Nose Roller See Fig Install Seat See FigAssemble Gauge Wheels to Mower Deck See Fig Install Mower and Drive Belt See Figs Check for Proper Position of ALL Belts Check Tire PressureCheck Mower Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Operate on Hills To Adjust Gauge Wheels See FigTo Operate Mower See Fig To Transport See FigsCheck Engine OIL Level Before Starting the EngineTowing Carts and Other ATTACH- Ments ADD GasolineMowing Tips Purge TransmissionAutomatic Transmission Warm UP General Recommendations MaintenanceBefore Each USE Tractor Engine Cleaning To Install Mower Service and AdjustmentsTo Remove Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Replace Mower Drive Belt To Replace Mower Blade Secondary Drive Belt See FigTo Check and Adjust Brake See Fig To Replace Motion Drive Belt See FigTo Adjust Steering Wheel Alignment Transmission REMOVAL/REPLACEMENTFront Wheel TOE-IN/CAMBER To Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control To Replace Headlight BulbFuel System StorageOther Engine OILTroubleshooting Points Problem Cause CorrectionWith attachment clutch Suggested Guide for Sighting Slopes for Safe Operation Warranty Statement 532 19 18-27 Rev 4.14.04 rad/MH

YTH2148 specifications

The Poulan YTH2148 is a powerful and versatile riding lawn mower designed for homeowners who value efficiency and quality in lawn care. With its robust build and user-friendly features, this tractor stands out as a reliable option for maintaining medium to large-sized lawns.

One of the main features of the YTH2148 is its 21.5 HP Briggs & Stratton engine. This reliable engine provides ample power for tackling tough grass and uneven terrains, ensuring a consistent performance throughout your mowing tasks. Additionally, the easy-start ignition system makes getting the engine running hassle-free, allowing you to start your mowing session with minimal delay.

The cutting deck on the Poulan YTH2148 measures 48 inches in width, making it suitable for covering large areas quickly. The deck is made from durable steel, designed to withstand the rigors of regular use. Furthermore, the mower features a deck lift system that is simple and efficient, allowing you to adjust the cutting height with ease. The cutting height can be set in multiple positions, ranging from 1.5 to 4 inches, enabling you to achieve the perfect cut for your lawn type.

Another notable characteristic of the YTH2148 is its hydrostatic transmission. This advanced technology provides smooth and effortless speed control without the need for manual shifting. This feature is particularly beneficial when navigating around obstacles or making tight turns, as it allows for seamless acceleration and deceleration.

Comfort is also a priority in the design of the Poulan YTH2148. The mower is equipped with an ergonomic seat that provides ample cushioning and back support, ensuring that you can mow for extended periods without discomfort. The wide footrests and easy-to-reach controls further enhance the rider's comfort and ease of operation.

For added convenience, the YTH2148 features a compact design, making it easy to maneuver in tight spaces and around landscaping features. With a turning radius of 16 inches, it can navigate flower beds and garden edges with precision.

Overall, the Poulan YTH2148 combines power, efficiency, and comfort in a well-designed package, making it an exceptional choice for those who take pride in their lawn care. Whether you are a seasoned lawn care expert or a homeowner looking to maintain your yard, the YTH2148 delivers performance and reliability that you can count on.
Top Page Image Contents