Poulan 430673 manual Service and Adjustments, To Remove Mower See Fig, To Install Mower See Fig

Page 18

SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

•Depress clutch/brake pedal fully and set parking brake.

•Place gearshift lever in neutral position.

•Place attachment clutch in “DISENGAGED” position.

•Turn ignition key to “STOP” and remove key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TO REMOVE MOWER (See Fig. 15)

Mower will be easier to remove from the right side of trac- tor.

•Place attachment clutch in “DISENGAGED” position.

•Move attachment lift lever forward to lower mower to its lowest position.

•Roll belt off engine pulley.

•Remove small retainer spring, and remove clutch spring off pulley bolt.

•Remove large retainer spring, slide collar off and push housing guide out of bracket.

•Disconnect anti-swaybar from chassis bracket by re- moving retainer spring.

•Disconnect suspension arms from rear deck brackets by removing retainer springs.

•Disconnect front links from deck by removing retainer springs.

•Raise lift lever to raise suspension arms. Slide mower out from under tractor.

IMPORTANT: IF AN ATTACHMENT OTHER THAN THE MOWER DECK IS TO BE MOUNTED ON THE TRACTOR, REMOVE THE FRONTLINKSANDHOOKTHECLUTCHSPRINGINTOSQUARE HOLE IN FRAME.

TO INSTALL MOWER (See Fig. 15)

•Raise attachment lift lever to its highest position.

•Slide mower under tractor with deflector shield to right side of tractor.

•Lower lift lever to its lowest position.

•Connect front links to mower deck and secure with retainer springs..

•Connect suspension arms to rear deck brackets and secure with retainer springs.

•Connect anti-swaybar to chassis bracket and secure with retainer spring.

•Push clutch cable housing guide into bracket, slide col- lar onto guide and secure with large retainer spring.

•Place flat washer and clutch spring on idler pulley bolt and secure with small retainer spring.

•Install belt onto engine pulley.

 

SMALL RETAINER SPRING

 

 

 

CLUTCH SPRING

 

 

 

 

FLAT WASHER

 

SQUARE HOLE

SMALL RETAINER SPRING

 

SUSPENSION

ENGINE PULLEY

 

ARMS

 

 

 

 

 

 

 

CLUTCH SPRING

 

 

 

 

 

 

 

 

FRONT LINK

RETAINER SPRING

 

 

 

 

ANTI-SWAY BAR

 

 

 

 

 

 

 

 

RETAINER SPRINGS

COLLAR

 

 

 

(BOTH SIDES)

 

 

 

 

 

LARGE

 

 

 

HOUSING GUIDE

RETAINER

 

 

 

 

SPRING

BRACKET

 

 

 

 

 

DEFLECTOR SHIELD

 

 

 

 

Fig. 15

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents PO17542LT General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationService III. ChildrenIV. Towing Table of Contents Unassembled Parts Steering WheelTo Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidCheck Brake System Check Deck LevelnessCheck for Proper Position of ALL Belts Check Tire PressureOperation Know Your Tractor HOW to USE Your Tractor To Transport Reverse Operation System ROSTo Operate on Hills Towing Carts and Other AttachmentsADD Gasoline Before Starting the EngineCheck Engine OIL Level To Start Engine See FigMowing Tips Maintenance General RecommendationsBlade Care BatteryTractor Blade Removal See FigBelts Transaxle MaintenanceEngine LubricationAIR Filter CleaningClean AIR Screen MufflerService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Replace Mower Blade Drive Belt See Fig To Check BrakeTo Replace Motion Drive Belt See Fig To Start Engine with a Weak Battery See Fig Transaxle Gear Shift Lever Neutral Adjustment See FigTo Adjust Steering Wheel Alignment Front Wheel TOE-IN/CAMBERTo Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control To Replace Headlight BulbFuel System StorageOther Engine OILTroubleshooting Points Excessive Service Notes Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXLimited Warranty

9601210000, 430673 specifications

The Poulan 430673, also known by its part number 9601210000, is a noteworthy product in the outdoor power equipment market, specifically designed for lawn care enthusiasts and landscaping professionals alike. Known for its durability and efficient performance, this model has gained a reputation for reliability over the years.

One of the main features of the Poulan 430673 is its powerful engine, which boasts a robust output ideal for tackling tougher lawn maintenance tasks. With adequate horsepower, users can confidently manage a variety of yard sizes and grass types without experiencing a drop in performance. The unit is designed to provide consistent power, ensuring efficient operation during extended use.

Furthermore, the Poulan 430673 incorporates advanced technology that enhances user experience and overall performance. The engine features a patented starting mechanism, often characterized by an easy-start function, allowing users to quickly start the machine without the frustration that comes with traditional recoil starters. This feature especially appeals to those who may not have extensive experience with outdoor power tools.

The ergonomic design of the Poulan 430673 reflects an understanding of user comfort and ease of handling. It is equipped with a comfortable grip and lightweight structure, minimizing strain during operation. This practicality makes it easier for users to navigate around complex garden layouts or longer work sessions without physical fatigue.

In terms of safety, the Poulan 430673 also comes equipped with several features aimed at protecting the user. A safety switch prevents accidental startups, providing peace of mind when transporting or storing the unit. The design actively promotes safe operation, encouraging users to adhere to necessary precautions while maintaining their yards.

Additionally, this model stands out due to its compatibility with various attachments and accessories. This versatility allows users to customize their experience based on specific yard needs, whether it's clearing debris, edging, or mulching. The adaptability of the Poulan 430673 makes it not just a single-purpose tool, but a multifaceted piece of equipment that can grow with the user’s gardening or landscaping projects.

In conclusion, the Poulan 430673, with its powerful engine, user-friendly features, ergonomic design, safety measures, and compatibility with various attachments, serves as an excellent choice for individuals seeking reliable outdoor power equipment. It embodies a perfect blend of technology and practicality, making it a favored option among both casual gardeners and serious landscapers.
Top Page Image Contents