Tools Required for Assembly, Unpack Carton

ASSEMBLY

Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes are listed.

(1)	5/16" wrench	Utility knife
(2)	7/16" wrenches	Tire pressure gauge
(2) 1/2" wrenches		Pliers
(1)	9/16" wrench

When right or left hand is mentioned in this manual, it means when you are in the operating position (seated behind the steering wheel).

TO REMOVE TRACTOR FROM

CARTON

UNPACK CARTON

•Remove all accessible loose parts and parts cartons from carton.

•Cut along dotted lines on all four panels of carton. Remove end panels and lay side panels flat.

•Check for any additional loose parts or cartons and remove.

TO CHECK BATTERY (See Fig. 1)

•Lift seat to raised position.

NOTE: If this battery is put into service after month and year indicated on label (label is located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in Maintenance section of this manual for charging instructions).

•For battery and battery cable installation see "RE- PLACING BATTERY" in the "Service and Adjustments" section in this manual.

SEAT

LABEL

02602

Fig. 1

BEFORE REMOVING TRACTOR FROM SKID

ATTACH STEERING WHEEL (See Fig. 2)

ASSEMBLE EXTENSION SHAFT AND BOOT

•Slide extension shaft onto lower steering shaft.

•Place tabs of steering boot over tab slots in dash and push down to secure.

INSTALL STEERING WHEEL

•Position front wheels of the tractor so they are pointing straight forward.

•Remove steering wheel adapter from steering wheel and slide adapter onto steering shaft extension.

•Position steering wheel so cross bars are horizontal (left to right) and slide inside boot and onto adapter.

•Assemble large flat washer, 5/16 lock washer, 5/16 hex bolt and tighten securely.

•Snap steering wheel insert into center of steering wheel.

•Remove protective materials from tractor hood and grill.

IMPORTANT: CHECK FOR AND REMOVE ANY STAPLES IN SKID THAT MAY PUNCTURE TIRES WHERE TRACTOR IS TO ROLL OFF SKID.

INSERT

BOLT

LOCK

WASHER

LARGE FLAT

WASHER

STEERING

WHEEL

STEERING

BOOT

ADAPTER

	LOWER	EXTENSION
	LOWER	SHAFT
	STEERING	SHAFT
	SHAFT

Fig. 2

INSTALL SEAT (See Fig. 3)

Adjust seat before tightening adjustment knob.

•Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard pack- ing. Remove the cardboard packing and discard.

9601210000, 430673 specifications

The Poulan 430673, also known by its part number 9601210000, is a noteworthy product in the outdoor power equipment market, specifically designed for lawn care enthusiasts and landscaping professionals alike. Known for its durability and efficient performance, this model has gained a reputation for reliability over the years.

One of the main features of the Poulan 430673 is its powerful engine, which boasts a robust output ideal for tackling tougher lawn maintenance tasks. With adequate horsepower, users can confidently manage a variety of yard sizes and grass types without experiencing a drop in performance. The unit is designed to provide consistent power, ensuring efficient operation during extended use.

Furthermore, the Poulan 430673 incorporates advanced technology that enhances user experience and overall performance. The engine features a patented starting mechanism, often characterized by an easy-start function, allowing users to quickly start the machine without the frustration that comes with traditional recoil starters. This feature especially appeals to those who may not have extensive experience with outdoor power tools.

The ergonomic design of the Poulan 430673 reflects an understanding of user comfort and ease of handling. It is equipped with a comfortable grip and lightweight structure, minimizing strain during operation. This practicality makes it easier for users to navigate around complex garden layouts or longer work sessions without physical fatigue.

In terms of safety, the Poulan 430673 also comes equipped with several features aimed at protecting the user. A safety switch prevents accidental startups, providing peace of mind when transporting or storing the unit. The design actively promotes safe operation, encouraging users to adhere to necessary precautions while maintaining their yards.

Additionally, this model stands out due to its compatibility with various attachments and accessories. This versatility allows users to customize their experience based on specific yard needs, whether it's clearing debris, edging, or mulching. The adaptability of the Poulan 430673 makes it not just a single-purpose tool, but a multifaceted piece of equipment that can grow with the user’s gardening or landscaping projects.

In conclusion, the Poulan 430673, with its powerful engine, user-friendly features, ergonomic design, safety measures, and compatibility with various attachments, serves as an excellent choice for individuals seeking reliable outdoor power equipment. It embodies a perfect blend of technology and practicality, making it a favored option among both casual gardeners and serious landscapers.