Poulan 9601210000, 430673 manual Check Deck Levelness, Check for Proper Position of ALL Belts

Page 7

ASSEMBLY

•Place seat on seat pan and assemble shoulder bolt. Tighten shoulder bolt securely.

•Assemble adjustment knob and flat washer loosely. Do not tighten.

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment knob securely.

SEAT PAN

SEAT

 

CHECK DECK LEVELNESS

For best cutting results, mower housing should be prop- erly leveled. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is operating properly. See “TO CHECK BRAKE”

SHOULDER BOLT

ADJUSTMENT KNOB

00835

FLAT WASHER

in the Service and Adjustments section of this manual.

✓CHECKLIST

BEFORE YOU OPERATE YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PER- FORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓ All assembly instructions have been completed.

✓

No remaining loose parts in carton.

✓

Battery is properly prepared and charged. (Minimum

Fig. 3

NOTE: You may now roll your tractor off the skid. Follow the instructions below to remove the tractor from the skid.

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls)

•Raise attachment lift lever to its highest position.

•Releaseparkingbrakebydepressingclutch/brakepedal.

•Place gearshift lever in neutral (N) position.

•Roll tractor forward off skid.

•Remove banding holding the deflector shield up against tractor.

Continue with the instructions that follow.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown on tires.

1 hour at 6 amps).

✓ Seat is adjusted comfortably and tightened securely.

✓ All tires are properly inflated. (For shipping purposes,

the tires were overinflated at the factory).

✓ Be sure mower deck is properly leveled side-to-side/

front-to-rear for best cutting results. (Tires must be

properly inflated for leveling).

✓ Check mower and drive belts. Be sure they are routed

properly around pulleys and inside all belt keepers.

✓ Check wiring. See that all connections are still secure

and wires are properly clamped.

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is filled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls, their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

✓Be sure Operator Presence System and Reverse Op- eration System (ROS) are working properly (See the Operation and Maintenance sections in this manual).

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents PO17542LT II. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationIII. Children ServiceIV. Towing Table of Contents Steering Wheel Unassembled PartsBefore Removing Tractor from Skid AssemblyTools Required for Assembly To Remove Tractor from CartonCheck Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Towing Carts and Other Attachments Reverse Operation System ROSTo Operate on Hills To TransportTo Start Engine See Fig Before Starting the EngineCheck Engine OIL Level ADD GasolineMowing Tips General Recommendations MaintenanceBlade Removal See Fig BatteryTractor Blade CareLubrication Transaxle MaintenanceEngine BeltsMuffler CleaningClean AIR Screen AIR FilterTo Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig FRONT-TO-BACK Adjustment See Figs To Level Mower HousingTo Check Brake To Replace Mower Blade Drive Belt See FigTo Replace Motion Drive Belt See Fig Front Wheel TOE-IN/CAMBER Transaxle Gear Shift Lever Neutral Adjustment See FigTo Adjust Steering Wheel Alignment To Start Engine with a Weak Battery See FigTo Replace Headlight Bulb To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorEngine OIL StorageOther Fuel SystemTroubleshooting Points Excessive Service Notes Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationLimited Warranty

9601210000, 430673 specifications

The Poulan 430673, also known by its part number 9601210000, is a noteworthy product in the outdoor power equipment market, specifically designed for lawn care enthusiasts and landscaping professionals alike. Known for its durability and efficient performance, this model has gained a reputation for reliability over the years.

One of the main features of the Poulan 430673 is its powerful engine, which boasts a robust output ideal for tackling tougher lawn maintenance tasks. With adequate horsepower, users can confidently manage a variety of yard sizes and grass types without experiencing a drop in performance. The unit is designed to provide consistent power, ensuring efficient operation during extended use.

Furthermore, the Poulan 430673 incorporates advanced technology that enhances user experience and overall performance. The engine features a patented starting mechanism, often characterized by an easy-start function, allowing users to quickly start the machine without the frustration that comes with traditional recoil starters. This feature especially appeals to those who may not have extensive experience with outdoor power tools.

The ergonomic design of the Poulan 430673 reflects an understanding of user comfort and ease of handling. It is equipped with a comfortable grip and lightweight structure, minimizing strain during operation. This practicality makes it easier for users to navigate around complex garden layouts or longer work sessions without physical fatigue.

In terms of safety, the Poulan 430673 also comes equipped with several features aimed at protecting the user. A safety switch prevents accidental startups, providing peace of mind when transporting or storing the unit. The design actively promotes safe operation, encouraging users to adhere to necessary precautions while maintaining their yards.

Additionally, this model stands out due to its compatibility with various attachments and accessories. This versatility allows users to customize their experience based on specific yard needs, whether it's clearing debris, edging, or mulching. The adaptability of the Poulan 430673 makes it not just a single-purpose tool, but a multifaceted piece of equipment that can grow with the user’s gardening or landscaping projects.

In conclusion, the Poulan 430673, with its powerful engine, user-friendly features, ergonomic design, safety measures, and compatibility with various attachments, serves as an excellent choice for individuals seeking reliable outdoor power equipment. It embodies a perfect blend of technology and practicality, making it a favored option among both casual gardeners and serious landscapers.
Top Page Image Contents